Question about PC Desktops

3 Answers

Dyne Mouse Problem

I can not get my Toshiba Satellite M115 laptop computer with Vista to complete the install of the plug and play driver for the Dynex optical mouse DX-PMSE.

Posted by on

  • smoochiedee May 13, 2009

    I have the same problem, when plugging in my dynex dx-pmse mouse, i get the following windows message.

    "windows found the driver software for your device but encountered an error while attempting to install it"

    An error occurred during installation of the device:
    The driver installation file for this device is missing a necessary entry. This may be because the INF was writeen for windows 95 or later. Contact your hardward vendor.

    I have contacted dynex over a week ago, but havent received a reply yet. I looked at there driver download page and they dont have an update for this model of mouse.

    any help you can give will be greatly appreciated
    regards

    Dee

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

I have a similar problem which I seem to have fixed.
I have a Dell laptop and was using a borrowed retractable-cord laptop mouse. I unplugged it and plugged in the Dynex DX-PMSE and got the same message as you describe. For me, what fixed it was that I went into device manager and removed the old mouse, so I only had the touchpad showing for pointing devices. Then when I plugged in the Dynex mouse, it worked pretty much right away!

Posted on Jun 19, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 91 Answers

A mouse doesn't need a special driver, try uninstalling it from device manager and refresh.
or plug in to another usb port.

Posted on Mar 08, 2008

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 34 Answers

Please describe in detail. incomplete description give unclear picture of the issue

Posted on Mar 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Need a Manual .where to get a free manual for a Toshiba intel centrino duo model no.PSM80u-015007 satelle M115


You should be able to find a PDF manual here:
http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp
Catagory-laptops
Family-Satellite
Model M115-
There is more to the model # like S....
Enter the whole model number and you can choose a PDF manual.

Mar 31, 2011 | Toshiba PC Desktops

2 Answers

HOW TO REPAIR A CRASHED A205-S5809 TOSHIBA SATELLITE. WOULD LIKE TO KNOW HOW TO RESTORE IT TO FACTORY SETTINGS WITH OUT RESTORE DISK


If you have Windows installation CD and the product installation code then -
Install Windows XP then download the device drivers for your model laptop and install them on your laptop. You can use a another computer with Internet access then copy and install them on your laptopYou can download the drivers from the Toshiba WEB support/download page. Make sure you select your model laptop and the XP or Vista Windows version of the drivers you require and install them. Click on this link to download the drivers: -
Normal 0 http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp

Oct 09, 2010 | PC Desktops

1 Answer

Toshiba Satellite L305-S5875; Recovery Error 10-fc12-045d HELP!!


no it is not fried. you just need to find a vista disk and use that instead of the recovery disks. Once you reinstall Vista you should be able to go online for the Toshiba drivers. Make sure you have the windows Vista Key which should be located under the laptop. the vista software install will ask for it.

Jan 10, 2010 | Compaq Deskpro EP PIII-650MHz/ 128MB/...

1 Answer

First let me say this is MY FAULT! I have a Logitech mouse, which I wanted to use with my new laptop. So I tried to install the software, and deleted the installed mouse/pointer. THEN I learned that...


I would suggest that you borrow a generic mouse from someone and plug it in the vista and then do that. Another option is to boot your computer in safe mode and then uninstall the drivers there as the mouse will work with generic drivers in safe mode.

Oct 28, 2008 | Gateway PC Desktops

1 Answer

My laptop toshiba satellite, windows vista, does not play cd or dvd.


download toshiba dvd driver from toshiba.com or just search the web for toshiba dvd driver. install it it should work.

Oct 10, 2008 | PC Desktops

2 Answers

My HP deskjet 3420 will not with a Toshiba Satellite laptop.


You will have to install/update the printer driver for the Toshiba to print.

Sep 03, 2008 | HP PC Desktops

1 Answer

I have a new Toshiba Satellite A210 with Vista Home edition installed . I downloaded and installed Windows Vista OS patches to bring machine up to date. Now when I boot the machine, the windows shows the...


hi philipQ

Did your laptop come with restore CDs?, if it did, then i suggest you to a complete system restore. and see if the problem is solved.

i am always here
Thanks
RAhUL

Jun 18, 2008 | Toshiba PC Desktops

2 Answers

Error 10E716045D


When I first trying system recovery the recovery would complete and when rebooting it hang at mup.sys in the drivers, now I get this error 10E716045D.
Toshiba A105-2716

Apr 18, 2008 | Toshiba PC Desktops

1 Answer

I'm trying to connect my toshiba satellite m115 to my insignia 19" lcd hdtv but its saying on the tv " mode not support " how do i fix that so i can watch my laptop on my tv?


Your toshiba m115, like my m105, is probably set at settings 1280X800. Once the LCD is hooked up to your laptop
  1. Right mouse click on empty spot on desktop
  2. left click on properties
  3. left click on settings tab
  4. left click on advanced
  5. left click on INTEL MEDIA GRAPHICS tab at top
  6. left click on graphics properties
  7. display settings
  8. change to 1024X768 or 800X600 (whatever lcd tv supports)
  9. click apply
  10. click on display devices
  11. make selection
  12. apply

Apr 02, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

1,542 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...