Question about Whirlpool Duet GHW9150P Front Load Washer
My washer says that all contols are locked i can't use it at all please help
Door locked?? or control locked???? if control locked look to the far rigthset of buttons and the lowest one should say control lock(very small print) or a picture of a loc. hold it in for 305 secs and control lock will release
Posted on Mar 08, 2008
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Control locked stays on
The following link explains how to unlock the control panel on a Whirlpool Duet:
This is a designed safety feature of the washer that allows the consumer to lock the control panel to prevent small children from manipulating the controls. It can be inadvertently locked by leaning on the control panel, or during power outages. The instructions are printed on the front panel of the washer and are also included in the owner's manual.
If these steps do not provide you with a solution, you may have a more serious problem than a simple operator intervention. Please let me know if you require additional assistance. I hope this helps you.
Posted on Sep 11, 2009
SOURCE: control lock light stays on.
the button you need to push and hold is the cycle signal. it should be the bottom button on the far right side. push and hold until the light goes off, it most likely will take more than 3 seconds. The button your looking for should also have a small icon of a padlock .
Posted on Sep 07, 2008
Tips for a great answer:
Hello & Welcome to FixYa
This is a common issue with Whirlpool Duet washer however; your whirlpool duet washer needs a reset to resolve the control lock problem. Press and hold the END OF CYCLE/CYCLE SIGNAL button for 15 seconds to reset the control. Please get back to me if you have any other questions.
Sep 23, 2011 | Whirlpool GHW9400 Front Load Washer
You can unlock it by pressing the end of cycle signal button
and hold if for 15 seconds, this will reset the control. Hope this
helps...please post back for further assistance.
Aug 16, 2011 | Whirlpool Duet GHW9150P Front Load Washer
Oct 11, 2010 | Whirlpool Duet GHW9150P Front Load Washer
Jun 17, 2010 | Whirlpool Duet GHW9150P Front Load Washer
Mar 12, 2010 | Whirlpool Duet 3.8 cu. ft. Front Load...
Sep 11, 2009 | Whirlpool Duet GHW9150P Front Load Washer
Jun 26, 2009 | Whirlpool Duet GHW9150P Front Load Washer
May 13, 2009 | Whirlpool GHW9100L Front Load Washer
2,120 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: