I have 2 razr v3 phones can I clone the second phone for use on a river trip?

1. Take the cover off of the battery compartment.
2. Remove the battery completely for at least 60 seconds.
3. Re-insert the battery and close up the battery compartment.
4. Find the battery 'reset' button (usually a small depressed hole) and press it with the tip of a pen holding it down for at least 10 seconds.
5. Allow the phone a minute or so to re-set.
6. Try it again. This usually works.

hold the hang-up button down for about 3 seconds to turn phone off and on

Depending on how many modifications, hacks, or customizations that you perform on your Motorola RAZR V3 phone, there may be situations where the phone becomes unusable or completely locks up. I have had visitors to the site report not being able to delete ring tones, text messages, or have other strange behaviors with their Motorola RAZR V3 phone.

If this is you situation, then you may be interested in performing a master reset (or “hard reset”) on your phone. The master reset will effectively restore your phone back to the factory condition, inclusive of all settings. Be warned, any data that you have not backed up, photos you have not transferred, calendar settings, or messages you have not saved will be lost! Make sure you do this first, if possible!

Here is how you perform a Master Reset on the Motorola RAZR V3:
1. Open your phone up and go to “Settings”
2. Next go to the selection for “Initial Setup”
3. Next go to the selection for “Master Clear”
4. Then select to confirm the option.
5. Now enter the security code which should be “000000”
6. Finally press select or ok and the phone will reset itself to the factory condition

Congratulation you have performed a “hard reset”, “hard reboot”, or “master reset” on your Motorola V3 RAZR and it should return to normal operating mode!

Trackbacks that led to this post:
hard reset motorolla razr v3
hard reset razr phone
wii master reset
hard reboot motorazr
how to hard reset a razor v3
master reset code for motorola v3
master reset code razr v3
master reset for v3 via pc
master reset motorola razr 2
master reset v3 razr with white screen
motorola v3m master reset
p2k commander
razor master reset
razr 3 and how to reset
razr master reset ebay
razr master reset password
razr master restart
razr screen master reset
reset razr
reset razr to factory
reset razr v3 to factory
v3 hard reset razr
v3 razr reset hard boot

‎

the firmware needs to be flash into teh phone take the phone to a mobile service center and have it fix.

take out your memory card and try it

when i wanna install game or other applications into my k800i, it gave me sad responses, it shows 'operation failed'. then i cry.

try a master reset of the phone or delete all BT devices in your list....hopefully this corrects the issue

take the phone to a mobile repair center and have them service the phone for you and see if that helps.

Try removing the battery for a few seconds then restart the phone. Other than that, it could be a defective switch on the phone that detects when it's closed. If it answers / hangsup when the opened or closed... the switch is good.

Geno

try these guy's steve http://www.unlockcentral.co.uk/