Question about Maytag MAH2400A Front Load Washer

2 Answers

Fault F7 on whirlpool front loader

Problem with wirlpool AWM 6163 , keeps showing fault F7 , then stops
works for 2 min after 3 days, then back to F7 fault.

please help

Posted by on

  • helensmith May 26, 2008

    my hotpoint WD640G washer/dryer fused all my sockets in the house. I changed the fuse and switched machine back on. However after a few seconds the front display panel showed F7 and it fused again. The machine was in dryer mode at the time.. Please help if you can... Helen

  • grahamnco May 11, 2010

    How do you check the drain pump?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hello Whilpoopa awm 1011code f7 probleme

Posted on Jun 13, 2016

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 105 Answers

Check drain pump for blockage

Posted on Mar 15, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is error code F6 E5 in Whirlpool Dishwasher ADP 5510 IX ??? The dishwasher keeps stopping after 2-3 min of working.I haven't touched anything since the day I bought it (2 months ago)


Fault Code F5
Dishwasher Spray arms are clogged or otherwise malfunctioning
F6 Fault code
Dishwasher doesn't detect any incoming water despite the water inlet valve being open.

Nov 10, 2016 | Whirlpool Dishwashers

1 Answer

How do i clean a filter of a whirlpool awm 5080 front loader


If you are talking about the drain pump strainer, you need to remove the lower front panel. should be 3 screws on the bottom facing forward. Once you have that off, the pump strainer is almost in the center, facing you. unscrew it counterclockwise to remove.

Apr 26, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whirlpool AWM 5080 stops during cycles


Sound like could be faulty pump however you need to make sure no
Could be pump at fault 1st you need to make sure no coin stuck in there ...




Mar 31, 2010 | Whirlpool AWM6100 Front Load Washer

1 Answer

Front loader AWM 6100 - door open light flashes and won't wash


I think it may have try and get your local engineer out to have a quick look tell your thinking of buying new and what price can he supply 4. and you like a free estimate .

Feb 11, 2010 | Whirlpool AWM6100 Front Load Washer

2 Answers

Whirlpool awm 8125/3 fault code FH


Probably too late, but here it goes:
FH means some cicle is taking too long time.
Replace the inlet electrical valve. It probably wont open enough and the water flow is not enough to fill to level in time. This should cost you 10€ and is easily done by anyone.
Just remove the top of the machine (two bolts on the rear and slide to the back), disconnect the valve (electrical and water input and output), push the lockers and twist the valve free.

Feb 07, 2009 | Whirlpool AWM8123 Front Load Washer

1 Answer

Whirlpool washer awm 6163


ckd for drain hose to low ..top needs to be 30-38 ins from floor also needs to be loose fitting in drain pipe to prevent siphoning ..if neither is the case ckd fill hoses for obstruction in screens last ch flow meter ..remove top round object left side with small hose from fill valve 1 side other side to detergent dispenser may try tapping it while it fills if works ok replace flowmeter

Sep 09, 2008 | Whirlpool Washing Machines

3 Answers

Whirlpool 6th sense front loader awm 8121


my whirlpool 6th sense will not start all lights and power i think that it is the door sensor at fault? The green light door locked light is not on.

Jul 18, 2008 | Whirlpool AWM6100 Front Load Washer

1 Answer

Washer keeps beeping


HATE TO SAY IT BUT THE BOARD WOULD NEED REPLACEMENT.BEEPING NORMALLY INDICATES A FAULT CONDITION WHICH WOULD STOP THE CYCLE(WASH) OR THE COMPLETION OF A CYCLE.

Jun 17, 2007 | Whirlpool Duet GHW9150P Front Load Washer

Not finding what you are looking for?
Maytag MAH2400A Front Load Washer Logo

Related Topics:

529 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Bill Long

Level 3 Expert

587 Answers

John Tripp
John Tripp

Level 3 Expert

4640 Answers

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...