Question about Audio Players & Recorders

1 Answer

Unit Won't turn on.Checked Both Power Leads And Ground.I Have Power Behind Faceplate.Model#HD5112.Nothing Is Working.Thanks.If You Need To Contact Me Cell#630 244 9852.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 31 Answers

I think you are saying you verified 12vdc at the back of the unit and tested for a good ground, If you have your all time 12v and you switched 12v and ground then you have a power supply or shorted amp chip in the unit,Would need to be taken to a shop for service or sent to factory for repair

Posted on Mar 08, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenwood 6.1 dvd screen won't turn on, but reset


It appears that you may have battery power but, no accessory power. Check you radio fuse in the vehicle and, behind the radio.

Feb 06, 2013 | Car Audio & Video

1 Answer

Intertherm Air Conditioner S3BA-042KA compressor and fan not working (has power)


It sounds like that unit is connected to a "power saving load controller" device from the power company. The power company can turn your unit on & off with a radio signal. If you manually activated contactor and unit ran. I would bet that the power company's device or the wiring connecting it is where the problem lies. Call the power company and have them check their device. If they tell you that the device has been tested remotely and is working fine. Explain to them that you can activate your unit manually and it works fine. They should not charge you to come out. Those "load controller devices" have a pretty good longevity record.

Jul 11, 2012 | Intertherm Heating & Cooling

2 Answers

My xbox wont turn on


Hi,


Your console should turn on when the eject button is pressed. Press the eject button on the front of your console.
If the console turns on when you press the eject button but not when you press the power button, the console faceplate might not be attached properly. To make sure that the faceplate is attached correctly, you should remove it and reattach it.
  • Position your console horizontally, as you would position a DVD player.
  • Unplug the power cord and any other cables connected to the back of your console.
  • While holding your console firmly, curl your fingers inside the oval USB door on the front of the console.
  • Push the faceplate away from the console with your thumb until the faceplate comes off.

Note You will need to use some force to remove the faceplate.
Once the faceplate is removed, look at the tabs on the back. If any of the tabs shown in red in the illustration below are broken, order a replacement faceplate by contacting Xbox Support.
If none of the tabs are broken, re-attach your faceplate by pressing it firmly until it clicks into place.Try to turn on your console again. If removing and reattaching the faceplate did not solve the problem contact the xbox support.


Thank you!

Jul 31, 2010 | Microsoft Xbox 360 Console

2 Answers

JVC KD-R610 is stuck in Protect mode


Try disconnecting your battery, reconnecting it, and resetting your stereo. If that doesn't work, the constant power (yellow wire) or ignition wire (red wire) may have come in contact with ground or isn't properly connected. Make sure everything is connected properly and try resetting your stereo. If it is still flashing "protect", the unit needs servicing Contact JVC Customer Care Center at: 800-252-5722.

Jul 22, 2010 | JVC AM FM CD DET FACE CAR STEREO

2 Answers

Jensen VM9410 - Stopped Operating All Of A Sudden


Sound like to me you got a problem with the capcitor inside the unit, if its under warrenty it will need to be serviced. If its not I ould be checking capcitors inside to make sure there not bulging leaking or otherwisen ot wroking correctly.

Jun 24, 2009 | Jensen VM9410 Car DVD Player

2 Answers

OEL Display not Working on my Pioneer DEH-P7800MP


Do you take the faceplate off often? If so mayeb you could try wiping the metal contact plate on the unit b4 u put on the faceplate.

Jun 02, 2008 | Pioneer DEH-P7800MP

1 Answer

Nothing displays on the control panel, microwave won't turn on.


We repair these control panel assemblies for customers nationwide with our guaranteed $39.95 service.

If you or someone you know wants to look into this, we have *critical* safety, disassembly, and troubleshooting info at our site, and our link is at our listing here on FixYa: http://tinyurl.com/yzjozk

NOTE: There should also be a "mini-manual" hidden inside the unit behind the control panel or hidden on the left side behind the grille, which is very helpful when troubleshooting.

You can usually find helpful exploded view diagrams and order parts by entering your full model number here: http://tinyurl.com/gv383

We're happy to help and we appreciate your thoughtful rating of our answer.

William E. Miller, AS-EET
prototech@usa.net
http://www.microwavedisplay.com

May 19, 2008 | Microwave Ovens

2 Answers

Kenwood kdc-322 faceplate problem?


I found my Kenwood KDC322 faceplate doing the same thing(cutting out) I cleaned the contact points on this 'ribbon' behind the faceplate by rubbing the discoloration off with a pencil eraser. The lights have not cut out again.

Apr 04, 2007 | Kenwood KDC-322 CD Player

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

kakima

Level 3 Expert

102366 Answers

 Grubhead
Grubhead

Level 3 Expert

4943 Answers

The Knight
The Knight

Level 3 Expert

73086 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...