Question about LG 50PX4DR 50 in. Plasma TV

2 Answers

Wont come out of standby

Describe your problem
The red standby light remains constant when the set is in standby mode, but when i try to switch on, the light flashes between orange and red and the set fails to come on. I can hear what sounds like a fan come on for a few seconds and then it switches off. The lamp light does not illuminate although i have had the set some 3 years and never replaced the lamp. Could anyone help please


stuck on stand by

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Haw is radio oprate

Posted on Dec 05, 2013

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 21 Answers

Hi there, Im Kanth, i had the same problem, and i found a person in Mississauga, they fix all kind of problems in Plasma, they fixed my LG before a 7 months, its still running good, i came to know lots of ppls were having same problems, i sujest u to being the plasma to electronics @ Dixie and Britannia Mississauga, call them now 905 565 6595 or check there wesite for more info. http://dukeelectronic.com

Posted on Apr 22, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sony kp41s5u rear projection tv constant blinking standby


Power supply or set is not allowing set fully on as a problem in any of a number of areas in the set. Try unplugging set for a while to see if that helps or have a tech look at it.

Dec 23, 2012 | Televison & Video

1 Answer

Power switch


The red standby light is always on. It should only change when you press 'power'. When you turn it off, it is on 'standby', meaning you can switch the switch to make it start-up in play or record mode by using a timer and the switch below the power switch. This is normal for Sony.

Feb 24, 2012 | Sony MDS-JE330 Mini Disc Player

1 Answer

My pioneer plasma tv in standby mode and wont turn on


Try restting it by unplugging the tv for a few mins and it should rest to original factory default settings but leave it unplugged 10-15 mins to be sure.

Dec 18, 2011 | Pioneer PDP-4270HD 42 in. Plasma...

2 Answers

I have a schaerer opal coffee machine, when I switch the machine on, the water light flashes, and a pump runs continuosly as if it is trying to purge the machine. but nothing comes through. does anyone...


I have a schaerer opal coffee machine, when I switch main power machine on, the descaling indicator, cleaning/rinse indicator and stand-by mode indicator lamp remains lit, and a pump runs continuosly. the machine do not ready mode indicator. Yudi INDONESIA

Apr 05, 2009 | Schaerer Opal Espresso Machine

1 Answer

Infinity tss-1100 sub problem


hey buddy, I have the same system, and although I haven't experienced it on this one, I had the Harman Kardon equivalent to the TSS-750, and the sub did this same thing. It was a loose RCA connection, and, as I was well outside of warranty, I took the amp out of the back and just re-soldered the connection myself. It now functions flawlessly for my bedroom setup. I hope you get it all worked out on your system! I can't imagine using this awesome system without its deep notes!

Jan 07, 2009 | Infinity TSS-1100 System

1 Answer

Permanent standby


The machine is in a "fault mode", as you have figured, but it's much more likely that a motor has not completed it's cycle upon power-up. It's also possible that the load carriage is out-of-time, and will need to be set according to manual specs...accordianman

Dec 14, 2008 | Televison & Video

1 Answer

Service menu


Hi,
How to Enter Service Mode
1. Turn on the main power switch to place this set in standby
mode. (LED will light in red.)
2. Press the buttons on the commander as follows, and enter
service mode.

PRESS these buttons in sequence

ON SCREEN DISPLAY---> (DIGIT 5) ---> (VOLUME +) --->STANDBY

Method of Cancellation from Service Mode
1. Set the standby mode (Press “ (TV STANDBY)” button
on the commander), then press “ (TV STANDBY)” button
again, hereupon it becomes TV mode.


Thanks

Oct 29, 2008 | Sony KP-53HS30 53" Rear Projection...

1 Answer

Wont come out of standby


The problem is most likely a defective lamp. See your owners manual on lamp replacement as this can be done by the consumer.

Dec 05, 2007 | LG RU-44SZ51D 44" Rear Projection...

Not finding what you are looking for?
LG 50PX4DR 50 in. Plasma TV Logo

683 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Televison & Video Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

71117 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18344 Answers

Are you a LG Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...