- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Almost the same...difference that it printing anyway, even I see this E and inc lamp blinking....I know it was color cartridge left and dried out, but software tells that color cartridge is "connected not properly". Cleaned contacts...refilled ink....tried all buttons combinations...maybe, I need somehow to "null" this printers "brain"?
1. Refresh the Spooler.
To refresh the spooler, Go to Start, and in start search box or Run, type services.msc and press enter.
Now Remove the USB cable from the back of the printer.
Now on Services window, search for Print Spooler.
Make a right click on it and select Stop
Then Again make a right click on it and select start.
Perform the steps Stop---start 3 times.
Once done, close the services window.
Then steps to be done on the printer.
Press the Power button for 30 seconds while the Power cable remains out.
Then insert the Power cable. And power ON the printer, if it does not Turn ON automatically.
If the issue still persists, please post back.
fot resolve this issue you should try that get a self test print ,( demo print) if it is good you have a software problem and also you should install the dirvers . if the demo test print is not good you have a hardware problem about carriage and ink system and you have to replace the carriage system.
check whether its printing the test page properly directly from the printer not from the pc.for that print
1)just ON the printer
2)press the ON button
3)do not leave the ON button and lift the cover of the printer completely up and down 4times.
4)if you want to change the cartridges which front cover you will lift ,that you have to lift 4times up and down by pressing the ON button ,then leave the ON button the printer test page will come out of the printer .
5)keep the paper in the tray.
6)check that printout if its proper the printer is perfect
7)if the print is improper then the printer is having some problem.
8)also try changing the cartridges and see if its same or better prints comes out.