An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert who has written 20 answers of more than 400 characters.
An expert who has answered 20 questions.
Re: Linksys BEFW11S4-RM 4 port wireless router
This is an old router. Look at the power light. You must have a STEADY power light. RESET the BEFW11s4 by pushing the reset button for 30seconds. Unplug the power of the BEFW11s4 for 30 seconds. Connect pc to port 2 or 3. pc should get an ip of 192.168.1.x. If you are getting this ip that means that the pc is already detecting the router.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
WRT54G 2.4 GHz Broadband Router with 4-Port Switch:
Go to LinkSys
Resetting the Router will erase all of
your settings (WEP Encryption, Wireless and LAN settings, etc.)
and replace them with the factory defaults.
There are two ways to reset the Router's factory defaults:
Press the Reset Button for approximately 10 seconds
Default backdoor passwords On older LinkSys routers, the default username is blank and the default password is "admin." On newer Linksys routers, both the default username and the default password are set to "admin."
WAP11 MULTI n/a (none) LINKSYS DSL TELNET n/a admin LINKSYS ETHERFAST CABLE/DSL ROUTER MULTI Administrator admin LINKSYS LINKSYS ROUTER DSL/CABLE HTTP (none) admin LINKSYS BEFW11S4 Rev. 1 HTTP admin (none) LINKSYS BEFSR41 Rev. 2 HTTP (none) admin LINKSYS WRT54G HTTP admin admin LINKSYS WAG54G HTTP admin admin LINKSYS LINKSYS DSL n/a admin LINKSYS WAP54G Rev. 2.0 HTTP (none) admin LINKSYS WRT54G Rev. ALL REVISIONS HTTP (none) admin LINKSYS MODEL WRT54GC COMPACT WIRELESS-G BROADBAND ROUTER MULTI (none) admin LINKSYS AG 241 - ADSL2 GATEWAY WITH 4-PORT SWITCH MULTI admin admin LINKSYS COMCAST Rev. COMCAST-SUPPLIED HTTP comcast 1234 LINKSYS WAG54GS MULTI admin admin LINKSYS AP 1120 MULTI n/a (none) LINKSYS PAP2 / PAP2V2 (VONAGE) HTTP admin admin LINKSYS RT31P2 (VONAGE) HTTP admin admin LINKSYS RTP300 (VONAGE) HTTP admin admin LINKSYS WRT54GP2 (VONAGE) HTTP admin admin LINKSYS WRTP54G (VONAGE) HTTP admin admin LINKSYS/ CISCO RTP300 W/2 PHONE PORTS Rev. 1.0 HTTP admin admin LINKSYS/ CISCO RTP300 W/2 PHONE PORTS Rev. 1.0 HTTP user tivonpw also, holding the reset button for about 30 seconds will clear the password usually. hope it helps. If this helps you resolve your problem, please consider giving me a good rating .It will help me as well. Thank you.
You dont need an admin account or installation disk to install the Linksys router that you have.
Just get an Ethernet Cable plugged in to 1 of the 4 ports at the back of your router and plug it to your computer.
Then Access your router via your computer by opening Internet Explorer and type 192.168.1.1 to the address bar.
if it would ask you for Username and Password, default should be the one below.
As you can see you just need leave the password blank and put admin to the passowrd.
if this password doesnt work just press the reset button at the back of the router for ten seconds and restart the router.
After that try accesing the router again. It should now let you access your routers setup page.
Absolutely. You seem to have answered the question yourself. There is no way that the router change can affect the performance of the mouse .
1. try this mouse now with another port in the computer.
2. Try this mouse in a different PC
Atleast that you isolate teh problem. This change in router has ntohing to do with a wired mouse's functions.
1. Make sure the wireless is disabled when you're doing that. It might cause a confusion between the wired and wireless connection.
2. Try to plug it at other ports (1-4)
3. Try another known working ethernet or CAT-5 cable.
4. Set the laptop's LAN card's speed to 10-hald duplex.
Your wired network adapter will talk to a wired router without a driver for the router on your computer. Your wireless adapter likewise will talk to your wireless router without a driver for the wireless router on your computer. Your wired and wireless adapters however do require drivers and the wireless adapter can require configuration. Please provide the manufacturer and model of your computer so I can learn about your wireless adapter and we can work to get it connected to the router.
Do you currently have your router connected to your internet service providers connection and do you have another wired or wireless computer successfully using this device to access the internet?
To setup your router first check.. Connect the Broadband modem to the computer using an Ethernet cable without the router installed and make sure that the Internet connection is active. If it is not, contact your Internet Service Provider. If it can go online, to setup connection.. Step 1: Connect the Broadband modem to the router’s WAN or Internet port. Step 2: Connect the computer to any available numbered port (1, 2, 3 or 4). NOTE: In this example, we’ll connect the computer to port number 3. Step 3: Make sure the power adapter is plugged to an available power outlet. Step 4: check if you are able to go online wired.. if not your router has to be configured first, config your router by running the setup cd and that would fix your problem..
let me no know in case if you have any problems ...