Okay, I cannot get this to work. I have it set to time, and have pulled the lower right button out, however when I push in the top right button all that goes around is the second hand. The other hands do not move. It's probably broken. How nice.
An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert whose answer got voted for 100 times.
An expert whose answer got voted for 20 times.
Re: viceroy sapphire ladies watch instructions
Looking at this watch I believe the lower right button changes the watch between chrono & time. Push that button until the hand in the bottom dial is on time. Then see if the bottom right button pulls out. If it does then this will put the watch in time setting mode. Now push the top right button. This should move the hands around so you can set the time. I hope this works I'm trying to go by what the watch looks like.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
For Lifemax watch instructions, go to http://www.rnib.org.uk/shop/Pages/Category.aspx?Category=talking_watches and select the model of Lifemax watch for which you require instructions. When that product page opens, scroll down to find 'product instructions'. Click on that to open the instructions in a Word document (you will need to have MS Word or the free OpenOffice suite to read it)
Klik and Crane & Viceroy are excellent and robust watches, but due to the radio control batteries need to be changed more often than ordinary watches.
Instructions for resetting the time on a Klik or Crane & Viceroy watch.
With the watch face upwards and the buttons on the right assume the buttons to be; top button - "A", middle button "B"
For setting the watch to GMT all hands need to point to 12 oclock exactly.
To achieve this press Button A until the hands start spinning. Stop the spinning when the time reaches a couple of minutes before 12 oclock by repressing A. Inch the time forward by repressing Button A until all hands are at 12 oclock.(EXACTLY). Press Button B within 10 seconds and the time will advance 1 hour and stop. The radio signal will be picked up automatically and time will set itself in a few minutes.
If you have radio dead spots avoid these when resetting the watch and do it away from magnetic or large metal objects. i.e. trays etc.
If you are refitting a new battery and have a battery that isn't quite dead, do the advancement of time with the old battery and fit the new one near to 12 oclock to get the best life out of the new battery.
If for any reason you want the watch to be in radio mode but read a time other than GMT ( no adjustment is needed for BST ), then instead of stopping the watch at 12 oclock stop it at the time in relation to 12 oclock. i.e. if you wanted the watch to read 30 minutes fast then stop the watch at 12.30.
if you want any other info my email is;