Question about Sharp UX B700 Plain Paper Inkjet Fax

1 Answer

SHARP UX B700 TRANSMISSION REPORT

TRANSMISSION REPORT IS BLANK. AFTER SOMETHING HAS BEEN FAXED A PLAN WHITE PAPER WITH NOTHING ON IT IS PUT OUT. I HAVE SET IT TO PRINT THE TRANSMISSION REPORT AFTER EVERY TRANSMISSION NOT JUST THOSE WITH ERRORS AS IT IS SET TO DO AT THE FACTORY.

Posted by on

  • 1 more comment 
  • kdad Apr 03, 2008

    Thank you for your help. This fax machine had been around my house for awhile when I brought it to work and I got to thinking that there was no ink or it had dried up and replaced the ink. That wasn't it but it probably did need more ink. It was a bit ago that I got it working. I think when I was changing the settings I didn't save it or it didn't take the new setting. Everything now is working fine. I only wish that the SHARP UX B700 would put out a facsimile or partial copy of the 1st page of the fax as some machines do. Thank you very much for your help, this is a great site.

  • Crooksy2 Aug 20, 2008

    When I try6 to copy or send a fax it comes up blank

  • dlcamacho Oct 01, 2008

    Today our machine started putting out blank paper. I tried copying, printing a transmission report and sending a fax from another machine here in the office, but all the paper comes out blank. I received a success ful transmission notice from the other office fax. I know we're placing the paper in the sending machine correctly. Anyone have any ideas?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 82 Answers

Does your machine show anything on the confirmation report like fax number,duration, pages sent, etc. or is the image just not being printed. If you have properly programed machine to show image on the confirmation report. I don't see anything that will cause that except your origianls may not right side up/down.

Thanks,

Mikey

Posted on Apr 03, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to stop to print the journal after send fax everytime?


Sending Confirmation
This report shows the fax number, the number of pages, elapsed time of
the operation, the communication mode, and the communication results.
You can set up your machine to print the message confirmation report in
one of the following ways (see page 5.3):
• Automatically after each transmission (ON)
• Automatically only if an error occurs during transmission (ERR)
• No report printed at all (OFF). You can print this report manually at
any time you want.
SENDING CONFIRM - A confirmation report shows whether the
transmission was successful or not, how many pages were sent, etc.
Select ON to print a confirmation report automatically each time you
send a fax.
Select OFF to turn this feature off.
Select ERROR to print only when an error occurs and the transmission
was not successful.

Nov 27, 2010 | Samsung SF-5100 Plain Paper Laser Fax

1 Answer

My HP 1040 fax prints a sending confirm notice after every fax is sent. Is there a way to turn this feature off as it is a major waste of paper.


Reports you can print
You can print these reports whenever you need to. Some of these reports can be set to print automatically also.
1. Press Report/Help.
2. Choose the report you want by using left or right arrow.
3. Press Start/Enter when the desired report is displayed.
4. The selected report will be printed.

Sending Confirm
A confirmation report shows whether the transmission was successful or not,
how many pages were sent, etc.
ON: prints a confirmation report automatically each time you send a fax.
OFF: never prints a confirmation report (You can print one manually using the
Report/Help button (see Print reports on page 51).
ERROR: prints only when an error occurs.

Nov 25, 2010 | HP 1040 Plain Paper Inkjet Fax

1 Answer

Coming from a law firm legal department background, I have been known in the past to run off too many docs on the printer/copier a kill trees. I am working very hard to start "greening" my...


Most faxes and MFP (multi function printers) can be set not to print the confirmation page with every fax. All these settings and many more can be found it the User Reference manual that came with the printer if you can't find yours one is available here:
http://www.fixya.com/support/p378618-hp_officejet_6110_all_in_one_inkjet/manual-3613

Page 37 "print reports" is what you're looking for

Nov 16, 2010 | HP OfficeJet 6110 All-In-One InkJet...

1 Answer

Brother IntelliFax-2820 Plain Paper Laser Fax does not automatically print a transmission report each time we send a fax. Is there a way to automatically have that happen. We can't find it.


You need to set up the Transmission Verification Report and Journal Period in the menu table.
Press Menu/Set, 2, 4, 1.
-OR-
Press Menu/Set, 2, 4, 2.
You can use the Transmission Report as
proof that you sent a fax. This report lists the
time and date of transmission and whether
the transmission was successful (OK). If you
select On or On+Image, the report will print
for every fax you send.
If you send a lot of faxes to the same place,
you may need more than the job numbers to
know which faxes you must send again.
Selecting On+Image or Off+Image will print
a section of the fax's first page on the report
to help you remember.
Note
When the Verification Report is turned Off or
Off+Image, the Report will only print if there
is a transmission error, with ERROR in the
RESULT column.
1 Press Menu/Set, 2, 4, 1.
2 Press ? or ? to select On, On+Image,
Off or Off+Image.
Press Menu/Set.
3 Press Stop/Exit.
Printing reports
1.XMIT Report
2.Journal Period

Nov 15, 2010 | Brother IntelliFax-2820 Laser Fax

1 Answer

Re: Fax Machine - Sharp UX-B700 Everytime I send a fax I get a print out if the fax was sent or not. A whole paged is use... this is paper waste... can it be stopped?


