Question about Televison & Video

2 Answers

TV Snow and Static Sound

TV-Model CS-2610R connected to VCR HS-U32. When both are turned on there is white snow and some sound. The same program shows through no matter which channel is tried. The video channel setting on the back of the VCR is set to No. 4. The remote controls for the VCR and the TV both have new batteries and both work. The remote for the VCR has Video/TV, TV, and VCR buttons at the top. The RCA remote for the TV has Cable, VCR and TV buttons at the top. How can I get rid of the snow and static sound?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 206 Answers

Sound like its all cabled wrong So its from the source, (wall satalight Whatever ) to VCR in then VCR out to TV, Now when the VCR fires up it tunes the RF output to Chanel 4 and has a strong signal, that over rides just about every thing. Simply way to stop this is one of two ways, press the TV/VCR button on the VCR, or simply turn off the VCR to let the signal pass through.

Posted on Mar 06, 2008

Yeah, you guys ****.

Posted on Jun 06, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have auto programmed the television, but it only shows white snow no matter what. I have also fine tuned it as well. The model is shownic lc26ce80r. Can you help


My personal guess would be that there is no signal coming through to your tv or the wrong signal coming through. I have the opposite problem...we get picture (snowy) but no sound except that of snow and the Audio/Sound options are NOT helpful. Wish I could be of better help.

Jan 28, 2011 | JVC AV-20220 TV

1 Answer

My jvc HR D170 ES vcr used to work fine when suddenly the picture ( snow ) is very bad but sound is ok ...tried to retune to my tv ...tried changing the rf at back ...tried tuning to my other tv and...


The vcr is fine. buy a cleaning tape. people say dry cleaner tapes wear out the heads, but it fixed my problem when my vcr only showed snow. but try a wet tape first. follow the instructions that came with the tape and run it a few times.

Jun 26, 2010 | Televison & Video

1 Answer

Mtisubishi TV (CRT), Model CS-2610R


that is because you do not have the correct input connected or the set needs to have a channel program redone

May 16, 2010 | Televison & Video

1 Answer

Just starte last day - turn on TV, (Sears model)


Bad solder on the mother board, chinese were sleeping, or bad tuner or processor chip due to temperature, Sorry pro help needed...


please rate!

Jul 10, 2009 | Televison & Video

1 Answer

Records snow/static - intermittently


Intermittent problems like this really suck.
I have a simular problem on my Toshiba DVD recorder. Once in a while it just doesn't record anything at all.

Unfortunately, there really is no solution. It sounds like a glitch in the unit to me. Wether or not it's present in all the units of that model or just yours, only Panasonic knows for sure.

Feb 14, 2008 | Panasonic DMR-ES40VS DVD Recorder/VCR

1 Answer

Channel Reception


It sounds like a defective tuner or a IF module as well. It may also be a defective capacitor(s) or cold solder joints inside the tuner circuitry. I woud suggest to use a VCR or a TV convertor connected to an Audio/video input to change channels instead of fixing it.
Good Luck.

Jan 21, 2008 | Sony KV-27V42 27" TV

1 Answer

No picture or sound


If you see only snow and the words "NO SIGNAL" are displayed, and you know that you have the set hooked up to a good signal and the TV is set to the right channel, it means that your tuner has stopped working and needs to be replaced. First, though, make sure your signal is good. A good way to test this is to hook the TV to a good VCR, put in a good pre-recorded tape and hit play. Tune the TV to channel 3 (or 4) and if it is still all snow, have the tuner replaced by a qualified tech.

Sep 03, 2007 | Sony FD Trinitron WEGA KV-32FS120 32" TV

3 Answers

Tv seems ok by static and now, no sound (or very faint)


The problem you're describing sounds like a tuner problem. BUT you say that you have the same problem with A-V input too. That's weird!!! Possibly the electronic TV-AV switching circuit is messed up and stuck in the TV (tuner) position. If this is the case you DO have a tuner problem and a switching problem too.

Jan 14, 2007 | Hitachi C29-F200 29" TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

871 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72670 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...