Question about GE Profile Harmony DPGT750EC Electric Dryer

1 Answer

Dryer not heating

I have a GE Profile DPGT750 that is not heating and drying the cloths. Other than that it works fine just won't dry.


Coxie1011@Embarqmail.com

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 52 Answers

Your heating element is probably blown. It's not easy to replace it, but give it a try and stick with it. You can do it. Open the dryer door and look upward. You should see the screws holding the top front in place. The back usually slides out,or has two screws, one on each side on a piece of metal sort of like a hinge. Take off top and front, and then remove the drum. You will see the long round element in the rear. It looks like a long spring. Do not take the spring loose from the housing. The element comes with a new spring assembled to the new housing.. There are also several small thermistors in there that look about the size of a quarter. They should all be "closed" so that current can pass thru. Some thermistors look different. They look like the sharpened end of a pencil and are about an inch or less long. Pointed at one end and a wire coming out of each end. Replace this before replacing element. Or if you have a small volt/ohm meter, measure the ohms of the element. They should be quite low-----------300 ohms or less--------probablyi much less. If "open", then the element is bad. keever

Posted on Mar 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a GE profile dryer dpgt750 and it will not get hot only stay wsrm


you need to access the cycling switch and the sensors in the dryer heater/blower housing and possibly replace the drying sensor bars by the door on the unit

Oct 03, 2010 | GE Profile Harmony DPGT750EC Electric...

1 Answer

GE DBSR453GB Gas Dryer doesn't dry on 1st cycle.


Hi, If you have a gas dryer2_bing.gif.
The most common problem with a gas and no heat is the ignitor going bad...

Here is a tip that I wrote about that problem...

Gas Dryer2_bing.gif not Working Gas Dryer2_bing.gif Not Heating
http://www.fixya.com/support/r4398592-gas_dryer_not_working_gas_dryer_not

If your dryer2_bing.gif is electric2_bing.gif..
There could be a number of different problems...
Check out this tip that I wrote about this problem...

Dryer2_bing.gif Troubleshooting2_bing.gif Electric2_bing.gif Dryer2_bing.gif won t Heat
http://www.fixya.com/support/r3866345-dryer_troubleshooting_electric_dryer_won

heatman101

May 30, 2010 | GE DBSR453GB Gas Dryer

1 Answer

Dryer not drying clothing.


Hi, If you have a gas dryer2_bing.gif.
The most common problem with a gas and no heat is the ignitor going bad...

Here is a tip that I wrote about that problem...

Gas Dryer2_bing.gif not Working Gas Dryer2_bing.gif Not Heating
http://www.fixya.com/support/r4398592-gas_dryer_not_working_gas_dryer_not

If your dryer2_bing.gif is electric2_bing.gif..
There could be a number of different problems...
Check out this tip that I wrote about this problem...

Dryer2_bing.gif Troubleshooting2_bing.gif Electric2_bing.gif Dryer2_bing.gif won t Heat
http://www.fixya.com/support/r3866345-dryer_troubleshooting_electric_dryer_won

heatman101

May 24, 2010 | GE Profile Harmony DPGT750EC Electric...

2 Answers

My dryer dosen't dry my clothes


Check the exhaust tube for obstructions. If this is a gas dryer it needs airflow coming and going through that tube. This is always the cheapest, easiest first step.

Sep 05, 2009 | GE Profile Harmony DPGT750EC Electric...

1 Answer

GE Profile Electric dryer - not heat, damp clothes but tumbler works


first checkyour breaker it may not look like it is tripped but cut it off and on or maybe the thermo fuse or you element is bad you have to check proper voltage to parts

Apr 20, 2008 | GE Profile DPSB619ED Electric Dryer

1 Answer

Clothes are not drying


your blower motor is probably not working. enter the troubleshooting mode by pressing and holding my cycles and help at the same time for 3 seconds. this will tell you the problem. if blower is not getting up to speed you'll have to replace it.

Dec 03, 2007 | GE Profile Harmony DPGT750GC Gas Dryer

Not finding what you are looking for?
GE Profile Harmony DPGT750EC Electric Dryer Logo

Related Topics:

157 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Dryers Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

John Tripp
John Tripp

Level 3 Expert

4636 Answers

gbob59

Level 3 Expert

2963 Answers

Are you a GE Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...