Question about Barebone Systems

1 Answer

My printer was installed. now my computer says it not. the problem is that my install disk got destroyed. what do i do to reinstall it?

Posted by on

  • Hillkarben Mar 08, 2008

    I should maybe mention that its a lexmark X1270 all-in-one printer that i'm haveing the trouble with...

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi,

You need to download the appropriate drivers from the Lexmark website and install it in to your PC. Once their homepage has opened up, pls move your mouse over to the "Drivers & Downloads", click on "Driver Finder", Enter your printer model in the "Search for your Printer by Model Number" and click on "GO". Click on your Operating System. After successful download, click the file to install. Pls follow on screen instructions.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Posted on Mar 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My hp laptop 6735s displays hard disk error


Replacing a disk is pretty simple. Look at the bottom of the case, there will be an area that has screws you can remove to access the disk. Carefully remove it, disconnect any cables and take it to a computer store and get another one. Reinstall
You now have a computer with nothing installed. If the old disk is readable, you might be able to get the information "cloned" onto the new disk before you install it. This will require some skill and a couple of tools. It is best left to a local computer person.

Hope this information will help.

Your response is very much appreciated. Thank you for using Fixya...

Oct 01, 2011 | HP Barebone Systems

1 Answer

How to instal the printer if we lost a driver of printer in hp


when the computer ask for the disc click on check the web for software . apart from that you can go to hp.com direct click on drivers and it will ask you for the driver your after and it will install it for you.

ps remember to save the file to disk so you can use it again in the future if your computer crahes or you just need to re install the printer driver

Jun 18, 2010 | Barebone Systems

1 Answer

Hi , Please can somebody help me i have just purchased a hp photosmart d5160 printer but it will not fully install , when asked to plug in usb vista detects new hardware but can not find the drivers on the...


Introduction Download a printer driver package and then install the printer drivers on a Windows Vista computer. Downloading the printer driver package and installing the printer Step one: Download the printer driver package
  1. Go to http://www.hp.com .
  2. Click Software & Driver Downloads .
  3. In the for product text box, type your printer model and then press Enter .
  4. Under Product search results , click your printer model.
  5. Click Microsoft Windows Vista .
  6. Under Driver , click the name of the driver.
  7. Click Download only .
  8. Follow the instructions that display on the screen.
Step two: Extract the files
  1. Double-click the self-extracting .exe file downloaded in Step one.
  2. After the Welcome screen displays, click Next.
  3. On the End User License Agreement screen, select the I accept this agreement check box and then click Next . The drivers start installing.
  4. After the Completing the Device Driver Installation Wizard screen displays, click Finish .
Step three: Install the printer drivers
  1. Verify that the printer is turned on.
  2. Connect the Universal Serial Bus (USB) cable to the printer and to the computer.
  3. A Your devices are ready to use window might display on the screen. If the window displays and does not close automatically, close the window.
  4. Print a test page to verify that the printer is working correctly.

Mar 24, 2008 | Barebone Systems

1 Answer

I have a canoScan 3000/3000F scanner that I want to install on my new computer. When I put in the disk it doesn't instal


remove and reinstall your printer driver software. follow closly in the setup section.

Mar 09, 2008 | Barebone Systems

1 Answer

Printer driver not working


Hi there, i dont know if this is of any relevence however, i have just spent the whole afternoon trying to install my new printer, every time i installed my disk a little icon popped up saying usb didnt recognise the device, despite endless frustration i did it another way, If your printer is a usb connection then before inserting the disk connect the printer to the computer and switch on, this then brings up the wizzard which should help you install, if this doesnt work...trust me it took me ages, try different usb ports, i finally found one that picked up the printer, after it detected the device i was then able to continue with instalation via the disk and wohoo many hours later i have a printer, unfortunatley i have now run out of paper doh!!! i hope this helps someone :-)

Mar 03, 2008 | Barebone Systems

1 Answer

Cannot install printer software ,tells me a newer version of software is already installed .this is a HP pavilion computer using windows xp home addition and a hp psc 1350 all in one. I uninstalled the...


Hi,
try uninstalling any software relating to the printer.
shutdown the computer. Remove any printer to computer cables. Re-boot ( startup ) the computer.
let it set itself up. then shutdown.
turn off the power to computer, put your printer cable back in, as if you were installing it for the first time.
the computer should have found new hardware ( your printer ) And ask for a driver. ensure your HP disk is in the drive, and ask to search Drive D:- Or E:- wherever your CD is located.
If it,s already got the latest drivers installed, i would,nt worry unless your printers not functioning correctly.
Mike @ Compurepair.

Feb 19, 2008 | Barebone Systems

1 Answer

HP Printer Conflict


Perform a clean and "No bloated" installation of the hardware.
Uninstall ALL the HP printer software, disconnect the PSC and reboot the computer.
When windows finish to load, connect the PSC again, the new hardware wizard will show up, follow the instructions with the HP Installation disk in the drive.
IMPORTANT: When a silver sand glass show up in the screen, CANCEL the installation of the HP software (this is by clicking "CANCEL" button or by no accepting the license terms). This will install only the PSC Drivers and nothing else.
Try printing again.

Feb 15, 2008 | Barebone Systems

1 Answer

HP Deskjet 840c - Printing Emails


I did see you reinstalled your software) but please continue
It is important that you have that icon by the clock. Power off the printer by pressing the power button on the printer.
Please un-install your printer software through Add/Remove Programs within the control panel. Please restart the Pc after un-install is complete. Create a folder on your hard drive and name it, "HP DeskJet 840C". Go to this link listed below & download the printer driver software listed. When you save to disk you can choose where you want to save. Pick the folder you created. Save inside this folder. The HP driver (Will most likely be updated software). I promise, you will have a icon down by your clock when finished.
http://h10025.www1.hp.com/ewfrf/wc/product?product=59868&lc=en&cc=us&dlc=en&submit.y=4&submit.x=7&lang=en&cc=us
Follow the instruction in your manual for setup & installation.
If you using Outlook Express & you want to print or send through your printer the page should be set as 8.5x11". Orientation should be set to Portrait, unless you set this for A4.
Lastly, please turn off your anti-virus software during install & re-install. Just in case you come back to this thread!
please vote...

Jan 30, 2008 | Barebone Systems

1 Answer

I recently had trouble with my computer and did not realize that my printer had been un-installed, on trying to reinstall printer from disk everything runs ok to begin with then it comes up printer cannot...


go into device manager and delete your drivers for printer. then reinstall drivers from disk. or download drivers from manufator and reinstall.

Jan 27, 2008 | Barebone Systems

1 Answer

Gentlemen: I purchased a model i470D printer from a local Staples store that was a display model that was out of carton with no installation instructions disc. I recently found it necessary to have...


Ok if your printer is usb, then you need to install the software FIRST before plugging the printer into the computer via usb.

Gotot this website

http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=232&modelid=8739

On the right it will say what OS do you have. Select your operating system. DOwnload the driver for the printer. Prolly the first one displayed, then download the driver. Install it. Restart your computer, then plug the printer into your computer via usb. I hope this helps. If not please contact me so i can help you further!!! Let me know how it goes!!

Jan 26, 2008 | Barebone Systems

Not finding what you are looking for?
Barebone Systems Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Barebone Systems Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

john smith

Level 2 Expert

366 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Barebone System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...