Question about Belkin Wireless G Plus MIMO (F5D9230-4) Router (1010835)

1 Answer

Configure router without cd

The instruction in the manual is for installing with modem but our connection is broadband and we don't have a modem. can you please help me on how I can install the wireless router f5d7230-4? thanks

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 33 Answers

Plug it into the ethernet connection that is connected to your computer (I assume it's this way since don't have a router) You may have to clone MAC address for this to work right. this should be in the manual as well.

Posted on Mar 08, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to instal printer on dilink dir-888


i 1 D-Link DIR-855 User Manual 0
Section 2 - Installation
If you are connecting the router to a cable/DSL/satellite modem, please follow the steps below:
1. Place the router in an open and central location. Do not plug the power adapter into the router.
2. Turn the power off on your modem. If there is no on/off switch, then unplug the modem’s power adapter. Shut down your computer.
3. Unplug the Ethernet cable (that connects your computer to your modem) from your computer and place it into the Internet port on the router.
4. Plug an Ethernet cable into one of the four LAN ports on the router. Plug the other end into the Ethernet port on your computer.
5. Turn on or plug in your modem. Wait for the modem to boot (about 30 seconds).
6. Plug the power adapter to the router and connect to an outlet or power strip. Wait about 30 seconds for the router to boot.
7. Turn on your computer.
These instruction are on the CD that came with the router
Here is the start:
D-Link DIR-855 User Manual 13
Section 2 - Installation
The DIR-855 includes a Quick Router Setup Wizard CD. Follow the simple steps below to run the Setup Wizard to
guide you quickly through the installation process.
Insert the Quick Router Setup Wizard CD in the CD-ROM drive. The step-by-step instructions that follow are shown
in Windows® XP. The steps and screens are similar for the other Windows operating systems.
If the CD Autorun function does not automatically start on your computer, go to Start > Run. In the run box type
“D:\DIR855.exe” (where D: represents the drive letter of your CD-ROM drive).
When the autorun screen appears, click Install Router.

Section 3 - Configuration
Configuration
This section will show you how to configure your new D-Link wireless router using the web-based configuration utility.
Web-based Configuration Utility
To access the configuration utility, open a web-browser such as Internet Explorer and enter the IP address of the router (192.168.0.1).
Select Admin from the drop-down menu and then enter your password. Leave the password blank by default.
If you get a Page Cannot be Displayed error, please refer to the Troubleshooting section for assistance

Click Launch Internet Connection Setup Wizard to begin.
If you want to enter your settings without running the wizard, click Manual Configuration and skip to page 19.
follow the prompts.
You also can go to D-Iink.com for setup instructions

Apr 20, 2010 | D-Link DIR-855 Wireless Router

1 Answer

How to connect broadband router to pc


Are you trying to set up the router.
You can do it manually without the CD.
Make sure that your computer is able to go online through the modem.
If your computer is not able to go online through the modem then you will need to call ISP first.
If your computer is able to go online through the modem
then you need to connect the computer to the router and the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.
Click Here for step by step by instructions

Apr 06, 2010 | Linksys Wireless-G Broadband Router

2 Answers

How do you hook up a lilnksys router after you have tried everything, including going over the instruction manual and the cd setup?


To configure the wireless router, connect a LAN cable from the router to your computer, open a browser and type in the router's configuration URL IP address. http://192.168.1.1
login = admin
PW = blank (just press Enter)

Mar 29, 2010 | Linksys Wireless-G Broadband Router

1 Answer

Yes I have a linksys wireless-G WRT54G router. and I hooked it up correctly to my modem and computer ect. Followed the instrustions on the CD but after the set up wiz got done configuring it and it tried...


Are you trying to set up router ?
You can set up your router manually, without the CD.
Make sure that your computer is able to go online directly through the modem.
If your computer is able to go online through the modem
Then you need to connect the computer to the router and the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.

Click Here for more information about the routers and network

Feb 13, 2010 | Linksys Wireless-G Broadband Router

1 Answer

I want to re-install my wireless router #2300 after my cable company installed a new modem


Are you trying to install the router.
You can do it manually without the CD.
Make sure that your computer is able to go online
through the modem.
If your computer is able to go online through the
modem
Then you need to connect the computer to the router
ad the modem to the router.
open the set up page of the router and change the
settings of the router according to the ISP.
Click Here for step by step by instructions

Jan 24, 2010 | Dell TrueMobile 2300 Wireless Broadband...

