Question about Sharp AR-5316 Advanced Digital Imager Copier

2 Answers

Sharp AR-5316 Hi, Can anyone help me on this, it is really urgent! Got me a Sharp AR-5316 3months ago for my little office, came to work yesterday and saw "F2" flashing in the display continuosly and the machine won't respond to any command. Please, how do i get this fixed? Dale.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

F2appears when you change a new tonner that is not compactable withthe developer


Find a good tonner or change the developer aswel

Posted on Apr 03, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,072 Answers

Never heard of an F2 on that machine. But give this a try.

Performing a Fault Reset 14 will reset your WorkCentre and will help to clear error codes.

  1. Find the pink Clear button on the Control Panel of the WorkCentre.
  2. Find the button below the word Auto.
  3. Press these buttons in the following sequence: [Clear], [Auto], [Clear], [Auto] NOTE: All of the lights on the Control Panel should go out and the LED Display should go blank. If the lights do not go out, then repeat step 3 until they do. It may be necessary to increase or decrease the pace of the [Clear], [Auto], [Clear], [Auto] sequence.
  4. Press the [10's] key one time and the [1's] key four times to enter '14' in the LED Display, as if you were to make 14 copies.
  5. Press the green [Start] button.
  6. Press the pink [Clear] button two times.
  7. The WorkCentre should now warm up and come to ready.
  8. If the above steps do not clear the error code, repeat steps 3 to 6 a second time.
Sharp AR-5316 - elem_1_spacer.gif

Posted on Mar 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

How to fix Sharp Copier AR-5731 Error code


good day, my Sharp AR 5731 showing the message Call for Service . Code : H4-00 can you help me to fixed my problem. thanks and God Bless

Mar 11, 2013 | Sharp AR-BC260 Color Copier

1 Answer

Sharp AR 5618S Error F2


Hope this help.
Hold down the copy start button
You will get F2 flash then 2 numbers will flash

http://www.manualslib.com/manual/902246/Sharp-Ar-5618.html?page=55#manual

Jul 06, 2012 | Sharp Printers & Copiers

3 Answers

My Sharp Copier Model AR-M160 showing f2 error even I replace the new tonner.


Below are the F2 errors and causes for Sharp AR-M160

"F2-31" Image density sensor fault
"F2-32" Drum mark sensor fault
"F2-33" Grid voltage correction problem
"F2-35" Grid voltage correction problem
"F2-37" Drum mark sensor fault

Cause : CRUM chip defect OR Improper developing unit
Check and remedy : As you have already replaced the tonner, we can suggest Replace the CRUM chip,Replace the developing unit

Regards,
Shrey

Jun 01, 2011 | Sharp AR-M160 Laser Printer

3 Answers

I am using Sharp AR-M201 photo copier machine. I just came across a error message ` System Error F2-02 Refer to user guide' Can anyone guide me to solve this problem? Thanks K K Mendon


F2 -02 Toner supply failure
cause :-
- developer unit trouble

- Toner supply abnormality caused by
installation of unpacked toner cartridge

Dec 26, 2010 | Sharp AR-M205 Copier

1 Answer

Olivety


F2 means that an improper cartridge has been installed. Look for the exact type that you used before and it will work.

Mar 26, 2010 | Sharp AR-5320 Black and White Copier

4 Answers

F2-02 Error on Imagistics ZB35 machine


Sharp AR-5620N getting f-2 error. What is the solution

Mar 03, 2009 | Sharp AR-M237 Copier

3 Answers

REPLACING THE TONER


HI! I HAVE BOUGHT THE SHARP PRINTER/COPIER/FAX/SCAN MODEL AR-M155, WHEN I INSERTED THE NEW TONNER AND MAKE THE PHOTOCOPY TESTING I GOT THE OUTPUT COPY WHICH SHOWS THE HALFED COPY IN VERTICAL ON RIGHT HAND SIDE WHEN YOU READ THAT PAPER SO WHAT COULD BE THE PROBLEM ON IT WHILE IT IS NEW MACHINE???? AM SCARED!!!. PLEASE IWOULD BE VERY HAPPY IF YOU HELP ME TO SOLVE THIS MY REQUEST PROBLEM.

THANKS,

Aggrey34

Sep 16, 2008 | Sharp AR-5316 Advanced Digital Imager...

2 Answers

Error code F2-45


Ihave Sharp AR-C160. WHAT DOES THIS H4-01 ERRO CODE MEAN? How do I clear it?

Jul 18, 2008 | Sharp AR-C160 Color Copier

5 Answers

F2-02 error on Sharp AR-M237


on this code you may have to clean out the developing unit and start with fresh developer. Make sure the developer unit is not leaking from one of the bearings. You may need a tech for this one...

May 23, 2008 | Sharp AR-M237 Copier

13 Answers

Error code 4H on sharp ar 5316


WHEN THE SHARP AR-5316 PHOTOCOPIER IS SWITCHED ON THE ERROR CODE 4H APPEARSAND THE MACHINE CANNOT BE OPERATED. IHAVE TRIED THE SOLUTION SUGGESTED JUNE THIS YEAR BUT IT DID NOT WORK. WHAT CAN I DO TO GET THE MACHINE TO WORK? IT IS VERY URGENT.

Feb 18, 2008 | Sharp AR-5316 Advanced Digital Imager...

Not finding what you are looking for?
Sharp AR-5316 Advanced Digital Imager Copier Logo

241 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Printers & Copiers Experts

George Mclaughlin

Level 2 Expert

330 Answers

Soulvisitor
Soulvisitor

Level 3 Expert

1113 Answers

Vito Suglio

Level 1 Expert

23 Answers

Are you a Sharp Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...