Question about NetGear WIRELESS-G WGR614 802.11G WIRELESS ROUTER ($20.00 M.I.RebateTill 06/30/2004) (NETWGR614)

3 Answers

NETGEAR wgr614 cable wireless router

Hey, i am ahving problems with my router, i recently changed my internet supplier, i have a modem in my room for my pc and i bought a wirless cabled router for everyone in the house, my modem plugs into the router and the router goes into my pc as this is how its working at the momment, i fully registered my router at the login page, i need the wireless connection to connect to 2 laptops and 1 other desktop pc, for some reason cant seem to get any of the other pc's to connect to my router if someone has one of these routers and can give me a a-z start to finish on how to solve this problem it would be much appreciated.

Posted by on

  • 1 more comment 
  • Idariel Mar 08, 2008

    answer to solution 1 is, the laptops and the other pc is no more than 10meters away.

    solutions 2 - thats right mine has a ethernet cable hooked into a router, ok i will have a look at that manual and update you, thanks for the help so far guys.

  • murray137 Dec 15, 2008

    I am having trouble setting up my wireless network. I can connect to the internet when my D-link modem is directly connected through the Ethernet port, but whenever I try to set up an internet connection through the router, I cannot connect. It shows that I am connected in the bottom right hand corner of the screen, but whenever I try to dial in via my DSL provider, it won't connect. Please advise.

  • Darrel Barde
    Darrel Barde May 11, 2010

    both the laptop and pc desktop cant connect to the wireless router?

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

1. Connect u r DSL Modem to Wireless Router through Modem RJ-45 cable.
2. Install Wireless LAN Card Driver in 2 Laptops and Desktop PC.
3. After that, Go to My network places (Right Click) - Properties - Wireless Lan (Right click) - Properties - Enter IP Configuration Of Your ISP (Internet Service Provider) Like :- IP Address, Subnet Mask, Default gateway & DNS Servers.
4. Now u r Internet is connected & running prperly.

Posted on Mar 09, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 148 Answers

How far are the other computers from the wireless device? If you bring the laptops into the same room do they connect?

Posted on Mar 08, 2008

  • TERRI RODDEN
    TERRI RODDEN Mar 08, 2008

    make that wireless networking is enabled on both the laptop and the router.

×

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

Hello,
have you tried to follow the manual chapter 3, page 3-1 ?
If you lost your manual you can find one here:
http://kbserver.netgear.com/pdf/wgr614v6_ref_man_20Apr05.pdf

One of your computers can go online because its using a wired connection to the router, but the wireless clients cannot access the connection - is this right?

Then you only need to setup the wireless part in the router.

Posted on Mar 08, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to connect to the internet


Connect the computer directly to the modem and make sure that Internet is working through the modem.
Connect the modem and computer to the router with the Ethernet cable.
Open the setup page of the router and change the settings manually. So that your computer can access Internet through the router.

You can this website to know how to connect to the Internet using NETGEAR router.

May 21, 2012 | NetGear WGR614 Wireless Router

1 Answer

It not let me get internet service i unplug it to move from one side of the room to the other and now its not working


You may need to reboot your cable modem before plugging in the router's power cord.

Are you certain that you re-plugged the Ethernet cable from the cable modem into the correct port on your Netgear router?

If plugging your computer directly into the cable modem allows you to go online, then just re-boot the router once all of the ethernet cables are plugged in to the correct places and then power it back on, and you should be okay.

Oct 17, 2010 | NetGear WGR614 Wireless Router

1 Answer

I DONT KNOW HOW TO PUT MY NETGEAR ROUTER THROUGH MY LAPTOP , SO I CAN HAVE WIRELESS INTERNET ACCESS


u will need RJ45 CABLE (normal ethernet cable, labelled cat5e)
plug one end into laptop network connection other into laptop

login address will be (netgear) details will be under router
http://192.168.1.1pi

or something like that.

login id: admin
password: password

if u cant login then, press reset button back of wireless router, will need to do that with pen or pin?
once logged into the router, use the setup wizard and the the rest is self explanatory.

once setup is dne, with SSID and password, then plug the cable from laptop, in back of the internet modem coming into ur house from ur supplier....and ur ready to surf the web.
find your new wireless network using the laptop and insert the password....

