Question about Sony KV-36XBR400 36" TV

3 Answers

This TV worked very will until the past two weeks when it refused to start up

There apparently a lot of disgruntaled folks out there who are having problems with their Sony TVs. Check ----   www://Pechorin's .com/m/204/12/31/Sony_Trini...
Any solutions available for TV that all of a sudden goes black?

Posted by on

  • Anonymous Aug 17, 2008

    no sound and no picture


3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My solution, do not buy another Sony. My $3000.00 XBR that has already had a $300.00 repair is dead again. I am no longer the poster boy for Sony. They have gotten lots of my $$$$$$$ over the years but no more. This ****** is moveing on.

Posted on May 12, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 3,130 Answers

Larcin, that link is a dead one.

Posted on Mar 09, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert that has over 500 points.

  • Expert
  • 247 Answers

Any sound? If so, it could be a bad display or high-voltage or associated problem.

No sound and no picture could be a bad line cord, power switch, blown fuse or AC problem.

In this case, make sure it is plugged into the ac outlet and the ac outlet is getting power by plugging in a lamp that is known to work into the outlet. If it does not light, then ther is no ac power at the outlet and you have a bad fuse or tripped circuit breaker (most likely) or (less likely) a faulty outlet or break in the house wiring.

Good luck! :)

Posted on Mar 09, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Have a sony kv-32hs510 and about a week or 2 ago it started not turning on and giving me 6 blinking lights on the standby light now from time to time it will turn on and works perfictly untell its turned...

In sony television there is some self-diagnosis functions. That is indicated by blinking of led. in your TV there is six blinks that means it have some problem in the horizontal section. From your narration it might be because of some dry soldering in the horizontal side that's why it works perfectly intermittently. First of all check for dry soldering in horizintal section near LOT( line output transformer) . surly its a dry soldering. Only thing is while doing the soldering be very careful. there is possibility of two adjacent pins get shorted. After soldering carefully watch for any shot circuit only after that switch on the tv. I have the service manual for the same if you need it for reference will sent the same to you. Only thing is need you email id for the same Because its a pdf file and have a size more than 150kb. Through fixya i can sent only files bellow 150kb. if you need any further assistance feel free to contact me through fixya

Jun 08, 2011 | Sony FD Trinitron WEGA KV-32HS510 32" TV

1 Answer

Stand by time is flashing tv will not start

no the tv has no battery for memory.the memory is supplied by the 5 volt standby.the tv must be plugged in to maintain the 5 volts to keep its memory.

Jul 18, 2009 | Sony FD Trinitron WEGA KV-34HS420 34" TV

1 Answer

I have a jvc tv bu the picture has gone but the sound is perfect. I was talking to sombody who said to look in the back and if you can see no red light the tv is fecked and your better off getting a new...

I've been fixing consumer electronics for years. If you know what you are doing it's usually extremely cheap to fix.. ie: bad solder joint, blown horizontal oscillator transistor, bad capacitor etc... Parts are cheap.. it's the labor that kills folks which is why I do all my own work.. but then again I have a Electrical Engineering degree. You need to decide how much you would be willing to spend on this TV. Most folks throw them away (unfortunetly) because a typical shop will charge $200 plus to fix these types of issues. So either you learn how to fix this yourself.. lots of help on the internet or pay someone else or donate / recycle it. Or find someone like me that fixes stuff for their friends and family for the price of the parts.

Apr 15, 2009 | JVC AV-32D305 32" TV

2 Answers

Possible to connect rabbit ears with prongs to Toshiba 27A43C ?

yes, it can be done, make a quick trip to radio shack to get the adapter you need.

please take the time to rate this solution.

Jan 29, 2009 | Sony KV-20M42 20" TV

1 Answer

Screen flashing on start up

plz contect me we repair lcd plasma and projection tvs

Dec 07, 2008 | Sony FD Trinitron WEGA KV-32FS100 32" TV

1 Answer

Philips HDTV does not turn on

look for imperfect contacts on the inside main board.

Jan 21, 2008 | JVC AV-27230 27" TV

1 Answer

Delay to see the picture

Your power supply is going south, I have an old sony with the same problem. The voltage level drops and does not have enough 'kick' to start. It will work better when it is warm. The module will need to be replaced.

Nov 29, 2007 | Sony KV-27XBR45 27" TV

1 Answer

Fd trinitron kv-27fs320

I think you may have a cold solder joint or burned loose connection somewhere in your power supply. Also maybe a crack in the circuit board. apparently when you moved the tv you "fixed" the problem temporarily. Stargazer

Jan 23, 2007 | Sony FD Trinitron WEGA KV-27FS320 27" TV

1 Answer

Sony 36" tube TV

It definitely does not seem to be a problem with the Picture Tube. More like a cold solder. It is definitley not a job for a layman. Also, get a good technician to have a look, as locating cold solders is a labourous and time consuming process. It could also be possible that the main DC filter capacitor is getting dry, and may require replacement.

Aug 15, 2006 | Sony KV-27S20 27" TV

Not finding what you are looking for?
Sony KV-36XBR400 36" TV Logo

Related Topics:

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts


Level 3 Expert

98829 Answers

The Knight
The Knight

Level 3 Expert

69808 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides