Question about Epson Stylus CX3200 All-In-One InkJet Printer
Hi iv recently installed the above epson all in one printer but the language is all in german, please could you tell me how to alter the language as I havent got a clue how to speak german. Any help very much appreciated.. From Sue
How do i scan on my epson stylus DX 7450 printer
Posted on Aug 28, 2010
Thank you very very much. people like you is what this world needs more.
Your solution works too for Spanish. :-)
Posted on Oct 14, 2008
I have done this so I know it works, make sure you have the driver CD you got with the printer before you start this.
Ready for this...........
Switch off and disconnect the printer. Go to Add/Remove Programs in Control Panel, and remove EPSON PRINTER SOFTWARE (this may be named in a foreign language like 'EPSON DRUCKER SOFTWARE' - when you are at this stage and have selected to 'change/remove' this item, a window will appear titled 'EPSON Printer Utility' - above the icons of each of your EPSON printers will be a 'Printer Model' tab and 'Utility' tab. Please click on one of the printers so it is highlighted, then select 'Utility' - please tick every box listed in the 'Utility' section and select 'OK'. Answer positively to all questions and once the uninstall is complete, you will need to follow the same procedure to remove the other EPSON printer drivers by clicking on 'EPSON PRINTER SOFTWARE' again and 'CHANGE/REMOVE'.
Open up Windows Explorer or My Computer, and navigate to the drive (usually C) where windows is installed. Browse to the folders called windows/inf on XP, or winnt/inf on 2000. If you can not locate the INF folder please go into the START MENU and select RUN. If there is any text within this box please remove and type C:\windows\inf and press enter. Please be advised that 'C' represents the hard drive on your PC. If your hard drive is a different letter please amend as necessary.
Find the files labelled OEMxx.inf, where xx is a number from 00, 01, 02 etc upwards. You will need to double click on each INF file in turn, and if it says "SEIKO EPSON" or "EPSON" within the first few lines, then you need to close the file, and then delete it. Repeat this until all EPSON INF files are removed.
Note: You cannot open a PNF file. If the corresponding .INF file is a SEIKO EPSON file with the Printer Details, then when removing that .INF also remove the corresponding numbered .PNF file.
Staying in Explorer or My Computer, stay within the windows folder (winnt folder on 2000) and navigate to system32/spool/drivers, and go into the folder named "w32x86". Delete any folders that begin with "epson", and then restart. Once rebooted, empty the recycle bin, and attempt reinstallation of printer, using the instructions below.
MAKE SURE YOUR PRINTER IS STILL SWITCHED OFF AND DISCONNECTED AT THIS POINT. Insert your driver CD. Double Left Click on My Computer and select your CD drive by right clicking on the CD icon and select open. When you first open/browse the CD-Rom then you should see various folders. Please browse to the Common Folder. Within here select the Printer Driver Folder then choose the WinXP_2k folder (it may be called WinVistaXP-2k or something similar). Run the Setup.exe file (the one with the picture of the monitor) and complete the installation as normal making sure you only connect the printer when requested to do so.
Once this has completed installing, please remove the CD from the CD drive and reboot the PC. The foreign language tabs will now appear in English.
Posted on Sep 19, 2008
Press the stop botton once when the printer head stops in the middle pross once then once again then once more the print head will move to the open point chenge ink and press the stop button once more ......hey presto
Posted on Jun 14, 2008
Reinstall making sure that you select your country when asked.
Posted on Jun 03, 2008
Tips for a great answer:
Aug 02, 2010 | Epson Stylus CX6000 All-In-One InkJet...
Jun 13, 2009 | Epson Stylus Multifunction Inkjet Printer/...
Mar 01, 2009 | Epson Stylus CX3200 All-In-One InkJet...
Sep 30, 2008 | Printers & Copiers
Sep 19, 2008 | Printers & Copiers
1,312 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: