Question about Intec Turbo Shock 2 (G7000) Game Pad

2 Answers

No instructions for programming

How do you program it?

Posted by on

  • 2 more comments 
  • sadisdick Jun 24, 2008

    need instructions for assigning buttons for turbo mode

  • Anonymous Feb 25, 2009

    how about programing combo moves with the intec 7005 controller cant seem to figure it out and intec dosent have instructions avail online.

  • K1122 May 11, 2010

    yes, but how do you change the speed? I remember on the in stuctions, when I still had them, you could change the speed of the turbo!

  • un4givn_80
    un4givn_80 May 11, 2012

    I figured out how to program it just now, by messing with it a while, trying to get X, Down, X to work...

    1 Press Program
    2 Press either R or L 2 (one combo for L2 another combo for R2)
    3 Do your button program (in my case X, D, X, D)
    4 Either let the program button stop flashing or press it again to set
    5 Press L2 or R2 to activate.


2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I figured out how to program it just now, by messing with it a while, trying to get X, Down, X to work...

1 Press Program
2 Press either R or L 2 (one combo for L2 another combo for R2)
3 Do your button program (in my case X, D, X, D)
4 Either let the program button stop flashing or press it again to set
5 Press L2 or R2 to activate.

Posted on May 11, 2012

I can't figure out how to program the thing either.

As for the turbo, you hold the turbo button down while selecting the button you want turbo for. You hold clear and select the button that has the turbo to turn it off.

Posted on Jul 27, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

GT3-R -can

This is a dual frequency transmitter. (315/390) You need to select one button to program the TYPE 1 frequency of 390 MHz. Here's how:

Backwards compatable programming instructions for GT3-R dual-band remote: This is a 3 button remote, which can be used to operate up to 3 garage doors using IntelliCode radio controls. This remote is defaulted to operate the new IntelliCode 2 Genie garage door openers, but you can also program individual buttons to operate other IntelliCode 1 (pre 2011) models of Genie garage door openers made from 1998 to present. To change a button to operate a pre 2011 IntelliCode opener, the default IntelliCode 2 setting must be changed to IntelliCode 1. An LED light on the remote displays which mode the remote button is in: Red = IntelliCode 1 / Green = IntelliCode 2 To set one of the 3 buttons to be IntelliCode 1 (red), follow the instructions below:
  1. Select a button on the remote that has not been programmed.
  2. Press and hold that button for 10 seconds. Both Red and Green LEDs come on and stay on.
  3. Press the same button twice to toggle IntelliCode selection from IntelliCode 2 to IntelliCode 1.
  4. Press the same button again to confirm toggle. the LED should be Red. The IntelliCode selection for this button is set to IntelliCode 1.
You are now ready to program the remote to your garage door. Follow accompanying instructions for "Programming to IntelliCode 1 Genie garage door opener," or see below instructions: Programming Instructions: Gently press the Receiver Learn Code button on the power head receiver of your Genie garage door opener (motor head on ceiling in garage). This small, black, unmarked button is located behind the light lens at the motor head and is nearest the floppy 6 inch antenna wire that protrudes from the motor head. When pressed, a radio signal indicator light will start blinking red for 30 seconds. After pressing the Learn Code Button, press your transmitter button twice for your system to grab the frequency and code it in. (Keep the transmitter you're tuning at least 2 feet away from the power head while tuning.) Press the transmitter button once more to test the system and start your door moving.

Jan 06, 2012 | Video Game Consoles & Games

1 Answer

I need some detailed instructions for programming the buttons on my Cyborg F.L.Y controller, with recommendations - - from someone familiar with computer gaming. i.e. a "Cyborg F.L.Y. for...

The best manual is on the support tab of the Programming Software.
If you need help in programming a specific key just let me know.

Also Saitek has som profiles now available on their page:

Hope it helps...