Yes you can stop it printing the report. Use the menu to cruise through the settings for fax. You will find the reports section and recognize that you don't want the memory storage report, so disallow it by pressing th no key.

Oct 06, 2010 | Sharp UX B700 Plain Paper Inkjet Fax

1 Answer

Intellifax 770 print transmission verification report for multipl


You can print an activity report by pressing FUNCTION, 7, 2, START. That will give you the last 30 faxes sent and received, It will only show that you dialed though, it will not be a true verification report. In case you need it, you can download the manual for your fax here:

http://pdf.textfiles.com/manuals/FAXMACHINES/Brother%20IntelliFAX%20770%20Home-Office%20Fax%20Machine.pdf

Dec 05, 2009 | Brother IntelliFAX 770 Plain Paper Thermal...

1 Answer

Dialing out to fax papers. Reaches the number but instead of taking the fax it prints out a report saying: transmission verification report -- NG: Poor line condition. I have never used this fax machine...


Perhaps you indeed have lots of interferences on your telephone line, or the recipient does.
It is also possible that the unit has been set for a different telephone line standard (for some other country) - check the manual for relevant settings. If you don't have a manual, go to Brother website and download one.

Nov 04, 2009 | Brother FAX-575 Plain Paper Thermal

1 Answer

How can I print a fax confirmation on a specific outgoing fax


Checking a report for the transmission result (?TX Report? function) A report containing the transmission results can be printed. The machine can be set to either print or not print the transmission report or to print it according to the machine setting or only when a transmission fails. To print the transmission report 1 Press the [Fax/Scan] key to display the Fax mode screen. 2 Touch [FAX Menu]. 3 Touch [TX Report] on the Set 1 tab. 4 Select how to output the report, and then touch [Enter]. ? Default: The transmission report is printed according to the previously specified method. For details, refer to ?Specifying report output settings (Report Settings)? on page 10-48. ? ON: The transmission report is printed with each transmission. ? If TX Fails: The transmission report is printed only if the fax could not be sent. ? OFF: The transmission report is not printed, regardless of the transmission result.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Aug 10, 2009 | Minolta bizhub 200 Copier

1 Answer

Hi how do I turn of tx and rx reports on faxcentre F110/


The machine can print a transmission (confirmation) report after each transmitted fax. This report indicates whether or not the fax has reached the intended recipient. Four different settings are available for the transmission report:
  • With: a report is printed when the fax transmission was successfully sent or when it is completely abandoned. There is only one report for each fax sent.
  • Without: no transmission report is automatically printed, however, the machine will save all fax transmissions that took place in memory. The faxes sent can be viewed by printing out a transmission log (report).
  • Always: a report is printed after each successful or interrupted transmission.
  • On Error: a report is printed only if the transmission failed or is abandoned.


NOTE: With each transmission report from memory, a reduced version of the first page is automatically reproduced.

To modify the report type setting:
  1. Press the [OK] button directly below the Display Screen. '1 Installation' and '2 Fax' will be displayed.
  2. Press [2], [5] on the numeric keypad. ‘25 >Send Report’ will be displayed.
  3. Press [OK]. The transmission report screen will be displayed.
  4. Press the up or down arrow button directly below the Display Screen to select a transmission report setting, then press [OK]. ‘25 Send Report’ will be displayed.

    NOTE: As the up and down arrow buttons are pressed, the menu will scroll through the available choices and move the greater than symbol (>). Stop when the greater symbol is in front of the appropriate selection.

  5. Press the [Stop] button on the Control Panel. The 'Date / Time' screen will be displayed

Dec 11, 2008 | Xerox FaxCentre F110 Plain Paper Laser

1 Answer

Sharp UX-117 display Wait a moment on power on and then no signal


I have not worked on a sharp ux-117 before, however most sharp fax machines are all alike when it comes to resetting this code. Turn the fax on while holding down the stop and start key don't let go until you see 1 =yes, 2=no for memory clear. press 1=yes. Some of the sharp fax machines have a small white rounded reset button. No guarantee but you have nothing to lose.

Dec 03, 2008 | Sharp UX B700 Plain Paper Inkjet Fax

Not finding what you are looking for?
Sharp UX B700 Plain Paper Inkjet Fax Logo

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

Anthony Karuku

Level 2 Expert

257 Answers

k24674

Level 3 Expert

8073 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...