Question about Westinghouse TX-42F430S Television

1 Answer

NO SOUND My TV has no sound again!!! I typically do the reset suggestion and it works. It won't work this time. Any suggestions??????

Posted by on

  • 1 more comment 
  • tnccotter Sep 21, 2008

    I have sound through the DVD player but not the TV????

  • Anonymous Jan 05, 2009

    I can see my cable but i cannot hear anything.

  • throck1 Jan 18, 2009

    Suddenly and without warning, I have no sound (picture only) on both my Satellite receiver and DVD player. Both are connected with HDMI cables and have worked fine in the last week or two. Xbox 360 is the only hardware that seems to still have sound. Tried other methods of connection, but no joy. Very, very frustrating.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

REMEMBER VIDEO AND COMPOSITE SHARE SAME AUDIO SOURCE...CHECK AUDIO SETTINGS TO SEE IF HDTV AUDIO IS SET TO MINIMUM...IF SO, CHANGE TO HIGH..OF COURSE YOU MADE SURE MUTE IS NOT ON...PRESS VOLUME UP ON REMOTE..IF STILL NO SOUND...YOU HAVE A DEFECTIVE AUDIO/VIDEO PROCESSOR CIRCUIT BOARD..P/N 667-L32K5N-40...TRY ANDREWS ELECTRONICS IN CALIFORNIA..OR YOU CAN SEND BOARD TO PTS ELECTRONICS FOR REPAIR OR BOARD SWAP..JOE ACE

Posted on Jun 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

RCA model# L46WD22YX11, TV works, Sound bar on screen moves but no sound. Any suggestions.


Sounds like ( pardon the pun!) one of the TVs chops on the circuit board are gone. Costly enough repair, how old is the T.V? Is it under warranty?

Jan 18, 2015 | RCA Flat Panel Televisions

1 Answer

I have LG 32LC46-ZC TV. It suddenly stopped working, no picture, no sound. The LED blinks 5 times after turning on, but nothing else. Any suggestions?


These blinks (flashes) are fault indication. By the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit stage inside the TV. Count the blinks occur at one time switch ON, carefully. Do it once again, and make sure about the number of blinks. If the flashes are continious, non-stop, the main system control IC should be suspected. If you wish to get more details, check the site linked here. It has blinking codes detail to many brand TVs. Pull up older posts. Check the site in 'Mosaic' view. It will make search easy. http://electronicshelponline.blogspot.com/

Jan 19, 2014 | LG Flat Panel Televisions

1 Answer

Screen and sound cuts out at times.


I would check the power board capacitors. Many people are losing the electrolytic caps on these boards. It is possible yours are failing only when they heat up.

Apr 13, 2013 | Flat Panel Televisions

1 Answer

I'm trying to hook up a sharp aquos tv to an rca surround sound receiver and it won't work? any suggestions? I have tried turning off the speakers on the tv....


First thing to do is get the owner manual for each and start checking both settings and actual hookup---usually a surround system will work on all types of sets---when in doubt read the owner manuals.

If need either manual Google that model number with "manual" to try to locate it.

As far as the set goes it may require either a variable audio output source or in some cases the out to be a fixed level.

May 23, 2012 | Sharp Aquos LC-42D62U 42 in. LCD HDTV

1 Answer

My TV is just over a year old and out of warranty. When i turn the TV on, I can see a backlight/glow to the screen, but there is no picture, not even the usual screensaver blue screen I usually have on...


Sound like ur Tuner board have problems or dead.Tries unplug,replug the tv an hour later let it reset itself.The tv might work again,somtimes u have to turn the off/on the power button again couples times to make the tv work.Not replaced the Tuner signal board should solved ur problems.

Apr 19, 2010 | ViewSonic N4785p 47 in. LCD TV

1 Answer

I have a Philips Plasma tv 42pf5321d/37 with sound but no picture


Thats the great sound of Exploding capacitors on either the power supply board. or another one in there. Now the set is in fault protection. It tried to warn you with the RED blinking LED that there was something amiss by shutting itself down. When you unplugged you reset the error and allowed it to do it again.

Best Regards and Smper Fi

Jun 23, 2009 | Philips 42PF9630A 42 in. Plasma Television

2 Answers

TH-42PX80U


i have the same problem but i have 11 blinks

Aug 13, 2008 | Panasonic TH-42PX60U Television

1 Answer

Plasma TV


This usually means that the TV was last shutoff by using the sleep timer. When that happens it usually needs to be turned on and off 2 or 3 times, or try using the main power button on the tv or simply unplugging it. A full reset probably wouldn't hurt either.

Jan 21, 2008 | Flat Panel Televisions

Not finding what you are looking for?
Flat Panel Televisions Logo

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Westinghouse Flat Panel Televisions Experts

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

The Knight
The Knight

Level 3 Expert

68153 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Westinghouse Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...