Question about SAMTRON 77V 17" CRT Monitor

1 Answer

Monitor goes to sleep after hackers attacked..

Hi,
While I ran a Knoppix live CD (Unix) on my eMachine, which workd fine for months; suddenly the monitor goes off line, the screen goes black right after booting up into GUI mode.

Have you seen this before?
Reg

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 138 Answers

This is the way how to check what's wrong with your monitors. After you turned it on and the screen went black, you have to check that if you can see the image on the screen or not by shining a flashlight into the screen, not directly but find the best angle to the screen and take a look very closely. If you can see the icons or any image, there will be a minor problem. This is because of the lamps inside screen. Some of them were broken and it is very easy to replace. If you cannot see anything on the screen, there'll be some problems with inverter board. If you have soldering tool and want to fix it by yourself, check the caps first. It may cause this problem. Some caps might show leaking or burn spot on the board because of too high temp. If you don't have soldering tool, you better go get a technician to do so. Hope this help!! If anything I can help you with, feel free to let me know.
Thank you,

Posted on Mar 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a hp 2009m monitor and i want to connect it to an emachines t6212


Verify you have connected the VGA cable to the VGA output of the computer.

Feb 05, 2013 | HP 2009M Monitor

1 Answer

My HP W1907 monitor works fine until I try to play The Sims 3 game. I play for several minutes or hours and the monitor shows the message that it is going to sleep and the light on the monitor goes...


Hi there. I had the same problem months ago when I try to play high end games like Sims 3 my monitor goes into power saving mode. I tried to check every possible causes of the problem. It could be that your computer is overheating try to clean your computer and check if your fans still works. Second it could me your power supply malfunctioning, maybe it does not meet the required power to make your game work. Last cause is your video card malfunctioning, what I did is to just buy a new video card and it works.
If you do not have spare power supply or video card you can go to a computer repair shop for them to check the possible problem that causes it to go into power saving mode. It can also save you money before you can buy a new one.
Hope this helps, Have a good day!

Oct 03, 2010 | HP w1907 LCD Monitor

1 Answer

My monitor will not stay on, it goes on sleep mode


Hi,
Your problem may be due to the sleep button in your keyboard may got struct into when you cleaned your keyboard.
Try to resolve the struct in the keys, if any.
Restart your system and if still your problem persists, then remove your keyboard and restart your computer and try with some other keyboard if possible. Once if you find out that the problem is with your keyboard, then replace the keyboard / service the existing one.'

I hope this is helpful to you. Please provide your ratings.
Thanks

Apr 05, 2010 | E-Machines eMachines Monitor E15T4

1 Answer

E-machines monitor shuts down


go into the control panel and into the power options and make sure that the hard drive doesn't shut off and that the machine doesn't go into sleep mode and see how that goes.


Sep 03, 2009 | E-Machines eMachines Monitor E15T4

2 Answers

Light on monitor button is flashing but no picture on screen


check to see if you system is on ... might be sleeping ... second restart the computer and check your connections .... let me know if this helps

Jul 31, 2009 | E-Machines eMachines Monitor E15T4

1 Answer

No DVi input, then computer goes to sleep


Hi publicworker,

I had a similar problem whereas my monitor went to sleep mode after a few minutes. I'm running an HP LP 2065 in dual mode with another HP flat screen. However, I did resolve the issue after resetting the output settings.

How to do that:
  • right mouse click on the desktop
  • select graphic options
  • output to
  • extended desktop
Maybe some changings/modification will help you too.

Stefan

Jan 31, 2009 | HP 2025 20.1" Flat Panel LCD Monitor

1 Answer

My W2207 monitor keeps going to sleep


Hi,First there is no signal from the PC . check if the display card has come out while moving the monitor, or just reinsert the display card in the PC , then boot the pc .

Jan 14, 2009 | HP w2207 Monitor

1 Answer

No Input Signal


Dont Panic it is Nothing...
Your Monitor is safe...
If it say "no Input signal" - "Check VGA cable"

it means that the Monitor is finding signals from the computer,and the cable is either not connected or unsecurely connected.

Jul 18, 2008 | Chi Mei Corporation 221A Monitor

1 Answer

Going to Sleep


got the same issue

hp pavilion 1723

Nov 01, 2007 | HP Pavilion F1903 19" Flat Panel LCD...

Not finding what you are looking for?
SAMTRON 77V 17" CRT Monitor Logo

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samtron Computer Monitors Experts

William Miller
William Miller

Level 3 Expert

8820 Answers

Richard Lilja
Richard Lilja

Level 2 Expert

355 Answers

Ted Maxwell

Level 3 Expert

3515 Answers

Are you a Samtron Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...