Question about Washing Machines

2 Answers

Maytag Neptune Tl Washer - put it on Normal cycle this morning, checked before I left for work and the time remaining was 33. Got home from work and it was still on 33, making the clicking sound once, then again, but did not move to any cycle like it usually does. I turned it off and tried the quick wash (27 mins.), and it went to 26, 25, 24 but it was making a noise that it doesn't usually make. Then again it got stuck - this time at 24. Any ideas?

Posted by on

  • jeannejme Mar 07, 2008

    Thanks. How difficult, on a scale of 1 to 10, would it be to change a timer switch?

  • jeannejme Mar 07, 2008

    Thanks for the help! I'm going to give this job to the hubby, along with the cold one!

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 128 Answers

As the commercials say, "Call the Maytag repair man" Their numbers are (866) 616-2601 U.S, (800) 688-2002 Canada. They should be able to help you fix your Maytag washer. Good Luck :)

Posted on Mar 07, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 3,587 Answers

Yeppers..you have a bad timer switch on that unit..

Posted on Mar 07, 2008

  • 3 more comments 
  • Patrick Michaels
    Patrick Michaels Mar 07, 2008

    happens after a period of time. how 'handy' are you or anyone else on your location?

  • Patrick Michaels
    Patrick Michaels Mar 07, 2008

    might be a good time to call your neighborhood friendly Maytag repair person, eh?

  • Patrick Michaels
    Patrick Michaels Mar 07, 2008

    here's a fairly good resource that you may find of interest for this situation.

  • Patrick Michaels
    Patrick Michaels Mar 07, 2008

    4 to 6, depending on whether you are fully certified on heavy equipment(just kidding) regular tools, patience, and perhaps a cold one at the end, might get you there..check my link in my comment, for the information you'll need.

  • Patrick Michaels
    Patrick Michaels Mar 07, 2008

    good answer..hope you found the help here worth the money, and the time.

    thanks for using Fixya..

    check your computers warranty here 4 FREE

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wash cycle are running to long


FIXED Maytag Neptune, Timer Problem - ApplianceBlog

www.applianceblog.com/.../23387-Maytag-Neptune-Timer-Problem

Mar 4, 2011 - 8 posts - ‎3 authors
My countdown timer is stuck at the 33-minute level in the "wash cycle", and repeatedlyruns for a 30-40 seconds, then stops, then runs, then ... Maytag Neptune TL Washing Machine stops in spin cycle ...
10 posts
Jul 25, 2013
Maytag Neptune Washer Won't Spin/drain
7 posts
Jul 4, 2013
Neptune TL Washer FAV6800AWW - DC and UC ...
5 posts
Jul 3, 2007
MAYTAG NEPTUNE WASHER CONTROL PANEL ...
8 posts
Jun 29, 2005
More results from www.applianceblog.com

Troubleshooting a Too-Long Wash Cycle - whirlpool washingmachine ...

ask.metafilter.com/233920/Troubleshooting-a-TooLong-Wash-Cycle
Jan 25, 2013 - We have a Whirlpool Duet washing machine (about 2 years old). Thecycle is taking WAY too long to complete. The load that's running now ...

Maytag Neptune washer repair: motor/motor control circuit ...

? 12:10
https://www.youtube.com/watch?v=ITTbDh8CFEU
Dec 11, 2013 - Uploaded by daytonaturbofreak
Maytag Neptune washer motor/motor control circuit board ... my board just fried - is your washer still working? wondering how longthe conversion fix will last. ... Other times it will run a completecycle without any malfunctions.

Jan 11, 2016 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

Maytag Neptune TL


The TL neptune has a small shock absorber on the middle left hand corner behind the front panel. it uses a small wiring clip that could be loose, with a type of inertia switch.
A common issue I've encountered with this machine is underloading. The snubber and springs allow a fair amount of movement. Don't do a few simple items or mixed load in this machine.
If these don't seem to help, let us know.

Nov 04, 2012 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Washer stop at 33 minutes remaining on was cycle.


If you want to get a clue you need to post your issue ai a true DIY forum.

I can't find most of my repair post in this forum. This forum to me is a "Call In a repair tech forum" for this model and that is OK if you can't do basic DIY repairs.

I don't want to put in a direct link to the washer repair forum of my choice so put in your browser this phrase;

Appliance Repair Forums > Appliance Repair Talk > Washers > Maytag/Magic Chef/Admiral/Jenn-Air

This is a true DIY Appliance repair forum.

In the Sticky: Neptune TL Washer FAV6800AWW 5 post down you will find a link to the Service Manual. You absolutely need the Service Manual to DIY issues with the machine. It's not the best SM but will get you started. I also have repair post in that sticky to help with the most common issues with the machine.

If you need help open a post in that repair forum and I will try help you through your issue.

Feb 10, 2011 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Washer will not run the cycle or unlock


Jolein,

For the FAV6800A and FAV9800A and most other TL machine models. You can raise the top of the machine to access the wash basket load.

Insert a flat blade putty knife approximately 2.5” from the left and right sides of the washer top, depress the spring tabs securing machine top to the washer base. See page 33 of the Service Manual for putty knife insertion point.

The Service Manual for reference. Sears Parts Direct for reference.

What is your machine Model#?..........Rich


Jun 21, 2010 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Has 33 minutes and a error message of nd--maytag Neptune tl



What is the Model number of your machine if its a FAV6800A or FAV9800A please read on.

The ND error code means No Drain.

You could have a drain line clog or a stuck Pressure Switch contacts.

See this post for past troubleshooting;

http://www.fixya.com/support/t2209123-code_nd_fav6800aww_serial_number_10

There are links to the Service Manual and I go over how to put the machine in Service Mode to check that the Pressure Switch is signaling properly.

Do you want to DIY the repair?

Let me know.........Rich

May 19, 2010 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Maytag neptune tl makes grinding sound and stops at 33 minutes in normal mode and at 24 minutes in quick wash mode



Hello djlampl,

With the lowest spin cycle setting I enter spin cycle in Quick Wash around the 21 minute mark. But first question is do you hear the grinding noise with the tumblers rotating during the wash/agitate cycle?

If you start a spin only cycle do you hear the grinding noise?

Does the washer error code out with an error code to the display? Codes such as dC, uC, Lr?, I assume the machine type is a FAV6800AW is that correct?

Any additional info will help in troubleshooting…..Rich

Assuming the machine type is a FAV6800A/FAV9800A here are some handy links;

The Service Manual for reference. Sears Parts Direct for reference.


Nov 24, 2009 | Maytag Neptune FAV6800AW Top Load Washer

2 Answers

Neptune tl washer


You will need to replace your timer control.


John

Sep 28, 2009 | Maytag Neptune MAH5500B Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...