Oct 10, 2010 | NetGear WGR614 Wireless Router

1 Answer

HAD UNPLUG MY PERSONAL ROUTER TO GO WIRELESS WITH THE CABLE COMPANY , NOW WAS VERY DISSATISFIED WITH THE WIRELESS AND ASKED TO JUST CHANGE TO TURBO AND I WOULD RECONNECT MY NETGEAR WGR614 WIRELESS ROUTER....


Connect Modem to WAN Port on Router
Connect Computer to LAN port
Checked Lights on Router
if the i-Lights amber Powercycle the Whole N/w
then if i-Green check Internet for Wired
then Loginto Router and Do Wirelesss Settings
Scan and Connect to Wireless N/w

Sep 29, 2010 | NetGear WGR614 Wireless Router

1 Answer

Cannot connect to internet using wgr614 router. connection is good without router. with router connected, internet lite blinks.


To use a router with a DSL modem or cable modem, you need to connect the modem to the router at the WAN port and then connect the PC to one of the router ports. If the cable you have been using between the modem and PC is lableled as a cross-over cable, it is the wrong type of cable for the router connection. Use a straight through cable to connect the modem to the router.

If you do not have a manual for the router, here is a link to the router manual online: http://kbserver.netgear.com/pdf/wireless_router_setupmanual.pdf

The cross-over cable could be the problem (typically yellow cable).

Jan 20, 2010 | NetGear WGR614 Wireless Router

1 Answer

PS3 and Netgear WGR614 V7 Router


Basically the PS3 wireless settings needs to be configures with the Netgear wireless router settings.
To test if the modem is connects to the Internet, connect a computer into the modem, if it works then the modem is configured correctly. If it doesn't work, then contact your ISP and get them to test your modem connection.
For details on how to configure the PS3 click on the WEB link :-
wii.php">http://fixhomenetwork.com/xbox-play-station-wii.php

Dec 20, 2009 | NetGear WGR614 Wireless Router

1 Answer

My internet exployer windows will not reconize my wireless router. I changed from Knology to Mediacom cable. Before I changed I was able to go wireless. I called Mediacom and I was told to contact Netgear....


Hey Sheila,

Follow the below steps to reconfigure the router:

CONNECTIONS:

1. Connect a Ethernet cable from the modem to the WAN port of the router (isolated port).
2. Connect the computer to the router using any one of the 4 available ports. Please make sure that there is no direct connection between the modem and the computer (either using Ethernet cable or USB cable).
3. Power off the modem and the router after making the connections.
4. Power on the modem and wait for the lights, then power on the router.

RECONFIGURE:

1. Open the browser (Internet Explorer, Mozilla Firefox or Safari).
2. Access the router, usually with http://192.168.1.1 or http://www.routerlogin.com.
3. Login to the router with the Username as "admin" and Password as "password" (please note that the Username and Password are case sensitive).
4. Click on 'Basic settings' from the left menu and select 'Use Computers MAC Address' from 'router MAC Address' section.
5. Click Apply.
6. Once it updates the settings then power off the modem and the router. Power on the modem and wait for the lights, then power on the router.
Hope this helps.

Oct 12, 2009 | NetGear WGR614 Wireless Router

1 Answer

Netgear WGR614 internet light not coming on


Hi there.
Reset the wireless router by removing the power cord from the back of it for 30-60 seconds, then plug the power back in wait for 2 mins then try to reconnect again.
If you get no joy please post back for aditional advice.

Good luck and thanks for using FixYa!!

May 11, 2009 | NetGear WGR614 Wireless Router

1 Answer

Netgear WGR614


did you make sure that the cable going from the modem is plugged into the Internet port on the router?

Apr 18, 2008 | NetGear WGR614 Wireless Router

1 Answer

Having a problem with netgear


Hi,

Hook up the Cable from the DSL or Cable modem to the Router. Run one cable from the router to your main computer.
Open up Internet explorer and type in 192.168.0.1. or 192.168.1.0 to access the router setup . Run the setup wizard,

Dec 04, 2007 | NetGear WGR614 Wireless Router

Not finding what you are looking for?
NetGear WIRELESS-G WGR614 802.11G WIRELESS ROUTER ($20.00 M.I.RebateTill 06/30/2004) (NETWGR614) Logo

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a NetGear Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...