Question about Kyocera FS-2000D Laser Printer

1 Answer

ERROR CODE 7410:0004729

I HAVE KYOCERA FS 2000D AND IT SHOWS "CALL SERVICE 7410:0004729" AFTER EXPERIENCING PAPER JAM PLEASE HELP. I CAN'T PRINT.
nodicoh@yahoo.com

Posted by on

  • Anonymous Mar 12, 2014

    519

  • Anonymous Mar 27, 2014

    the printer had a paper jam and printing is showing faint

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 56 Answers

Hi, switch off printer ,just open cover(door) on the left side of the machine and push Drum Unit in machine(to proper seat)
You have to hear "click" sound.Switch on printer.
Regards...

Posted on Mar 19, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a kyocera FS-2000D and an error 6000:0087166 what can I do...???


Error Code 6000 is fuser code, you need to replace the fuser unit, make sure there is no paper stucking there first!

Nov 10, 2011 | Kyocera FS-2000D Laser Printer

1 Answer

Hi, I have an ecosys fs 2000d, with a call service message 6000:0026965, somebody help me please


Call service message 6000 in Kyocera is a fuser error code. The fuser must have gone bad.

Regards,
Shrey

May 31, 2011 | Kyocera FS-2000D Laser Printer

2 Answers

I have a kyocera FS-2000D with error code: Call for service 0150:0000049. Help...thanks in advance


Error code 0150 is an engine EEPROM communication error. The engine board might need to be replaced. I have heard that sometimes a defective developer unit could cause this same error code. I would try swaping a develper from a working FS-2000D first.

May 20, 2010 | Kyocera FS-2000D Laser Printer

1 Answer

Error code 7410


Open the left side door, push in on the drum unit which is above the waste toner bottle until it clicks.

Turn printer off then on.

Jun 16, 2009 | Kyocera FS-2000D Laser Printer

1 Answer

Kycocera fs2000d


Sounds as if the fuser unit has a damaged gear.You will need to call out a technician.

May 01, 2009 | Kyocera FS-2000D Laser Printer

1 Answer

I have a Kyocera FS-2000D printer that will not print


first turn off your pritner power.
check open the front door pull your ink cartridge then clean dust and blur from it then check there is not any paper jam then refix ink cartridge.then turn on the power.

Mar 21, 2009 | Kyocera FS-2000D Laser Printer

2 Answers

Call service 7410:0100539 on a Kyocera fs2000d


I have heard that 7410 is a standard code meaning the drum is out of position. Seat the drum correctly and away you go.
David
www.copycare.net

Jan 21, 2009 | Kyocera FS-2000D Laser Printer

1 Answer

Printer not printing - showing 'processing' but nothing happening


Reinstall the driver again, if it doesnot work, you have to update the firm ware of the machine, you can find this on kyocera website.

Nov 25, 2008 | Kyocera Mita KYOCERA/MITA - FS-2000D Mono...

1 Answer

Error code 0159:0061914


I couldn't see a 159 error in the 2000d service manual, but I know 150 errors . They need to have their firmware updated, should be under warranty, their is a kyocera service bulliton on this issue so all agents can do your repair. It is just a matter of downloading firmware from kyocera. unzipping it to a mem stick or CF card and powering on your printer with it inserted, firmware then self installs.

The bits after the 159:is just page counter. Post Email if you want me to send you zippped firmware to suit.

Dec 21, 2007 | Kyocera FS-2000D Laser Printer

Not finding what you are looking for?
Kyocera FS-2000D Laser Printer Logo

751 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kyocera Office Equipment & Supplies Experts

Soulvisitor
Soulvisitor

Level 3 Expert

1113 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Henry Gertcher

Level 2 Expert

48 Answers

Are you a Kyocera Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...