Question about Xerox DocuColor 12 Printer
This is Kedar
Give me (Xerox DC 12 Error : 9-667) This Error Solution
Try to replace the print drum unit.
this is the information of the error code
9-667 VH/VM Out Of Range RAP
The selected LD value was out of range.
·Refer to BSD 9.1 and BSD 9.15 for the following procedure.
·Clean the ESV Sensor.
· Check that the P/J141 on the ESV Sensor, and PJ 422A on the IOT Drive PWB are firmly connected.
Perform the following in the order listed.
·Go to the IQ 38 Charge Corotron HVPS RAP and check the Charge Corotron HVPS for proper operation.
·Ensure that the Charge Corotron Wire and Grid are in good condition.
·Go to FLAG 6 and FLAG 7 on BSD 9.1. Check the wires for an open circuit or a short circuit. If the wires are good, replace the ESV Sensor ( PL 5.1 ). If the problem continues, replace the IOT Drive PWB ( PL 9.2 ).
·Replace the Drum CRU ( Machine Consumables).
Posted on Mar 10, 2008
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Sep 16, 2014 | Xerox DocuColor 12 Printer
Apr 12, 2011 | Xerox DocuColor 12 Printer
Aug 30, 2009 | Xerox DocuColor 12 Printer
506 people viewed this question
Usually answered in minutes!