Question about Barebone Systems

1 Answer

Im trying to scan or copy from a book to the priter thought it wont happen

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 26 Answers

Hello,
I could not get my HP scanner to work and found out it will only scan and send the file to my PC when directly hooked up and not through a printserver.
I don't know if you were trying to do this but it would have saved me three days with HP online help if I would have known it was not possible.
Good luck...

Posted on Mar 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

CPU Power, Changing to a lover voltage CPU


Hi there
Firstly update the bios, then install the new CPU, go into the bios settings and set them to default, that will auto adjust the computers settings, then you can have a look in the bios again to make sure the voltage is running as preferred.

Good luck and thanks for using Fixya!!!

Feb 09, 2009 | FIC IC-VG61 (dhicecube) Barebone

3 Answers

Unlock Code for access to Computer


Resetting the CMOS can be achieved via removing the 'button cell' battery for 10+ minutes OR enabling a jumper (pin connector) on the motherboard, this will clear the PCs setup configuration and require you to reset the parameters.

Re-installing windows will only effect the OS (software) environment, if your question is HOW to bypass a users/administrators password... I shall respectfully decline that information.

Jan 23, 2009 | ASUS Z81L Barebone

2 Answers

Mbox 2


dkjkjd jheuj'y je

Jun 13, 2008 | Digidesign Mbox 2 Barebone

1 Answer

My asus d1500t wont startup


Most likelly your motherboard went bad, but you can try somthing else before replacing your MB.
1. Remove your battery and try to power up. Your battery might be shorted.
2. Remove your hard drive and try to power up.
3. Remove your CDROM and try to power up.

Good luck.

May 28, 2008 | ASUS D1 500 (ap d1500) Barebone

1 Answer

I have a canon mp460 printer that i have just re'filled and i am still gettin the 'ink running low' message on screen. how do i resolve this problem?


On the maintanance screen is there a "Ink counter Rest" tab. It must be clicked on as soon as you put the cart back in.

I also got the following from a website out there:

1) Enter SERVICE MODE by pressing sequentially Menu Copy Scan Copy Copy or Menu Copy Copy Copy Scan (on some models)
2) Select TEST MODE.
3) Press ‘+’ 8 times till ‘Select [8]’ PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [OK] key.
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.


Hope that fixes it for Ya...

Geno

Mar 27, 2008 | Barebone Systems

1 Answer

I recently purchased a Lexmarrl X5400 printer.I can make a copy using ADF feed, but when I try to scan , I get a message that says, "Cannot retrieve applications" Please tell me how to rectify this...


I believe you must select a different application to use for the Scan.
Click the cancel
From the ALL-IN-ONE center scanning and copying tab, choose a different application from the "SEND SCANNED IMAGE TO" menu.

Mar 19, 2008 | Barebone Systems

1 Answer

Once I scan my document and send it to another file the document is bigger then the page


check your scanner settings; your DPI setting is probably too high. decrease it to one of your presets, like copy, black and white scan, or even fax, at about 100 - 200 dpi, and you should be fine.

Mar 09, 2008 | Barebone Systems

1 Answer

My shuttle wont boot


If it's a new build, can you give details on processor etc. But if there is no bios, it's normally a memory incompatability problem, or the processor isn't active.

Jan 08, 2007 | Shuttle SN41G2V2 Barebone

Not finding what you are looking for?
Barebone Systems Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Barebone Systems Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

john smith

Level 2 Expert

366 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Barebone System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...