Well i was taking pictures and when i clicked to look at them the screen went black (but still giving off light) and the lens stayed open. I tried turning it on and off, looking for a reset button, but nothing works. its completely frozen, no lights come on or off, nothing, and i dont know whats wrong. help!!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
take off the back you are going to need a soldiering iron. once the back is off gently lift the lcd out of the holder. fallow the ribbon cable to the plastic hold down. with a very small flat head screw driver. pop up the tab. take off the front case cover on the bottom of the main board you will see the lcd red and black wire de-solider them remember how the go. fallow these steps on the other camera tfering the good lcd to the other unit. and reverse the steps. if you fell this is something you do not want to attack I will replace your lcd with you other units lcd for. 30.00 goto digitalcamrepair.com for more help.
I had something like this occur with a minot mini video camera only it locked up in the "On" setting, meaning I could see a display on the screen but could not turn it off. I suggest you look very closely for a reset hole at the bottom somewhere, a place where a safety pin or the straightened end of a paper clip could be inserted. If no Reset can be found, then try holding in the Power On/Off for as long as 90 seconds. This may clear the problem. I would also suspect no power due to low charge or no charge on the battery, battery installed incorrectly, or battery not charged up.
I would say that if you can take pictures it is just the lcd that is out on your camera. If it is not allowing you to take pictures all the time then there maybe a lens error. You can send it into repairs and they will tell you what it would cost to fix it.