Question about Zebra Stripe S600 Thermal Label Printer

1 Answer

Calibration I am trying to make cheat sheets on Manual Calibration on the Zebra S600 printer. Can anyone direct me to a website or provide any info on this?

Posted by on

  • computerjune Mar 31, 2008

    Thank you for your feedback. I have not had a chance to try, but sounds like this will work fine. Thanks!!

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

If the media sensor is positioned correctly and the printer is set for an autocalibration on power up and printhead close a manual calibration is not really needed. However, here is the information that is the easiest way to run a manual calibration.

Manual Calibration

With the printer at a ready state, press the MODE button two times or until the CALIBRATE light comes on.

Press the FEED button.

Once this is complete press the MODE button four (4) times to save these settings.

Posted on Mar 30, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I shut off the auto calibration on start-up? Every morning 1 am wasting 4 labels and ribbon for calibration.


Can only be done by sending a ZPL command. The ZPL manual can be downloaded from the Zebra web site.

Apr 28, 2011 | Zebra Stripe S600 Thermal Label Printer

1 Answer

Stripe S600 Thermal Label Printer: how to load zebra stripe printer labels...


CLICK HERE to download the full user manual from Zebra. If the link doesn't work, go to Zebra.com, click Resource Library at the top of the screen, then click MANUAL. Choose your model number then follow the prompts.

May 18, 2010 | Zebra Stripe S600 Thermal Label Printer

1 Answer

I am having problems with our Zebra Stripe S600 if I ask it to print 500 labels it will only print 3 then I have to line the label and ribbon back up, any advise would be gratefull


Recalibrate the printer, it seems it might have lost it's calibration. Chekc and clean all sensors in the paperpath with Isopropyl Alcohol.

Jan 21, 2010 | Zebra Stripe S600 Thermal Label Printer

1 Answer

Zebra S4M (S4M00)models keeps losing config


Your solution provided absolutely no help. All I needed was a manual for the printer so I could order a part. Sending me to a site so I could order supplies for the printer is not my idea of providing a quality solutions nor is offering me a "Premium Assistance Plan" of any value either. I would suggest that if you are not going to try and resolve the issue on the first go around that you simply tell the person you can't help them.

Jan 11, 2010 | Zebra Stripe S600 Thermal Label Printer

1 Answer

Hex Dump


Turn printer off. PRESS & HOLD PAUSE & FEED buttons after power goes out. While holding turn printer ON, count to 3 & let go. once printer does its checks press the MODE button 4 times to SAVE. the bottom 3 lights will flash 1 time. This should reset the entire printer including calibration, communications & everything to be like it just came out of the box.

May 27, 2009 | Zebra Stripe S600 Thermal Label Printer

1 Answer

Not printing


this problem will address on label and ribbon issue. you must establish your printer set-up first, meaning see to it that the label and ribbon was correctly loaded, if still problem occur try using manual calibration you can see how to do at the manuals you have..

Jul 29, 2008 | Zebra Stripe S600 Thermal Label Printer

3 Answers

Zebra LP 2844 label printer


I'm having the same problem and got the same result when trying the manual calibration on the 1st page...

Jul 14, 2008 | Zebra LP 2844 Thermal Printer

2 Answers

Zebra S600 printer continues calibrating


The factory default settings for the S600 is to auto calibrate every time the printhead is closed and every time the power is cycled. If the media sensor is not positioned correctly for the media you are using the label size will not be detected during a calibration. You mentioned the media has no markings, doe sthe media have a space between the labels? If so, the media sensor may not see the gap in the labels adn therefor is not calibrating properly or not calibrating at all. Check the media sensor position. I have found that the media sensor must be at least 1" from the inner wall of the printer so it doesn't see the edge of the backing in oder to read the size of the labels.

Jan 28, 2008 | Zebra Stripe S600 Thermal Label Printer

Not finding what you are looking for?
Zebra Stripe S600 Thermal Label Printer Logo

Related Topics:

1,174 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zebra Office Equipment & Supplies Experts

Dave Busselle

Level 1 Expert

54 Answers

yadayada
yadayada

Level 3 Expert

80407 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Zebra Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...