Question about Kitchen Ranges

1 Answer

Parts for George Foreman Grill GR20BW

Need new bun cover for GR20BW George Foreman Grill

Posted by on

  • bunny5344 Jun 16, 2008

    Need a new bun cover

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 778 Answers

Hello Rod01,
After some research, I found no parts resource for your GR20BW bun cover (I'm not saying that such a resource doesn't exsist though). So other than replacing the grill or repairing (if it's broken) your existing cover, that buying a used one at an online auction site (or wherever you can find one) for parts (if the cover is intact on the parts grill) would be a place to start looking. I tried and didn't find anything for your GR20BW, but did find a few GR10BW grills.
I hope this helps, and Good luck.

Posted on Mar 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The inner grill element does not heat up. I Need to replace it,how do I remove the existing element.


Grill element is normally replaced through the grill. Remove trays. Make sure power is off at the switchboard. Undo the screws holding the grill mounting plate in place and simply pull it out and remove wiring. Take note of where wires go. If the wiring is very short you may have to remove the rear cover of the range to access the wiring terminals.

Feb 06, 2011 | Kitchen Ranges

1 Answer

Does anyone make a cover to fit over the Grill exhaust vent. I get a lot of cold air coming up thru it and a cover would be nice.


Yes, we have the grill covers for your Jenn-Air range. Just contact us at:

http://www.fixya.com/repair/d499389-accurate_appliance_repair_service from 7 AM until 7 PM CST Monday through Saturday and we will get this out to you asap.
We look forward to working with you.
Thanks, Ella

Dec 11, 2009 | Jenn-Air JGR8850 Gas Kitchen Range

1 Answer

Can grill be safely converted to griddle on Thermador PRG486GLUS?


http://www.instawares.com/add-griddle-top-2.133-1002.0.7.htm

try this.

If it doesnt fit your specs. then i would suggest u find a thermador parts place and begin to buy the parts for the griddle as replacement parts. find a model of the stove set up that you want and make a list of all the parts that go to the griddle attachment.

My guess is that the reason for the flat "No" on the retrofit was that griddles require a thermostat similar to the one on the oven and broilers do not. So if their is no room behind the face plate where the knob would go then you can't put in a griddle. The other issue might be that the burners for the griddle wont line up with the brackets that are holding up all the broiler burners now. The griddle burner looks exactly like the one from the over only smaller so it has to line up strait where a regular front and back burner have to line up offset. maybe since you have the broiler already that should not be an issue? Then the problem is finding the griddle top it self that is going to be spendy. I think the link i gave at the top is your best bet. good luck.
Leslie

Mar 19, 2009 | Thermador PRG484GGUS Gas Kitchen Range

1 Answer

Require new oven grill knob and flame safety device to be instaleed on a Model G716 WH


go to sears.com,click on parts,put in your model number and see if they have the part you need-mike

Nov 10, 2008 | Kitchen Ranges

1 Answer

St george range hood slide out is broken need new part


for new parts just click this link
www.repairclinic.com

select the device in this link and then enter proper model number and then enter the required part.it will show up on the screen.you can also order this part.and they will send you.

thanks.

Oct 13, 2008 | Kitchen Ranges

1 Answer

I NEED TO PURCHASE THE UPPER GRILL ELEMENT FOR A EUROLEC 6566 STOVE


hunter3095,
Welcome to fixya.
I'm Huuum and happy to assist you,

You said, you NEED TO PURCHASE THE UPPER GRILL ELEMENT FOR A EUROLEC 6566 STOVE!

Below is the site of one of our sponsors where you can get parts !

Best of luck. Huuum
"Please remember to leave a rating before you go!"

http://www.appliancepartspros.com/partsearch/

Sep 25, 2008 | Kitchen Ranges

1 Answer

How do I get parts for a Viking range top. I need two (2) drip trays for the drawer beneath the grill. Thanks...Helen R. Ippel


Hi


Thanks for using FixYa. Youcan order the drip trays for the drawer beneath the grill from the link---

VikingKitchen Range Parts

Please do rate the solution andrevert for further assistance.


Thanks

Rylee

Apr 10, 2008 | Viking Kitchen Ranges

1 Answer

My george foreman grill doesnt switch on when i turn on the plug, can you please help me?


Hi there,

Make sure you have power to the wall socket. Try the Grill in a socket you know that works. If it still doesn't light up and work chances are the cord or power lead could have a break in it and may need either replacing or shortening if you can find the break. If the Grill works in another wall socket then the wall socket you were using it in will need to be checked and maybe need replacing. Hope this helps.

Regards
Bryan

Feb 23, 2008 | Kitchen Ranges

2 Answers

Rangemaster Toledo 110 oven/Grill element


Hi,

How easy is it to fit a new grill element. The element on the left hand side of the grill is not working so I need to replace this. I'm just wondering if this is easy to do myself or do I need an
electrician
?
Regards
Sandra

Dec 15, 2007 | Kitchen Ranges

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

399 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

yadayada
yadayada

Level 3 Expert

64286 Answers

paulcarew

Level 3 Expert

2059 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...