Question about Dishwashers

2 Answers

Hi I've got a fully integrated inglis dishwasher ...but the wooden front door has just fallen off!!! It has 4 clips attached to the door, and 4 holes on the dishwasher... but the gaps don't fit the clips... Help?! thanks

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How do I get the integrated door of to change the handle

Posted on Jul 09, 2013

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,665 Answers

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi, this is an integrated dishwasher and with the kitchen door attached won't open fully.


Maria, adding the door to the front of machine has increased over all thickness to what was existing, washer was not designed for the extra thickness and will catch on lower part of washer.
You may have a few choices, shorten added door panel, taper bottom of panel to allow operation, or remove added panel.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

May 04, 2016 | Dishwashers

1 Answer

New AEG dishwasher wont fit in existing space that housed our old Favorit 44050 VI


The space underneath the dishwasher, or cabinets, is referred to as the kick space. It is where your toes fit under the edge of a counter and they are typical of cabinets and dishwashers alike. You should not expect a wood trim piece to fit underneath the dishwasher and not all dishwashers will accommodate one. It is fair to say that all dishwashers will come complete with a trim piece to cover this area, since some have venting and others do not; some have a door that extends down further and some do not. Generally speaking the variation people concern themselves with is in dishwasher's width and not in the door configuration. So having said and in consideration of your (assumed) desire to retain the wood trim, I suggest you retool the wood trim piece to work/fit with the dishwasher you decide you want. This is what I did rather than use the provided black metal panel. I have attached photos.
d8c6be34-1c2a-482c-8f06-f609e72b619c.jpg 9cc1da12-62a1-4b9c-9bc2-5a2b06e4845b.jpg

Mar 11, 2014 | AEG 24 in. Favorit 44050 Built-in...

1 Answer

I've just installed a Miele 5500SCU Dishwasher and the springs that support the door cant be adjusted far enough to take the weight of the door, does anyone have any suggestions?


If the dishwasher is brand new, then there is an issue with the configuration of the springs, i.e not mounted correctly. A factory dishwasher door should not need to be adjusted. However if it is older, it is possible that the springs came off, in which case they can be seen from the underside of the dishwasher and by a panel that unscrews on the bottom of the door. Make sure the springs are there.

Dec 30, 2012 | Miele Dishwashers

1 Answer

Ikea Whirlpool integrated dishwasher door front


how do i take door off to fix handle back on dishwasher

Jan 03, 2010 | AEG 23 in. Favorit 50750Vi Built-in...

1 Answer

Dishwasher cupboard front


typically there is a metal trim around the wooden front. on the sides of the dishwasher door you will see some small screws. remove those screws and the wooden panel can be easily removed.

Feb 14, 2009 | Dishwashers

2 Answers

Neff dishwasher removal


this may work - if it is an integrated dishwasher you should have a star shaped screw attaching the door to the machine on either side (about half way down). try pulling the machine out - and then looking for the holes on either side at the front. insert a star screw driver (may not work with other screwdrivers) and release the bolts (screws) then slide the door upwards.


Jan 17, 2009 | Neff 24 in. S5456 Built-in Dishwasher

3 Answers

Bosch SGVV53E03GB/55 cannot get panel door off


I have an SGV53E23 so don't know if this will help. My door is screwed but also held in place by 2 double sided sticky pads about half way down. They stick like the proverbial so try easing the door off one side at a time and look down to see if you can see any sticky pads. If so firm but gentle easing will get the baby off.

Jun 20, 2008 | Bosch 24 in. SGV53E03 Built-In Dishwasher

1 Answer

Smeg Dishwasher - model unknown


model numbers for dishwashers are generally where you can get to from the front, if they are noit on the front panel then look inside the door rim where the rubber seal is, either a small sticker on the door rim itself (inside) or where the door fits on the main cabinet, open the door fully to look for this sticker, sometimes placed under the front of the lid

Sep 28, 2007 | Smeg CSU2001 Built-in Dishwasher

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

353 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Electrolux
Electrolux

Level 3 Expert

4342 Answers

Are you a Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...