Mar 22, 2011 | Saitek Cyborg X Joystick

1 Answer

I need to know how to program it is there a manuall or somthing my game pad

Don't bother looking for a manual or insturction becuase i dont think they exist anymore. heres all you should need to know.

to program autofire

1. Hold autofire
2. Hold the button you want to autofire

to unprogram autofire use the same steps.

to "program" buttons

keep in mind any button can be programed to be a macro but i recommend using the E1 and E2 buttons. One button can be programed to perform at most 12 button keys

1. Hold the program button (til it lights up)
2. press the button you wish to program (wait for beep)
3. press one buton or create a sequence of buttons ( you must hear a beep for each button you want programed)
4. hold program again (til the lights off)

I havnt found any kind of reset to program you either have to program the button to itself or program over the old macros. I dont think it matters how fast or slow you program the keys i think it automatically times how fast the keys are pressed. you can even turbo your macrod buttons. i mostly use these for autoleveling and w-item in ff7. good luck and happy gaming.

Mar 21, 2011 | InterAct Accessories InterAct StormChaser...

1 Answer

I have bought myself a new computer with windows 7. i have tried to install my most favourite game, il2 1946. i cannot get it to install... what is wrong with it?

For complete instructions on how to get it working see , however the quick version is:
  • Insert disk
  • Do NOT use the autoplay installer. Navigate the disk, find and run a file called "a.exe". The game installation will start.
  • When the installer starts, choose "custom install" and make sure the installation folder is NOT inside C:\Program Files\ or C:\Program Files (x86). Windows is over protective of these folders and wont let IL2 (or you) change any game settings. Simplest is to create a folder called C:\Games and install it there.
  • Start the game. If you get a Securom error, go to and follow the instructions.
Or you can just buy GOG download version that has no copy protection and is compatible all the way to Windows 8.

Nov 19, 2010 | Ubi Soft IL-2 1946 PC

1 Answer

Instructions for programing game pad do not show how to program the pad. How can I get step by step instuctions?

Step by step instructions are too much to understand. I know how to set up gamepads... at least Logitech gamepads for now. I ve made several setups. You can ask me for setup for a game of your choice and i can try my best to help you. Visit this video for some of the most popular setups:

Apr 01, 2010 | Logitech Dual Action for Pc (963292-0403:)...

1 Answer

The joystick not functioning.

Hi there,

Here is the program you need IF you have windows XP :

Here is the program you need IF you have Windows 98/ME :

Then it is two ways to install the program:
1, see if by double clicking on the downloaded file it is coming a setup screen
IF NO setup screen is coming simply put your joystick in to the computer and a setup screen is coming here, follow the instructions on the screen and when it ask for the file, find it on the folder you have downloaded to.

select download on the link I gave you above, when you come to the site, choose download, then you come to a new site here you choose DOWN 1 and under there it is a link, press on that. Here iot should come a new window, and here you shall choose to "save" the file, you choose a folder so you can find the file again(ex documents) after and then choose "save". The file will be downloaded to your computer now :O)

IF the download screen does not starts, then try to look under your tabs in the browser, some times there it is a small stripe where it is writing : windows has prevent this site to send..... on that one simply right click on it and choose "download file"

Hope that helps
IF NOT then try to return here
Have a nice computing

Please rate my answer

Nov 25, 2009 | Saitek ST290 Joystick

1 Answer

Can I use the joystick as a mouse?

Yes I also have the logitech attack 3 joystick and I found a very easy to use program. Go to and download the program. Then follow the instructions. Before you start the program, make sure that your joystick is plugged in. Then, pick the last joystick on the drop down menu on the main menu of the program. There you go! When you are done, just go to the bottom right corner of your computer screen, and right click on the picture that looks like a video game controller. Then click on exit.

Jan 19, 2009 | Logitech Attack 3 Joystick

2 Answers

Lost programming instructions for sidewinder 2.could u e-mail me a copy, or tell me how i can find online. thanks dean b

you can get the pdf online. go here:

Dec 02, 2008 | Microsoft SideWinder Precision 2 Joystick

1 Answer

I have no instructions

in order to program the controller, you need to hold the button on the reciever for 10 seconds....during that 10 sec push a "face" button...usually 'X'. after a sec or 2 the green light on the reciever will go solid then turn off. now it should respond whenever you hit a button on your controller.

Nov 08, 2007 | Logitech Cordless Action (9633200403) Game...

Not finding what you are looking for?
Intec Turbo Shock 2 (G7000) Game Pad Logo

272 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intec Video Game Consoles & Games Experts


Level 3 Expert

3018 Answers

Sean Burke
Sean Burke

Level 2 Expert

144 Answers


Level 3 Expert

753 Answers

Are you an Intec Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides