I would like to know , if there is any way mode i can use on this phone, that would ONLY allow phone calls from my wife, daughter or her school to only come thru when i am sleeping. i work 7pm to 7am and this is becoming a problem because i have to keep the phone on regular mode in case of any emergencies and all calls are coming thru and waking me. any help would be appreciated. thanks
An expert who has achieved level 2 by getting 100 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 100 times.
Re: Need my sleep !!!
You could try downloading a silent ringer to use as a global default ringer (for when your sleeping) and set your wife, daughter, and school as a specific audible ring tone. Then when you wake up just change the global default back to an audible one.
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Technician (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This seemed to work for me;
1.) Reset the phones network settings 2.) Reboot the phone 3.) Put the phone in airplane mode 4.) Reboot the phone 5.) Take the phone out of airplane mode 6.) reboot the phone.
I read this on another website, and it seemed to work for me.
To reboot the iphone hold down the sleep/wake button, and the home button at the same time for 6 seconds (until the apple logo appears).
Click start,Run type desk.cpl Screen Saver tab | click on Energy Under desk or office settings frame, set all values to "never". Then click Advanced Options, you'll see a frame asking you what to do.
Just select the options to turn off sleep mode. check that out.
If you can't start this way,you need to try another monitor to change the setting above.
I had the same problem with my iPhone the only way I was able to fix it was to re-flashed the latest 2.2 firmware. Power phone off, power on by holding power and home at same time, hold power for ten seconds and then release still holding home key for another 30 seconds to put phone in DFU mode. Then plug into iTunes it will detect phone in recovery mode and allow you to re-image
I called HTC Touch customer support. Found out that using soft reset button on bottom right of phone corrected that problem. Also found out that another problem I've been having - not receiving calls when phone in sleep mode has been partially corrected by new software. I say partially because we have 2 of these. My wife's phone is now working reasonably well but mine still misses calls. I think my problem could be related to these phones not having very good receiving strength signals vs other ones I've had. I miss calls while sitting at my desk at work. Never had this problem with other phones in same location. I guess the internal antenna just isn't as good as other phones. I also drop a lot more calls with this on the highway than with other phones - that's why I suspect the phone and not the service provider.
1. File manager in ipcsuite
2. Find the file:
Then rename it to:
The sleep mode is only a power save mode. You may not have the machine in the correct fax receive mode. If the machine is on a line by itself it needs to be set to fax only, if line is shared with a telephone it needs to be in fax/telephone, if you share the machine with an answering machine it needs to be in TAD mode, and so forth.
Each time you press the MODE key it will change the receive mode. Most people hit this key by mistake and change the MODE and the unit will not pick up calls. Press the MODE key until you are in the correct mode.
To make sure the machine will print, press reports and then the 1, this will print a help list. If the help list prints you know that the machine works. Then check to make sure the machine is in the correct fax receive mode.