Question about Whirlpool MH3184XP Microwave Oven

2 Answers

Whirpool microwave I am getting a error code F2 on the display. I have unpluged it for a while and pr powered it and it will still show the code F2 Can you tell me if this refers to a particular sensor ? Thank You My Whilrlpool MG1150XM is displaying F2. Unplugging it didn't do anything. Please help!

Posted by on

  • Anonymous Mar 22, 2014

    wife cleaned entire face. now F2 code shows on control panel and nothing works

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,226 Answers

Hello!

Yes, its a shorted keypad, you will need a new electronic control board,

You need to order and replace that., melnavz

Posted on Mar 07, 2008

  • Emelio Navaja
    Emelio Navaja Mar 07, 2008

    Or you can take a repair on that just examine.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 813 Answers

Take its back to show room give its back its was is in warrenty
do noting if its was in wattrety compny is replaced its free of cost

Posted on Mar 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My whirlpool microwave oven will not power up and shows a code f2. how can i fix it


its an error need to call technical assisstance ..thAT error ranges for faulty temp sensor/probe up to control board ....

Aug 05, 2014 | Whirlpool MH1150XMQ Microwave Oven

2 Answers

I have have a 10 year old Kenmore Hood/Microwave combo built by Whirpool. I'm getting an F6 error code. What is the error code trying to tell me?


F6 —Microwave Relay Failure: Check the microwave relay.

The F6 error code which is flashing on your microwave refers to a faulty relay. However, I would suggest that you first try to run a diagnostic (which you may not be able to, but it is beneficial if it works). Here is how:

The microwave oven may be provided with a self diagnostic routine that can be operated through the touch pad keyboard. To enter the self-diagnostic routine:
1.While pressing the CANCEL keypad:
a) Open the oven door.
b) Unplug the microwave oven for 2-seconds and plug it back in.
c) Release the CANCEL keypad and close the oven door.

NOTE: The humidity sensor test results will appear on the display after 8-seconds.If the tests are successful, "OK " will be displayed. If one or more of the tests fail, "ERR " will be displayed.. 2.When a keypad is pressed, a number according to the test chart will be displayed. When no keypad is pressed, a blank "—" is displayed.
If you want to try to fix it your self, Always remember Electricity is dangerous and should be treated with respect.
Microwaves are very dangerous, they can still shock you even unplugged!!
Use a metal ( not the shiny chrome type ) screw driver with a insulated handle to short across ( touch both at the same time ) the terminals of the high voltage capacitor to discharge it. With the microwave unplugged.

Hope that helps.........

Jul 10, 2008 | Whirlpool Microwave Ovens

1 Answer

Whirlpool mircowave model MH3184XP the display reads F2



There is a problem with the control pad. The membrane, or surface, of the pad may be broken or damaged somewhere, resulting in the F2 error code. This is common for Whirlpool microwaves.


Press "Stop/Cancel" twice and select a new cook program. Press "Start" to begin.

If the error code persists, press "Stop/Cancel" again and unplug the microwave. Wait several minutes and plug it in. If the F2 code appears again, it requires repair.


Replacement membranes can be found online


http://www.appliancepartspros.com/whirlpool-panel-asy-control-8205376-ap3775860.html


but the internals of a microwave are dangerous, having high voltages even when unplugged. With the cost of parts and labour from a service tech, you may be best buying a new oven.

Sep 04, 2013 | Whirlpool MH3184XP Microwave Oven

1 Answer

Whirlpool ADG 4956 - problem F2


Hi, here is the answer for f2 "F2 - error code means "Shorted keypad".
Remove power from the range, open the control panel and unplug the membrane switch ribbon from the control board.
Reconnect power to the range and observe for an hour.
If the error code reappear - replace the control board.
If not - replace the membrane switch.

Apr 24, 2011 | Whirlpool Microwave Ovens

1 Answer

Kitchenaids microwave error message F2.Q1. What to


F2.Q1 Not reading keypad
inputs
1. Unplug microwave oven or disconnect power.
2. Replace the user interface board (UIB).
3. Replace the door control assembly.
4. Replace all parts and panels before operating.
5. Plug in microwave oven or reconnect power.

Many of the error codes may be solved by power cycling: unplug microwave oven or
disconnect power. After one minute, plug in microwave oven or reconnect power.

i found this info on a tech sheet hope this helps, let me know how it goes... some of those electronics had 5 year parts warranty i would check that out....Also u might be better of buying a new one if its out of warranrty as some of those boards are expensive, obvioulsy unplug unit first try to reset it self.

Feb 14, 2010 | KitchenAid KHMS2050SSS Microwave Oven

2 Answers

Microwave beeping and F2 error code


hi,
The F2 code is a keyboard failure. Since it's intermittent I would check for a loose wire/connection. open the control panel and reset the ribbon cable on the circuit board....


thank you,
vijay (vote for me)

Sep 23, 2009 | KitchenAid KHMS155LSS 1000 Watts Microwave...

1 Answer

F2 Error


F2 is a membrane switch error.

1. Unplug microwave oven or disconnect power.
2. Replace membrane switch.
3. If problem persists, replace electronic control.
4. Replace all parts and panels before operating.
5. Plug in microwave oven or reconnect power.

The answer to your question is YES. I would venture to say the PART is - but not the labor. You would need to read your warranty to confirm.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Sep 11, 2009 | KitchenAid KHMS155L Microwave Oven

1 Answer

Kenmore microwave model 63792 displays F2 error message


The F2 error code on your microwave oven is a membrane failure.
It is recommended that you replace the membrane first & if you still have problems to replace the control board.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Aug 21, 2009 | Kenmore 63792 Microwave Oven

1 Answer

I have a Kenmore Elite Speedcook microwave model 63792-The display light beeps every few minutes and stays on rather than dimming after use. I unplugged and a message "call Service F2" came up-I used the...


The F2 error code on your microwave oven is a membrane failure.
It is recommended that you replace the membrane first & if you still have problems to replace the control board.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Jul 13, 2009 | Kenmore 63792 Microwave Oven

1 Answer

Whirpool microwave


check the operation of the micro switches on the lock motor. that they are open when they should be and closed when they should be. often they need to be cleaned or replaced.
if this doesnt help re post there is some board work to do, i would suggest a tech do this part though. always unplug range when you work on them! If you are good at electronics and stuff and would like to do it yourself then contact me for further support!
Regards,
Vij

Nov 21, 2007 | Whirlpool MH3184XP Microwave Oven

Not finding what you are looking for?
Whirlpool MH3184XP Microwave Oven Logo

588 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

8820 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

sonic boom...
sonic boom...

Level 3 Expert

1557 Answers

Are you a Whirlpool Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...