On Epson Perfection 1250/165o series ,Twain error,component ICM-2, File Group EW-Profilew ,File ,Error the filename,directoryname or volume label systax is incorrect.

1,Download and install the latest driver for EPSON Perfection 1200.(TWAIN Driver v5.53A)> http://www.epson.com/cgi-bin/Store/support/

Note:The scanner must be disconnected from computer during the installation of this driver.
2.Next download and install Epson Scan! II 32 Utility v2.35E

Windows is entirely in control of any blue screens; so the hardware spec is not relevant yet.
can you try reading your windows event log immediately after a crash? :::Start>all programs>administrative tools>event viewer

you are looking for an error mentioning a filename... C:\windows\~somepath~\Minidump.dmp
If you get yourself a copy of WinDB (here: http://msdn.microsoft.com/en-us/windows/hardware/gg463009)

You can then open WinDB and open/read that crash dump file (file open crash dump), and it will provide you with a filename of the driver that caused a problem (possibly even tell you what it was doing when it was called).. chances are it's one of the following causing the problem: Graphics Card drivers Storage controller drivers Motherboard drivers (Power Management related issue usually)
If you have the latest driver; then get the hardware checked out...

Check to see where it is writing to (which directory) and make sure the directory exists and you do not have duplicate filenames. Check the free space on the drive you are writing to. Run an error check on the drive. If it is a shared folder/directory then check your permissions.

Hello,
Vuescan is probably a good solution for you then:
http://www.hamrick.com/
Hope that helps

Pop over to the epson support page and download your drivers.
I HATE scanners when they start to act up, printers are sooooooooo easy, but scanner/twain problems arrrrrggggggggggggggggggg

Good luck

I don't think it's any of those things. I think it's a Twain Data Source problem. When you install the software for your scanner, make sure you also install the twain data source files. This is the scanning protocol used by all scanners and if not present, the scanner won't import images into Photoshop under the command "File" -> "Acquire."

I got mine working on Windows 7 (x64) by doing the following:
1. Download the Windows 7 Epson Scan driver for the Perfection 2400 from the epson site 2. Install the drivers 3. In Start Menu->All Programs->Accessories right-click Notepad and select Run as administrator 4. In Notepad File->Open and browse for the es27.inf file located in C:\Program Files (x86)\epson\escndv\es0027 5. On line 51, 54, and 57 replace PID_011B with PID_0101 6. Save the file. 7. Connect and turn on the scanner. 8. In Device Manager (Start Menu, right-click Computer, select Properties, Device Manager) right-click the scanner and select Update Driver Software->Browse my computer for driver software 9. Select the location of the modified INF file (C:\Program Files (x86)\epson\escndv\es0027 Include subfolders checked). 10. Say ok to the window that pops up and it should start installing the drivers.
In Photoshop you should then be able to import using WIA-Epson Perfection 2400 (importing with Epson Perfection 2400 causes Photoshop to freeze)
I hope that works for you :)
Stephen

Dear sir,I am sory for your problem.Please format your oparating system i mean you install new windows.some times optical driver did not read properly data cab file,So hardware driver is not support properly.Windows xp SP3 is not complite version some messing.
Thanks You are success
Tareq

Can you run a test through the scanner and camera wizard?
If so you are using a WIA driver and a registry entry is being blocked.
Look for an error log file in the Epson driver folder.
It may show the entry that has been marked read only.
If so just uncheck the read only mode and re-install software.

Possible driver issue. You have to reload the twain driver.
To uninstall the twain driver, please follow the ff instructions:
- Trash epson scan and epson scanner monitor from the harddrive
- Go to the library, then application support. Trash epson scanner module.
- Go to the library again, then image capture. Trash twain data sources.
- Go to the hd. Click on users. Click on the name of your computer. Click on library, then preferences, then epson. Trash epson scan.
Empty the trash and restart your mac.
When your mac is fully back on. Go to http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=88368&prodoid=63070478&BV_UseBVCookie=yes&infoType=Downloads&platform=Macintosh&x=23&y=13 and you are now ready to install the Scanner Driver and EPSON Scan Utility v3.27.