Question about Tomtom ONE GPS Receiver

1 Answer

Startup screens I just arrived in Hawaii and started up the Tom Tom One. It seems to work ok and find the location, routes, etc. However, for some reason, every 10 seconds or so, it displays a start-up screen sequencec that seems like Tom Tom marketing stuff...like instructions on how to get started, select voices, check traffic, find restaurants, etc. If I tap the sreen I get back to the route, but then a few seconds later, it goes back to this sequence of screens. Any ideas? Thanks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 3,587 Answers

How to contact Support
startup screens - icon_register.gif Need information on how to use this site? Or how you can contact us? Follow the link below or call
call_small_off.gif866-486-6866startup screens - inactive_r.gifc="http://i.fixya.net/uploads/images/inactive_r.gif" alt="inactive_r.gif" class="h_mi" />

Posted on Mar 16, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will not plot route in mexico


I assume it works ok in the U.S., and most of Mexico. Assuming that, it will be one of two things. 1. Either the locations are not programmed into their software, or you need an update to your GPS. My guess is that they haven't updated yet. I would message Tom Tom to let them know your concerns- sometimes the squeaky wheel gets the grease. Good luck, know it's aggravating.

Mar 25, 2010 | Tomtom XL 330 Car GPS Receiver

6 Answers

Keeps displaying cannot get valid gps signal was working fine last week now does not work


i work as a truck driver on a small fleet of 7 vehicles in the midlands UK

3 of us have Tom Toms, the others have medion, navman or garmin.

ALL the tom tom users have been experiencing GPS problems this week ( june 21 onwards ) whilst the rest of us have seen no change in GPS satelite availability.

In addition, a friend who uses a TOM TOM One XL in another part of the UK has also had same problems.

Its a TOM TOM problem generally it seems, and NOT your particular piece of kit.

Jun 25, 2009 | Tomtom ONE GPS Receiver

1 Answer

My tom tom ONe cannot get a valid Satelite Signal just stays wait


If you are indoors then move outdoors to get a signal.

If you are outdoors then move your location by a few yards and sometimes it will suddenly aquire the satellites.

Happens occasionally with my unit. I normally set a route up then start driving and it suddenly starts to work OK.
HTH
Peter

Mar 07, 2009 | Tomtom ONE GPS Receiver

1 Answer

Confused tomtom


Yes the battery in your TOM TOM needs to be replaced. You can ship it to TOM TOM or go to there site and put the service request in for it. Hopefully it might be under warrenty still

Feb 13, 2008 | Tomtom One Europe v2 GPS Receiver

2 Answers

Tom Tom ONE Version 3


Have you tried resetting the unit? Does it do the same thing after being reset?

Nov 25, 2007 | Tomtom GO 910 GPS Receiver

1 Answer

No gps signal


http://www.tomtom.com/support/solution.php?GID=1&PID=1682&SID=0&CID=223&Language=1&query=wont+navigate&FID=386

Nov 04, 2007 | Tomtom GO 700 GPS Receiver

7 Answers

No gps signal


I have had my GPS( TOmTOM One) on Waiting for Signal for 2 weeks now and I finally fixed it.

My symptomtoms (word play) were no signal at open areas, when connected to Tom Tom Home it showed exactly where I was and worked through the PC but when disconnected back to the same thing.

I called Tom Tom CS and nothing, FLash did nothing, factory defaults nothing, and updating did nothing.

What I did:
I charged the unit completely.
I took a paperclip and while off pressed on the reset button at the bottom by SD slot. I held it there for 30 mississippi's.
I did not turn it on after letting go.
I went outside to my car (parked on roof of parking lot) turned it on and set it on my dash vertically.
I left and came back in 1 hour and wallaaaaa. It is working perfectly!

Let me know if this fixes it.
xgranados@entouch.net

Oct 03, 2007 | Tomtom Go Plus GPS Receiver

Not finding what you are looking for?
Tomtom ONE GPS Receiver Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tomtom GPS Experts

LP

Level 3 Expert

485 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

63801 Answers

Are you a Tomtom GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...