1 Answer

My WRT54G2 V1 is having connecting to my internet


Are you trying to install the router.
You can do it manually without the CD.
MAke sure that your computer is able to go online through the modem.
If your computer is able to go online through the modem
Then you need to connect the computer to the router ad the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.
Click Here for step by step by instructions

Jan 16, 2010 | Linksys Wireless-G Broadband Router

1 Answer

No activity on my new speedstream 4200


Ethernet and DSL lights are indicating you have ADSL available on your line, and that you have computers connected to the router.

What has probably happened is that Optus did not set up the new router with your username and password. Go to thw following website for details on how to setup the modem.

http://help.optuszoo.com.au/help/dsl/connected/windows/optus_modems/speedstream_4200



Manual Modem Settings The Optus DSL Broadband self-installation CD configures all the necessary settings for your DSL Broadband service. You do not need to manually configure your modem if you have run the self-installation CD. While the following information is provided for your reference, using the self-installation CD is the recommended method for configuring your modem.
The Siemens SpeedStream 4200 ADSL modem can use either USB or Ethernet to connect to your computer.
  • If you are connecting via USB you will need to run the self-installation CD to install the USB driver before you connect your modem. The Siemens SpeedStream 4200 ADSL modem supplied by Optus has been customised for the Optus DSL Broadband service. Only the USB driver supplied on the self-installation CD will work with the Optus service. If you do not have the self-installation CD, you can download the latest drivers from the Siemens website.
  • If you are connecting via Ethernet it is possible to manually configure your modem without the self-installation CD. Only a web browser is required.
After connecting your modem there are two key steps to manually configure your modem for the Optus DSL Broadband service:
  • PC settings - Configure your computer's Ethernet network interface.
  • Configure Your Modem - Set the password in your modem's configuration pages.
top
PC Settings Step by step instructions are provided for each of the supported Windows operating systems:
  • Windows 98/Me
  • Windows 2000
  • Windows XP
  • Windows Vista
top
Configure Your Modem To configure your modem settings you must now access the configuration manager using your web browser. This is done by entering the IP address in the address bar of the browser window as follows:
Note: If you are updating the password in your modem, please complete steps 1 to 3 only.
Step 1 of 5
  • Enter http://10.1.1.1 (Default IP address of the Optus Supplied Siemens SpeedStream 4200) to access the modem Configuration software. You may wish to add this page to your Favorites for easy access later.
  • The following modem System Summary screen will appear.
ss4200_home_disconnected.gif Step 2 of 5
  • Click on the word Setup in the green menu of options on the left side of the web page. An expanded set of options will be displayed.
  • Click PPP in the list of options that appeared below the word Setup.
  • The ISP Password page will appear:
ss4200_ppp.gif
  • Replace the default username (john_citizen@optusnet.com.au) with the username provided for you by Optus DSL Broadband.
  • Replace the default password with the password provided by Optus DSL Broadband in the Password field.
  • Note: You will find your Optus DSL Broadband username and password on the letter you received with your self-installation kit.
  • Save these details by clicking the Save Settings button.
Step 3 of 5
  • The next screen will ask you to disconnect and reconnect to the Optus DSL Broadband service.
ss4200_ppp_reconnect.gif
  • Click the link to return to the System Summary page.
ss4200_reboot_3.gif
  • Click the Disconnect button to disconnect the modem from the Optus DSL Broadband service. The text on the button will change to Connect.
ss4200_home_disconnected.gif
  • Click Connect to reconnect the modem to the Optus DSL Broadband service.
Step 4 of 5
  • Click on the word Setup in the green menu of options on the left side of the web page. An expanded set of options will be displayed.
  • Click the word Mode in the green menu of options on the left side of the web page.
ss4200_mode.gif
  • Confirm that Optus Bridge is the selected operation mode.
  • If Optus Bridge is not selected click the radio button next to Optus Bridge to select it.
  • Click the Apply button.
Step 5 of 5 ss4200_reboot_1.gif
  • Click the Reboot button to restart the modem using your saved settings.
ss4200_reboot_2.gif
  • After about a minute the modem will return to an operational state and connect to the Optus DSL Broadband service.
ss4200_reboot_3.gif Once the modem has rebooted and the ADSL connection has been successfully established the DSL LED indicator will light steady green.
Your modem is now connected to the Optus DSL Broadband service.

