- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi, for the oval lid (SCVS600) for less than $2.00, buy two 3/4 " long stainless steel #8-32 round head (Phillips) screws with self-locking nuts. Using a 5/32" drill bit, drill a hole through the handle at each of the two locations in the handle where the original threaded inserts were located (they are probably out since that is where the handle probably broke). (NOTE: Drill the hole in the handle at the same angle that the original screw makes with the handle because of the curvature of the glass, so that the new screw head will still set flush against the glass.) Using the original inside washer from the original screw, re-assemble the handle onto the lid. The 3/4" screw will not extend out past the top of the self-locking nut - it will sit below about 1 - 2 threads - but that's OK. This sould never break again.
easy fix go down to your hardware store and buy a big wooden knob (like you would put on a cabnet to open it) it will even come with its own screw for .99 ! . you will have to snap off with a plyers and a screwdriver whats left of the old knob from the lid . but this fix works great and looks good too !
For what it's worth, when the handle on my mother-in-law's crockpot broke, I went to Home Depot and bought a cheap wooden drawer knob (about $1 as I recall). I put a plastic washer between the knob and the glass and another under the screw head from the bottom (to prevent cracking the lid), tightened the screw and good as new.
J'aie un crok pot Bravetti de 7 pintes, c'est une petite merveille jusqu'à aujourd'hui car une de mes poignées s'est cassée lors de son utilisation. Je ne l'aie pas cognée, j'aie seulement pris mon crock pot ( qui était en pleine cuisson depuis 4 h00) par les deux poignées pour le changer de place sur mon comptoir de cuisine et crack, la poignée m'est resté dans les mains. Je n'ose pas imaginer ce qui aurait put arriver si il y avait eue un enfant près de moi lors du déplacement de mon crock pot Bravetti 7 pintes en inox. J'aurrais pu brulé quelqu'un pour le reste de sa vie....ATTENTION lors du déplacement de votre crock pot car les poignées ne sont pas solide du tout, je suis vraiment décue car j'adorais utiliser mon crock pot mais à partir de maintenant.....je vais y penser à deux fois avant de m'en procurer un autre Bravetti 7 pintes en inox.
I am Jo Anne Gomez who posted original problem and thought the problem was resolved with husband putting on a knob he found at the hardware store. Just wanted to let you all know that the handle we thought would solve the problem DID NOT....after he replaced the knob and we did another roast in it the lid totally shattered after we'd cooked another roast (luckily the glass did not get into the food), however, this is just a BAD PROBLEM and these lids should ALL be recalled. I have seen, just recently, the exact same crock pot and lid being sold for much less. I think that these crock pots should not even be sold but taken off the market to prevent lawsuits or horrible problems. Just wanted to let you know our solution did not work and Rival was not helpful at all.