Question about DVD & Blu-Ray Players

1 Answer

CD Audio problem

Why can I not play an audio cd on my hp pavilion with lightscribe dvd - cd player? Actually the disc plays and track info is displayed on windows media player but I get no sound. There is no problem playing a DVD.

Posted by on

  • mrfixit3 Mar 07, 2008

    Thank you for so speedily diagnosing my problem. I fixed-it easily by activating the digital out. I don't why this happened because when I purchased the computer two years ago it worked fine. Anyway if it happens again I will be able to correct it with "no sweat" thanks to you. Thank you very, very much!!

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 46 Answers

Hello...try to accsess the volume control panel and check that the "cd volume" is not deactivated...and that you have the right connection to your sound card output..i.e. speaker out...plus maybe you must activate digital out..because of that you have always two systems to playback cd's analog or digital..please tell me if youfixit...good luck...Ron

Posted on Mar 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I record a music cassette to a music disc on my Magnavox DVD recorder/ VHS --Model # ZV427MG9


You can't burn a CD-A with the ZV427MG9. The unit will not burn to a CD to play in a CD player.

You may be able to record the audio to a DVD with no video source. Connect your cassette player to the Line In audio ports (L/R) at either the back or front of the unit. Depending on your cassette player, you may need a 3.5 mm M to RCA F/F adapter to connect the RCA audio cable to the cassette player's headphone jack. Do not connect a cable to the video input of the composite input unless you have a video on a camera or something to play back. This means that the recorded video may say "No Signal" or will be black or static. (Note: this may not work with this signal issue.)

Set the unit to record to DVD on L1 or L2, as needed, by pressing Source on your remote. Advance the cassette to where you want to record. Press Rec on the DVD unit and then press Play on your cassette player. If you want to identify tracks, Stop the recording and play back and then press Rec and Play again. You are at risk of having issues with the volume during the recording. Clipping of overly-loud sounds and distortion is possible.

When done, finalize the disc, if desired, to play the disc on other DVD players.

If you want to make an audio CD, you would be better off using a computer and connecting the cassette player to the Line In jack of the computer. You do have to make some adjustments to avoid recording the default Microphone input. Use a program like Audacity or any other audio editing program. Record the signal and divide it into tracks, if needed. Now you can filter out any distortion as well. Then save as a WAV file. Use a different program to burn the WAV files to a CD-A. (This must be burned as a mastered disc; my attempts that worked on an older CD player failed if there were gaps between the tracks. Lots of programs will do this; Roxio Creator is one option.)

The manual for the ZV427MG9 is available here: http://download.p4c.philips.com/files/z/zv427mg9_f7/zv427mg9_f7_dfu_aen.pdf .

I hope this helps.

Cindy Wells

Dec 31, 2012 | Magnavox DVD & Blu-Ray Players

1 Answer

What video formats are playable on the Phillips DVP 3120?


DVP3120 can play all DVD, VCD,MP3 and Audio CD and Support the below formats
Audio Video format NTSC & PAL
DVP3120 will play CD, CD-R/CD-RW, Video CD/SVCD, DVD, DVD-R/-RW, DVD+R/+RW, DVD-Video Discs as well as MP3-CD, MP3-DVD, WMA-CD discs and MP3, WMA and JPEG Files.

Let me know if this helps

Nov 27, 2009 | DVD & Blu-Ray Players

1 Answer

When playing a DVD, picture & audio stop for a second one a while, no problem when playing a CD


this may just be the mechanism changing diretion as it reads the second layer on the disc usually because the film is too long to go on one side of the dvd disc.
quite normal.
but if happening quite a lot during playing a film then it could be something as simple as cleaning the mechanism. NOT for the untrained

Jun 01, 2009 | Teac DV-H550 DVD Player

2 Answers

Dvd not playing dvds


Basic Information:

i) try to choose  right burner for eg: Nero CD/DVD Burner

ii) try to choose the right format,

     for eg: MP3/MP4/ Audio Songs will come under Audio format
               in such case select "Audio CD/DVD format" in Nero CD/DVD Burner


     for eg: .DAT/MPEG/MP4/Video will come under Video format

                in such case select "Video CD/DVD format" in Nero CD/DVD Burner


     for eg: "DATA CD format" is only storing some data on CD/DVD iresspective whether it is                            Videofile or Audio file, 

                these "DATA CD formated" CD/DVD when played in DVD Player will play only Audio files 
                but no Video Files 

   
   

Dec 26, 2008 | DVD & Blu-Ray Players

1 Answer

Discs will not play on any other machine


I have the same problem with a brand new HP Pavilion PC running Windows Vista with a LightScribe DVD reader. I downloaded the latest driver from LightScribe, but the system refuses to recognize it. A request for help from HP hasn't been answered yet.

My son has the same problem with his custom machine running Windows XP.