Jul 25, 2009 | Siemens SpeedStream 4200 (13A4200001)...

2 Answers

Wireless router installation


Please see my response to this question. Your university's connection is most probably a LAN connection, so you'd need to follow the instructions as if you had a cable internet connection (unlike DSL, a LAN connection and cable internet connection don't require authentication with the ISP).

Jan 07, 2008 | Linksys Wireless-G Broadband Router

1 Answer

Set up with cd on MacBook


yes you are right.. the cd which came with the router will not work with mac or vista computers..
don not worry about it, you can do a manual troubleshooting to fix this problem, i will give you a step by step procedure to fix this problem..try this out ..
To setup your router for a cable modem..
first check..
Connect the Cable modem to the computer using an Ethernet cable without the router installed and make sure that the Internet connection is active. If it is not, contact your Internet Service Provider. If it can go on line,
to setup connection..
Step 1:
Connect the Broadband modem to the router’s WAN or Internet port.
Step 2:
Connect the computer to any available numbered port (1, 2, 3 or 4).
NOTE: In this example, we’ll connect the computer to port number 3.
Step 3:
Make sure the power adapter is plugged to an available power outlet.
Step 4:
check if you are able to go on line wired..
if not your router has to be configured first,
to config your router first check this settings..
Configuring TCP/Settings in MAC OS X
Step 1:
Click the Apple icon, select Location, then choose Automatic.
Step 2:
Select Built-in Ethernet under Show.
Step 3:
Click the TCP/IP tab and select Using DHCP under Configure or Configure IPv4.
Step 4:
Leave the Search domains or Additional search domains fields blank.
Step 5:
Click Apply Now.

You should now be able to access the router’s web-based set up page and configure your router.

Accessing the Router’s Web-Based Setup Page
Step 1:
Open a web browser such as Internet Explorer.
Step 2:
Go to the Address bar and enter your router’s IP Address ("192.168.1.1" is the default IP of most Links-ys routers) then press [Enter].
Step 3:
A new window will prompt for a User name and Password. Leave the User name space blank, type in your router’s password ("admin" is the default password), then click OK.
Step 4:
When the router’s web-based setup page appears, click the drop-down arrow under the Internet Connection Type field and select
Automatic Configuration - DHCP.and then scroll the page down and click save settings..
Step 5:
Click MAC Address Clone you would find this sub tab at the top in the blue bar.
Step 6:
Select Enable and click Clone Your PC’s MAC.and click save settings..
Step 7:
Click Status at the to right side ion the black bar
Step 8:
Check the value of the Internet IP Address. If the Internet IP Address has numbers, this means the router has been properly configured. You should now be able to access the Internet. If you’re not on-line, perform a power cycle to synchronize the router with the modem.
Power Cycling
Step 1:
Shutdown the computer.
Step 2:
Unplug the router’s power cable.
Step 3:
Unplug the Broadband modem’s power cable and wait for 30 seconds.
Step 4:
Plug in the Broadband modem’s power cable and wait for its lights to appear stable.
Step 5:
Plug in the router's power cable once the modem’s lights appear stable.
Step 6:
Power on the computer on and test the Internet connection.

Now if you are on-line wired remove the cable from the laptop and check for wireless connection

i am sure this would fix your problem in case if you have any more issues revert back to me..

Nov 30, 2007 | Linksys Wireless-G Broadband Router

4 Answers

PPPoE over Edimax BR-6104K without a modem


HI,
  Actually in short  "you NEED A MODEM;"
In order to connect your router you need to connect a modem in "bridge mode'( bridge mode is nothing but a configuration on the modem)..

cd8a28a.jpg
this is a picture of  rear side of a  router,,, you have to connect the modem into the wan port of the router (above),, and in port number 1,2,3,4 you can connect your computers,

Nov 01, 2007 | Edimax BR-6104K Router (br6104k)

Not finding what you are looking for?
Belkin Wireless G Plus MIMO (F5D9230-4) Router (1010835) Logo

Related Topics:

481 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18358 Answers

steve morris
steve morris

Level 3 Expert

1675 Answers

Are you a Belkin Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...