I have an emachine W3503. It seems to download

The eMachines W3503 uses an Intel D101GGC motherboard.

eMachines Support isn't going to show you squat.

This is Intel Support, and the download page for the Motherboard Manual, for the above motherboard,
(It's a PDF file. Give it time to download)

http://www.intel.com/support/motherboards/desktop/d101ggc/sb/CS-021718.htm

On the above page left-click on -

English Product Guide [PDF}
(In blue)

Need some information about that motherboard, or how to understand the Front Panel header pinouts on the motherboard, state in a Comment.

Sorry, but it appears that the EMachines model W3503 does not have a floppy disk drive installed. See this link: http://reviews.cnet.com/desktops/emachines-w3503/1707-3118_7-32178774.html

Floppy disks are obsolete at this point. If you have data on a floppy disk that you wish to retrieve, see about getting help from someone you know who might have one on their computer system, or visit a public library (you might be able to offload the floppy disk contents and e-mail them to yourself).

Most people use USB flash drives now. They are far more reliable and have enormous capacity. Definitely get one if you don't have it. The W3503 computer has several USB ports on it.

you need to repair your windows or the best solution is reinstalling windows

Hello,

If you are able to connect to the Internet, go to EMachine support site and download the drivers you need for your model pc. http://www.emachines.com/support/product_support.html

Good Luck
C2Solutions

The amber power light indicates that your computer has been "sleeping" or "hibernating" and usually all it takes to restart the computer is tapping a key on the keyboard. If this is not the case, try holding the Power switch down for 6-10 seconds to force the system off. Restart in Safe Mode and try to find the settings for Sleep/hibernate, open the control panel and open the Screen Saver. Select "Change Power Settings" and set it for "Never" on sleep and hybernate.

click here
hope it helps, vote 4 me thanks

1. The emachines W3503 has an integrated ATI Radeon™ X300 based graphics card. It has also a PCI Express (PCIe x16) slot available.

2. The emachines W3052 has a NVIDIA® GeForce®4™ MX graphics card. I'm not sure whether it is integrated or not, but I'm sure that if it is not, it will be an AGP graphics card. Since The emachines W3503 has a PCI Express (PCIe x16) slot available for installing a graphics card, the swapping of graphics cards between the 2 machines is not possible since they support different types of graphics cards.

Well you can use the following link to download & install the required drivers for your system...

http://www.emachines.com/support/product_support.html?cat=Desktops&subcat=W%20Series&model=W3503

reinstall the os

For Emachines W3503, download the chipset drivers for ATI Radeon® Xpress 200 at http://e4allupgraders.info/dir1/motherboards/socket775/D101GGC_downloads.shtml which provides all drivers for this model of computer.

This resolves Sm Bus Controller driver problem.

Also a good tool can be driver detective for emachines http://www.drivershq.com/Drivers/eMachines/W-Series/W3503/22605/22758/37169/Drivers.aspx

If you are recieving "Error 22: A critical error has occurred while initializing DirectDraw." while trying to play Diablo 2, Warcraft III, or World of Warcraft, it is because direct draw has been disabled. I reenabled mine by installing the catalyst at http://ati.amd.com/support/driver.html for Windows XP Media Center Edition - Radeon - Radeon X300 Series.. Then use the Catalyst Control Center to renable DirectDraw.