Dear Technician, Kindly help me how to enter Honda accord 2000 model car radio code to make it functional again. My car radio is showing " Code Error" and not asking me " Enter code" ? My e mail address is " syed_shaheen07yahoo.com ". Thanks and regards.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
When you disconnect your battery and then reconnect it again, it disables the radio. This is an anti-theft protection for your car radio. The enable your radio the activation code is in your vehicle owner's manual. If you do not have this code you need to go to your Ford service centre and get them to enter this code for you.
The anti-theft feature was engaged. This is usually caused by the battery being disconnected. Do one of the following: 1. Check your owners manual for the User Card showing the code. 2. Call Hyundai National Consumer Affairs at (714) 965-3006. When you call, you may need the VIN number or the radio chassis identification number (That might be the radio's serial number). They will tell you how to retrieve the information needed.
If the wrong lock-out code is entered, the Anti-Theft system will
activate and the radio will become inoperable. To correct this, press
and hold the "BAND" button for at least 3 seconds until the incorrect
number on the radio disappears and "CODE" is displayed again.
If I understand your post right, you have the code but need the procedure on how to input/enter it into the radio. To my understanding, a 1995 Volkswagen Passat would have a non-BOSE unit with or without CD changer controls. It was a premium sound system with anti-theft coding.
Pls try: 1. Power the radio ON till "SAFE" is displayed; 2. Press the AM/FM and SCAN buttons simultaneously till display shows "1000". (In some versions, it is the seek and the two scan buttons); 3. Release the AM/FM and SCAN buttons; 4. Enter your security code using the first four station buttons on the radio; 5. The first button changes the first number of the four digit code; 6. The second button changes the second number and so on and so forth; 7. Once the proper code has been entered press the AM/FM and SCAN buttons at the same time and hold until the radio accepts the code; 8. You have two tries before the system will lock you out for an hour; 9. Should you happen to have a three digit code, pls make the first digit a zero; 10. The first digit can only be 1 or 0 (the 0 will not show up so for a zero, push the button until the 1 disappears).
Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.
Hi there, there is no easy fix for this. First, check in the owners manual for the car. It is often written down in there. If not...you will need to go to a Honda dealership with the VIN of your Accord and they can look up a database and give you the code. They may charge you for this, but it will be a minimum charge only, and certainly cheaper than a new radio. Good luck
This is the workshop procedure for resetting the code.
KENWOOD SECURITY CODE CLEAR procedure
Your radio will require one of the following procedures.
Type 1 During the code request mode, while holding the DISP key depressed, press and hold the Volume UP or DOWN key for 3 seconds (so that “…” disappears). Then using your remote enter your code.
Type 2 Press the "Auto" button and "Track up" on face of radio at the same time. The four dash lines ( . . . . ) should "disappear".
Then using your remote enter your code.
Type 3 Model# DPX-4020 and DPX-4030 Press and hold the 1 then the 6 preset key (preset keys are the buttons on face of radio for storing you "favorite" radio stations). "C" should display. Then using your remote, enter your code.
Enter your number from the remote control unit. Your code number is 5227 (KCAR)
* Press numeric key “5” ( 2 times ) and press the Track UP/Next Track key * Press numeric key “2” ( 3 times ) and press the Track UP/Next Track key * Press numeric key “2” ( 1 time ) and press the Track UP/Next Track key * Press numeric key “7” ( 2 times ) and press the Track UP/Next Track key
The security is canceled and the set enters the TUNER mode! Please rate me FixYa for this solution. Good Luck :)