Aug 24, 2008 | Sansui VRDVD4005 DVD Player/VCR

1 Answer

Phillips pet 706/05 dvd player wont dvd-r-rw


  • Disc not loaded. Load a disc into the player, close the door and press PLAY.
  • The disc used may be defective. The disc used may be defective, try another disc.
  • The disc is placed improperly in the tray. Make sure the disc is properly placed and centered in the tray and if the disc has a label on one side, make sure the label is facing up.
  • The disc is dirty. Use a soft cloth to clean the disc by wiping in a straight line from the center of the disc to the outside edge.
  • Use of DualDisc or Flip Disc which does not meet the Compact Disc Digital Audio Standard. Some music labels have recently introduced the DualDisc for pre-recorded audio and video content. The DualDisc bonds DVD content on one side 'back-to-back' with digital audio content on the other side. However, the digital audio side does not meet the technical specifications specified in the Compact Disc Digital Audio Standard. For this Reason, DualDisc is not permitted to carry the CD logo. Philips DVD and CD players and disc drives fully comply with the CD specifications and therefore may not recognize the DualDisc. Attempting to use DualDisc may lead to playback problems or jamming in the slot loader or drive.
    The DVD video content on the DVD side of the DualDisc should play on Philips DVD players and DVD drives. However, Philips DVD players and drives do not support DVD Audio, and will not play any DVD Audio content present on the DVD side of a DualDisc. Philips will further investigate DualDisc and update this notice accordingly.

Jul 18, 2008 | Philips DVD & Blu-Ray Players

1 Answer

Magnavox DVD Video Player DVD609AT


DVD609AT:

The manual is available at Philips website, the number for more info in manual is out-of-date; the new number is 1-800-605-8610


This unit has a problem when playing dual-layer discs of some kinds - read the warnings on the Magnavox website - playing the wrong kind of disc will cause an error that will require svc/repalcement to fix

Playable Discs
This DVD Player will play Digital Video Discs (DVDs) and Audio CDs. In order to play a
DVD or Audio CD on this DVD Player, make sure the Disc meets the requirements for
Region Codes and Color Systems as described on this page. Also, the Discs should have
the following logos and should meet these standards.
• CD-ROM
• Compact Disc-Interactive
(CD-I)
• Compact Disc-Recordable
(CD-R)
• Digital Video Disc-Video
Recordable (DVD-VR)
• DVD-RAM
• DVD-ROM
• Super Audio CD (SACD)
• Photo CD
• Video CD
• Video Single Disc (VSD)
Digital
Video
Disc
12 cm
12 cm
Approx. 4 hours
(single-sided)
Approx. 8 hours
(double-sided)
Approx. 80 minutes
(single-sided)
Approx. 160 minutes
(double-sided)
20 minutes
8 cm
8 cm
(singles)
Logo
Maximum
Disc Type Contents Playback Time
Sound
and
Pictures
Audio
CD
Disc Size
Sound
74 minutes
Disc
Segments
DVDs are
divided into Titles,
which are divided
into Chapters.
Titles and Chapters
are numbered.
Audio CDs are divided
into numbered Tracks, i.e.,
a track may be one song.


Unacceptable Discs
If you insert an unacceptable type of disc, “Please insert a playable disc” will appear on
the TV screen. Also, “- - - - - “ will appear on the DVD Player display panel. Insert a
DVD or Audio CD. The following Discs will not play on this DVD Player.

• CD-ROM
• Compact Disc-Interactive
(CD-I)
• Compact Disc-Recordable
(CD-R)
• Digital Video Disc-Video
Recordable (DVD-VR)
• DVD-RAM
• DVD-ROM
• Super Audio CD (SACD)
• Photo CD
• Video CD
• Video Single Disc (VSD)

May 28, 2008 | Philips Magnavox DVD/VCR Dual Player

1 Answer

What video formats can you play with slv-d360p?


Hi al - your unit can play the following formats:

DVD VIDEO
DVD -R / - RW
DVD +R / +RW
CD -R / -RW
VIDEO CD
MUSIC CD

The player can play CD-ROMs/CD-Rs/CD-RWs recorded in the following formats:

- music CD format
- video CD format
- MP3 audio tracks and JPEG image files of format conforming
to ISO 9660 * Level 1/Level 2, or its' extended format, Joliet Kodak Picture CD format.
*(A logical format of files and folders on CD-ROMs defined by ISO)

The player can play DVD-ROMs/DVD*RWs/DVD+Rs/DVD-Rs recorded in the following formats :

- MP3 audio tracks and JPEG image files of format conforming to UDF(Universal Disk Format).

In other words, just about everything. If this answers your question PLEASE rate this as fixed. If you need more help just add a comment and I'll be happy to assist you further. Thanks.

Jeff

May 12, 2008 | Sony SLV-D360P DVD Player/VCR

1 Answer

Toshiba SD-K860 DVD Player wont load DVD's


Having the same problem. DVD player loads enough to identify it is a DVD or a CD, but won't actually start playing anything.

Oct 29, 2007 | Toshiba SD-K860 DVD Player

1 Answer

Mp3 disk no audio when playing


First, make sure the CD is an AUDIO CD, and not a DATA CD

If you have recorded a Picture CD or MP3 CD
yourself, ensure that your disc contains at least 10
pictures or 5 MP3 tracks.

MP3(ISO 9660) 96, 112, 128, 256
kbps & variable
bit rate fs, 32, 44.1,
48 kHz

– MP3 discs, picture (JPEG) files
on CD-R(W).
– JPEG/ISO 9660 format
– Maximum 9 characters display.
– Supported sampling frequencies :
32 kHz, 44.1 kHz, 48 kHz (MPEG-1)
16 kHz, 22.05 kHz, 24 kHz (MPEG-2)
– Supported Bit-rates : 32~256 kbps
(MPEG-1), 8~160 kbps (MPEG-2)
variable bitrates

Oct 02, 2007 | Philips DVD 622 DVD Player

Not finding what you are looking for?
DVD & Blu-Ray Players Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top DVD & Blu-Ray Players Experts

kakima

Level 3 Expert

96518 Answers

The Knight
The Knight

Level 3 Expert

68301 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...