No matter how many times I turn down the volume on the radio or cd on my alarm clock. whenever the alarm goes off it is at full blast and I cannot get the alarm to set at a reasonable sound level.I took it back to the shop and swapped it but this one does the same. Model is cd micro clock radio CCR1CD
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I have owned several radio alarm clocks and I have found them all fairly intuitive to operate - no instructions needed, though sometimes it takes a short time of playing around to fill in the operating details.
The alarm buzzer is generated by the audio part of the radio and so those clock radios that do have a buzzer with adjustable volume it is controlled by the radio volume control. In this case it is usually the case that falling asleep to the radio with the volume turned down results in not being woken next morning because the alarm isn't loud enough.
Switching from radio alarm to buzzer is usually intuitive but in the absence of instructions there will be a limited number of switch combinations to play around with.
When you set the alarm, turn the volume button on the front counter-clockwise (volume down) until it clicks. Darth will then wake you with one of three extremely LOUD, over-modulated soundbites or the electronic "beep-beep-beep" alarm . You can select the different soundbites/alarm with the "SELE-AL" button on the back. The only problem is, you can't tell which one you've selected until the alarm goes off. Cheap design.
Hold CLOCK SET button down, press HOURS and MINUTES until you get the right time, release CLOCK SET button. This radio alarm unhelpful calls the ON/OFF button "STANDBY"! To turn it on, press the STANDBY button so the standby light is on!
The clock radio is mediocre, according to at least 15% of owners. First, the radio reception lacks
clarity and the sound is tinny. Second, there are many small
buttons and it's impossible to tell which is which in a dark
room. Third, because the volume and radio tuner are adjusted
by moving a dial, it is easy to accidentally move the device
and turn down the volume as a result. This can be a problem
if you've set the clock-radio alarm and the radio volume is
too low.Kindly check these first.
Had the same problem and returned it for a replacement. The new one doesn't go off at full volume, but instead switching bedside lights on/off cause it to turn on/off. Guess it's very susceptible to electrical interference. Going back again.