Question about Mag Innovision lt456s 14" Flat Panel LCD Monitor

1 Answer

Does the MAG LT-456s require drivers

I have the monitor and plugged it into a desktop and nothing happened except the green light on the power button. The screen remained black. Is this a plug and play or does it need drivers loaded to operate?

Posted by on

  • Tiburcio Apr 05, 2008

    Basically I have the same problem than the Above mentioned, it is just black with the Power Green Led on.

    I would like to know if I need some special driver or if is not compatible with my Desktop (Windows XP).

    Thanks in advance for your help.

×

1 Answer

Perhaps your screen resolution is set too high. Try using a different display to set your resolution to 800x600, then attach the MAG display. Adjust from there once it is working...

Posted on May 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After a storm the other night my Proview PL866s amber light is blinking - however when I press the amber button (which usually turns green and then it works) nothing is happening except blank screen and...


If this happened after a storm, the monitor may have been subjected to a power surge, which unfortunately might have killed it.

If you have another monitor (or a friend who has one) try plugging that other monitor into your computer. If the second monitor works, yours will need to be replaced as the input was probably destroyed by the power surge.

If the second monitor also doesn't work, there may be a problem with your computer, most likely with the power supply (this is the part most often damaged by a power surge). You may want to have it examined by a professional computer repair person at that point.

Hope this is helpful!

May 16, 2011 | Proview PL866B 18 in. Flat Panel LCD...

1 Answer

Monitor not showing picture, but has power


Could be the Graphics card is out, or the VGA cord is damaged and isnt giving video but is giving some sort of signal to engage the monitor.

Apr 14, 2010 | Mag Innovision InnoVision LT 501 15 in....

1 Answer

I have a MAG INNOVISION LT765s LCD monitor. When the computer boots up, the power button on the monitor won't stay on so the display won't come on. It sometimes takes an hour of fooling around with the...


I have had similar problems with my Mag LCD monitor. I recently dicovered that the problem was with the adapter and not the monitor. Try replacing the power adapter.

Sep 21, 2009 | Mag Innovision InnoVision LT765 17" Flat...

2 Answers

A Simple Power Adaptor Issue


see are u sure that cable is for that slot...
try to open it as slider or use some lever to open it

May 17, 2009 | Mag Innovision lt456s 14" Flat Panel LCD...

1 Answer

Emachine destop not recognising acer lcd monitor


It sounds more like the computer isn't starting up. The "no signal" message is coming from the monitor itself to tell you it's on but there's nothing coming in to display. Normally no special drivers are required for the monitor, and you'd see at least the computer maker's splash screen and BIOS messages if the computer was starting up properly.

You'll need to determine what is keeping the computer from starting up. Make sure it's getting AC power and that the power light comes on when you press the front panel power button. You may need a power supply. If the computer comes on but doesn't boot you may have memory problems or trouble with the motherboard. But your monitor is working properly.

May 10, 2009 | Microtek C593 15" Flat Panel LCD Monitor

1 Answer

Mag lt982s no green light no power at all


try testing it in another outlet a known good outlet if it powers on then your outlets bad if it doesnt means a bad cord or bad monitor

Feb 10, 2009 | Mag Innovision LT982s 19" Flat Panel LCD...

3 Answers

Need a driver and users manual for mag innovisionLT576s


42905439-177x150-0-0_.jpg ViewSonic (HASU05F) Information: Product details Price Range: $25.00 - $40.00 at 3 stores This AC Adapter is ideal for use with your Flat Panel Monitor or LCD Display. The High performance AC Power Adapter pictured here provides consistent and continuous power at the specified Voltage and more

this is what else u need to power the monitor it is plug and play compatible


make sure your video card has the right software to run monitor

Where can I get drivers for my video cards?
Answer ATI – http://www.atitech.com/
Nvidia - http://www.nvidia.com/
Matrox – http://www.matrox.com/
Pinnacle – http://www.tridentmicro.com/
Trident - http://www.tridentmicro.com/
Diamond Multimedia – http://www.diamondmm.com/
Cirrus Logic - http://www.cirrus.com/en/


http://www.opendrivers.com/driver/214283/mag-lcd-monitor-drivers-windows-95-98-2000-xp-me-nt-free-download.html

heres the driver that you needed for your monitor

I can’t find where the AC power cord plugs in on the back of the monitor. Answer There are two places where the AC connector could be found.
1. Look at the back of the monitor right next to the signal cable connection.
2. If the signal cable does not detach from the monitor, follow the signal cable to the end, and you will see the 15 pin D-Sub connector (blue connector). There you will find a small hole with a pin inside (in between the two notches).

May 26, 2008 | Mag Innovision LT576s 15" Flat Panel LCD...

1 Answer

Lt 456 s


u will get it on download.com
yeah it is driver problem nothing more
it happened to me too.

Dec 18, 2007 | Mag Innovision lt456s 14" Flat Panel LCD...

Not finding what you are looking for?
Mag Innovision lt456s 14" Flat Panel LCD Monitor Logo

282 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mag Innovision Computer Monitors Experts

William Miller
William Miller

Level 3 Expert

8820 Answers

Tony

Level 3 Expert

2598 Answers

Are you a Mag Innovision Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...