Epson Stylus NX400 InkJet Printer Logo
Posted on Mar 10, 2010
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Epson TX100 won't recognise new cartridges

My black 73N cartridge ran out and so i recently bought the 91N or economy one to replace it. However, the printer won't recognise the cartridge and so i am unable to print anything. I then went back to the store to find out what's wrong and the salesman suggested that the chip might be faulty so he suggested i buy another one. I proceeded to buy the 73N cartridge just in case (as those were the ones i had in my printer originally), as well as the cyan cartridge as it too had run out. i have followed the installation guide including the computer one and still, my printer won't recognise the cartridges.I don't understand why this is so because i have replaced the cartridges numerous times and it has worked every time. If you have any solutions that will be greatly appreciated

1 Answer

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

Hot-Shot:

An expert who has answered 20 questions.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

  • Expert 72 Answers
  • Posted on Mar 22, 2010
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

Hot-Shot:

An expert who has answered 20 questions.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Oct 09, 2009
Answers
72
Questions
1
Helped
15464
Points
192

Did you removed the tape that cover the contact of cartridge? if done then try to clean the cartridge surface circuit contact of your printer and cartridge and be sure to off your printer.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2helpful
1answer

Epsom TX550W Doesn't recognise replacement cartridges

Are they official cartridges? If not, are they direct replacements for the Epson versions of the cartridges: Epson T0732/T0732N/73N Epson T0733/T0733N/73N Epson T0734/T0734N/73N
If they are, have they been refilled or bought fresh? If they have been refilled, have they been re-programmed? Have you updated your printer firmware recently?
1helpful
1answer

My TX550W ran out of Black Ink (T103) and I replaced it with a Genuine Epson Cartridge compatible with my printer (73N), My computer status monitor/ink check on the printer shows the black ink is now full...

Sometimes the ink does take a while to come from the cartridge to the print head. Performing 1 head cleaning procedure may fix this. But only do this once, anything after is just wasting ink. Also make sure no part of the air tab sticker has blocked the air hole in the cartridge. Have a look at the new one you have to find the hole. Its just under the sticker you take off before installing it into the printer.
I hope this helps Regards GM
2helpful
2answers

I have replaced black ink cartridge 73N message on screen says Error i press ok to proceed message goes back saying replace ink cartridge?

The main problem in using the latest Epson printers, is the ink replacements. Ink cartridges like 73N has its own ink reseter (the little chip in front of the cartridge). Once you replaced the ink without using the right procedures, for example you have a 10% remaining ink level on one of the cartridge, and you replaced it without using the setup menu and selecting the replace ink cartridge, even though the cartridge is new, the printer will read the replaced cartridge as a 10% ink level cartridge. When the remaining 10%, drops to 0%, your cartridge will read as an empty cartridge. The chip on the cartridge is registered as an empty cartridge.
-try to replace the ink reseter or try to clean the cartridge chip then put back the ink.
0helpful
1answer

I have an Epsom TX100, it has run out of black ink. I have replaced it with a 91N cartridge, but it is saying it is not compatible.

Hi leona_sha321,

TX100 doesn't use 91N ink cartridges that was why it is saying that it is not compatible. below are the list of inks for your TX100

T0731 73N - black
T0732 73N - cyan
T0733 73N - magenta
T0734 73N - yellow

Thank you. hope this helps
Janc30
22helpful
3answers

Epson TX100 won't recognise ink cartridges.

Yes, Genuine Ink Cartridges.

Did you use Epson Genuine Cartridges?

ALL…. Epson & Brother Requires Genuine Epson Cartridges. !!!!!!!!
That sounds like your problem.

In Purchasing Epson's CX 5400, CX4600, & CX7400 and more, I found out that Epson does not like Generic Printer Cartridges. I also Purchased a Brother. That also does not like Generic Print Cartridges. Color that should be Yellow, will turn out Green, Blue Brown, etc.

These printers have a CHIP that will detect if it is Generic or Genuine. When they see it’s Generic Cartridges, it will print lines thru the words, stripes across the picture and also do a mix match with the colors. It also will not let you print anything, if only one of the cartridges is empty.

I wanted to print only Black, and would not let me, because I did not have any ink in one of my cyan cartridges. Go figure.

That's what these Companies do., so they can keep selling the ink cartridges. Some Printers, are able to use Generic, and some are refillable. Some you can refill them up yourself and I heard, quite MESSY.

So I learned, thru trial and error, that you must use the ORIGINAL Genuine Cartridges for these PRINTERS. Some people say some models work fine compatible, but not mine.......


I had to replace the printer, but Epson, Lexmark & Brothers are always on sale. My Brother & Epson cost me $50.00 with Rebate. .

This is the only advice I can give you. If you find this helpful, pls rate me.

Thanks and Good Luck :0)

0helpful
1answer

Replaced color ink cartridge with a new one, and still says to replace

what is your model. The 73N and 91N is having this prob in common. Just replace it with a new one. Epson replaces it for free. or call epon toll free no. they will come and replace with a working one.
0helpful
1answer

Epson Cartridge wont be recognised by printer

Check for the tape that wraps all the way around the cartridge bottom it usually has a red line on one end like a tab DONOT REMOVE THE ONE THAT LOOKS LIKE WIRES ON IT.... is it still there if so remove it.............MAKE SURE THE CARTRIDGE IS SEATED PROPERLY IT DOESNT TAKE ALOT OF STRENGTH TO INSTALL.....
0helpful
2answers

Black cartridge error

maybe the cartridge you buy is not same brand of your printer,, or try to remove printer driver using the ad and remove program, uninstall completely the driver and install gain
0helpful
2answers

Epson c90

did you remove protective strip from cartridge
Not finding what you are looking for?

605 views

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Cindy Wells

Level 3 Expert

6688 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

NH TECH

Level 1 Expert

17 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...