Have you checked the HP hep site?
Here is their suggestion
This document explains how to transfer images from the camera to a computer running Windows XP operating system by using a universal serial bus (USB) cable.
Transferring the images
Follow the steps below to transfer images from the camera to a Windows XP computer.
Step one: Connect the camera to the computer
Step two: Transfer the images
Choose one of the following methods to transfer the image files:
Method one: Transfer images with the HP Photosmart software
Turn off the camera.
The camera came with a special USB cable for connecting the camera to a computer. Connect the large end of that USB cable to the computer.
Figure 1: Connect the USB cable
Open the rubber door on the side of the camera and connect the small end of the USB cable to the USB connector on the camera.
Method two: Transfer images without the HP Photosmart software
If you do not, or cannot, install HP Photosmart Software on your computer, you can still transfer images from the camera to the computer using the Picture Transfer Protocol (PTP) in Windows XP.
Follow the steps below to transfer images.
Make sure the HP Photosmart software is installed on the computer. If the software is loaded, then go to step 2. If the software is not loaded, click here to upgrade to the latest version of imaging and printing software (in English).
If images on the camera are selected for printing or selected for HP Instant Share destinations, make sure the computer is connected to a printer and the Internet.
Turn on the camera. The HP Import Photos software starts on your computer. If you have set the software to automatically transfer the images in the camera, the images automatically transfer to the computer.
Otherwise, in the Transfer images from Camera/Card screen, click Start Transfer . The images are transferred to the computer, and then if there are any still images that were previously selected for HP Instant Share destinations, those actions are started.
When the Image Action Summary screen appears on the computer, you can disconnect the camera from the computer.
Turn on the camera.
Windows will automatically launch a program to transfer the images.
When the images have finished transferring, disconnect the camera from the computer.
If you encounter problems, check that the camera USB Configuration in the Setup Menu is set to Digital Camera .
- While in Live View , press the Live View/Playback button, and then press the Menu/OK button.
Scroll to the Setup Menu using the left/right arrow buttons.
Use the up/down No pictures - c00280207.gifc="http://i.fixya.net/uploads/images/c00280207.gif" alt="c00280207.gif" class="h_mi" /> buttons to scroll through the Setup Menu to highlight the USB option.
Use tNo pictures - c00280208.gif arrow buttons to change the setting to Digital CameraNo pictures - c00280209.gifss the Menu/OK button.
To exit from the SetuNo pictures - c00591915.gifpress the Live View/Playback button.
Reconnect the camera to the computer.