- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
J1 code on the XD100 series means that your toner cartridge is empty. You will need to order in a new one or have your existing cartridge refilled. Refills run about $60.00 and new ones are in the $100 to $125 range.
Precisionroller.com has a very good remanufactured unit for $46.00 http://www.precisionroller.com/search.php?q=xd100+toner
Good Luck and Thank You for using Fixya.
Make sure you have the right code: J1 or J2.
one is for the drum and the other is for the ink.
Make sure the toner unit is for this model and not for a different model.
If the old modual is still available, check the connectors at the back and see if they are the same.
If anything else Call Xerox for repair. If the cartridge was bought through Xerox have your reciete available for warrenty.
If repairs still need to be made, A Xerox service call may be needed in order to fully repair the copier and warrenty the cartridge.
There is a gear on the end of the fuse that is bad.
Google a business called The Parts Drop.
You can order that part there, less then $20 from them. No I do not work for them LOL, But deal with them often.
If you need instructions on how to replace that gear let me know.
It's not difficult to replace. And that is the problem. Guarantee it 100 percent.
J1 is a different issue. J1 means your out of toner.
The J1 error means the toner cartridge needs to be replaced. Since you just replaced the cartridge, you should remove the cartridge and repeat the following steps..
Shake the new toner cartridge
horizontally four or five times and then
remove the cover.
Slide the new toner cartridge in until it
locks in place.
It sounds like the cover may still be on the cartridge.