Question about Uniden Cordless Phone

2 Answers

We have recently purchased a brother mfc-240c, and as far as i no i have installed it correectly yet when trying to use the fax it dails a dead tone and continues to redail but doesnt send, and we urgently need it to be up and running any advise im not to ad with computers but dont no much aboyut faxes

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Although I have a Brother 420CN that I had similar problems with, the instructions for checking the lines remain the same I'm sure. Double check the telephone outlet by plugging in a separate phone connection. If there is a dial tone, you know the line is good. Next double check that you have the Ext Line cords on the fax machine input correctly.
Make sure your fax cord runs directly into the telephone jack on the wall - do not plug fax cord into a 2 way or 3 way adapter to the phone jack. You can however use a line filter (cord with jack plug that's usually provided by the manufacturer - check your phone box if you still have it) and plug the fax cord into that.
Eventually I did manage to get this to work for me - after numerous tech support calls to my phone provider!

Posted on May 23, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 65 Answers

Make sure you have a dial tone by plugging a different phone into the jack. then make sure you have it plugged into the jack on the fax that says line.

Posted on Mar 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No phone service and no dail tone


Hello,
Two questions for you: Have you called your cell phone company in order to activate your phone? If you purchased your cell phone at a store, did they offer to activate your phone?
Try either of these and see if activation is your problem.
Regards, Dana

Dec 31, 2010 | AT&T Phones

1 Answer

No Dail tone on Line 2. We have 4 lines in total. Today when we pick up line 2, it's open and there is no dial tone. How do we fix this?


It's a good bet that the line is dead before it comes into the building. Call your service provider and start a trouble ticket.

May 05, 2010 | NorStar T7316E Corded Phone

1 Answer

Line in use


Your installation may be faulty. If you have to connect the phone to the MFC make sure that the wire that comes from the wall outlet is plugged in the LINE socket on the machine. A wire must then come out from the Phone Socket on the MFC to the phone.

If you do not use the MFC as a fax machine, better disconnect it from the phone line. Connect it only at the time you have to send a fax.

Jan 04, 2010 | Panasonic KX-TG2631 Cordless Phone

1 Answer

No dail tone


foloowing reasons to check for
1.wire disconnected
2.reciever connected properly
3. line is dead
4.try using another telephone instrument
5.if line is dead then call the company

Aug 04, 2009 | Phones

1 Answer

Samsung 816 power outage dailing an outside line


First thing you should verify a dial tone on the fax machine. (use any analog phone)
If you have dial tone, press 9 and then a number
Second is it conected through tel. system? (did it have an internal extension) and there is no dial tone then your analog port may be fried. Call your telephone vendor. He should be able to help you.
You can purchase a manual for about 10 dollars
Email your system model number to sales at aaa-avad.com for further instructions

Mar 31, 2009 | Samsung Prostar 816 Phone

2 Answers

Our company has a Panasonic kx-t7731 main line has no dail tone.


On that phone, press PROGRAM the button and dial 01 STORE.

Press program again to exit programming.

It's not likely you'll be needing the Group Log In/Out button.

Carl

Mar 12, 2009 | Panasonic KX-TA824PK Phone

1 Answer

2 beeps, no dial tone


hand set no dail tone cant all out on the hand set due to no dail tone

Dec 05, 2008 | Uniden Cordless Phone

1 Answer

VTECH VT-2406 TONE- PULSE SETTING ?


http://www.vtechphones.com/vtechui/support/manual.cfm?manualID=373

Jul 03, 2008 | Vtech VT-2406 Cordless Basic Analog

2 Answers

TC1200 TONES/PULSES


There is usually a switch to change it from dial pulse to touch tone.If there is no switch check your user manual to see if there is a screen option.

tk46

Jun 19, 2008 | Panasonic KX-TG1033S Cordless Phone

1 Answer

Telephone


bring your phone to its service center.
have it check, maybe the problem is inside the telephone.
maybe it affected the inner core of the phone's board.
had a problem like that also,
we just brought it to its service center.
and they had to change some stuff..
then it worked again.
no charge if under warranty.
but its P500.00 if not on warranty

Dec 11, 2007 | Panasonic KX-T7630 Corded Phone

Not finding what you are looking for?
Uniden Cordless Phone Logo

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Phones Experts

kakima

Level 3 Expert

96396 Answers

Dave Ellis

Level 2 Expert

84 Answers

k24674

Level 3 Expert

7987 Answers

Are you an Uniden Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...