Question about Roper RAB2121KW Top Load Washer

1 Answer

Mo del RAB 1121EW1 serial number CG 402 1770

Model RAB 1121EW1 serial number CG 402 1770 Bought 14 years ago .It has been very reliable up to now , top loading 14 year old Roper ,fills, agitates and empties but doesn't spin . When I open the lid and depress the switch with a pointy thing , it drains but doesnt spin, therefore the lid switch is working . Does this model have a belt if so could it have snapped ? Thank You . Angelx

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 126 Answers

This is a direct drive washer so there is no belt. The drive coupler that connects the motor to the tub may need to be replaced.

Posted on Jan 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How old is Kitchenaid washer model number KAWS750JQ3?


Without the serial number I can not say exactly, but the only reference I can find (and the fact that no one sells this exact model anymore) puts the age at 13-14 years old. These were made in 2001.

Jan 03, 2015 | Washing Machines

1 Answer

I bought this used 6 mo. ago. the previous owners said it ran great but needed detergent dispenser that locks into the lid. searched everywhere to find one. got it, put it in, and it ran great aside from...


Hi and welcome to FixYa. I am Kelly.

Usually a suspension problem causes the detergent dispenser to break. A weak suspension strut socket strut & bushing Item 4 this link: http://www.appliancepartspros.com/partsearch/model.aspx?model_id=5169371&diagram_id=1327946#d1327946
will allow the tub to oscillate too much so the result is a broken detergent dispenser.
The procedure is on page 42 and 43 of this manual: http://www.appliance411.com/PDFdocs/16022808.pdf

Look at the picture of the rear strut on page 41 and ensure your rear struts are sitting in the mounts properly.

Rear struts are Item 7 this link: http://www.appliancepartspros.com/partsearch/model.aspx?model_id=5169371&diagram_id=1327945#d1327945

Lastly make sure the unit is level with none of the leveling legs allowed to float above the floor.

Once you solve the suspension problem you should no longer have beach dispenser breaking problems. Take some time and read the 1622808 manual (our Bible) above paying close attention to many of the notes from pages 40 - 45.

Thanks for choosing FixYa,

Kelly

Nov 04, 2010 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

What year is this model number?


Hi


You'll need the serial code to check for the year, the serial code is located on various locations. Please check this picture to search for your serial number--


024f786.jpg

After you find the serial number you can calculate the month and year of the washer by checking this coding list--

Code list for finding the year of manufacturing

Please post back for any further assistance.

Daniel

Jul 25, 2010 | Kenmore 98702 Stacked Washer/Dryer

1 Answer

I have a problem and want to know if it is worth fixing. Can you tell me how old this model is? Kenmore ultra fabric care ii heavy duty 90 series.the model is 110 92591220.


The manufacture date is determined by the SERIAL NUMBER on the appliance. The following link explains how to determine this on a Whirlpool manufactured washer:

http://www.fixya.com/support/r3576437-determining_the_age_of_your_whirlpool_ap

The second digit in the serial number determines the YEAR it was manufactured. The first two numbers following the second digit identifies the WEEK (52 weeks in a year).

I have personally worked on these model washers and they are reliable. The average lif expectancy is 15 years on most appliances, but some I have found to be 20 years old and higher. They are a simple desgin and easy to work on for consumers or repair technicians. Replacement parts are also fairly inexpensive for most common failures. If you need further assistance, please post back and explain what symptoms you have. I hope you find this information helpful.

Jul 02, 2010 | Washing Machines

1 Answer

Hello, information request (birth date)


The manufacture date is determined by the SERIAL NUMBER on the appliance. The serial number should be located along with the model number on a nameplate along the wash tub rim under the lid. Kenmore washers are manufactured by Whirlpool. The serial number format is explained in the following link:

http://www.fixya.com/support/r3576437-determining_the_age_of_your_whirlpool_ap

The second digit in the serial number will represent the YEAR in was manufactured. The first two NUMBERS following that second digit represents the WEEK (52 weeks in a year) that it was manufactured.

If you locate the serial number and still need assistance in how to detemine the age, post back and let me know. I hope you find this information helpful.

May 31, 2010 | Kenmore 3.2 cu. ft. Plus Top Load Washer

1 Answer

How can you find out the age of this model wwse3160aoww. I dont remember when I bought it. need that for my rebate.


You have the model number look at the serial number you will find the date in it wil be like xec099... etc year model 99 etc

Feb 17, 2010 | Washing Machines

1 Answer

Whirlpool washer age


Your washer was manufactured in March of 1993. The manufacture date is determined by the Serial Number. The second letter "C" represents the YEAR of manufacture. The first two numbers "14" represent the WEEK it was manufactured. The 14th week puts the manufacturing in late March. I hope this helps you.

Sep 02, 2009 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

I recently bought a used Maytag Washer. Is there a way to tell the year-model by the serial number or model number?? Thank you for your help---Gordon, at grsll@sbcglobal.net


The age is determined by the last two LETTERS in the Serial Number (the first letter is the YEAR, the second letter is the MONTH). If you post back with the information I can tell you when the washer was manufactured.

Jul 25, 2009 | Washing Machines

1 Answer

Washer will not spin or drain water


I have a roper washing machine model RAB 2121kw and about a year ago it did the same. I was at the machine when it tried to spin one day and i opened the lid and spun the drum by hand a few times then shut the lid and slowly the drum started spinning. One problem is that i have just moved the washer and i now have an oil leak. When the drum wouldn't spin i think the motor heated the oil seal on the gear case and now it leaks. I have looked into it and don't think its that hard of a thing to change.

May 24, 2007 | Roper RAB2121KW Top Load Washer

Not finding what you are looking for?
Roper RAB2121KW Top Load Washer Logo

152 people viewed this question

Ask a Question

Usually answered in minutes!

Top Roper Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Roper Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...