Question about KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

2 Answers

Kitchenaid dishwasher will not start

I've only had my kitchenaid dishwasher, model # kudlo1flss1, for a couple of years and have had not problems until now. It started with the last load, with horrible crunchy sounds. That load came out clean and I thought it was just a temporary glitch. However, when I went to start the next load, I get nothing. The light on the Normal load button comes on, but then goes off within a few seconds. I knew something was wrong when I didn't hear the usual start up sounds. Any help would be so appreciated!

Posted by on

  • Anonymous Apr 01, 2008

    Just installed a dishwasher...but it does not work ...panel lights come on when pressed..but the off on light starts blinking and nothing happens

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Had a similar problem. Held start button in for 10 seconds and then presses the cancel button and held both on for 10 seconds. Dishwasher works fine now. I had called Kitchenaid customer service and they said nothing like this would work. It is a computer!

Posted on Nov 25, 2011

  • Paul R
    Paul R Jun 17, 2014

    I had the exact same problem and this solution worked! Saved me a bunch of time tearing the thing apart and inspecting every item! Thank you very much!

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 351 Answers

Sounds like theres something stuck in the drain pump.hope this helps.

Posted on Mar 20, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kitchenaid whisper quiet plus dishwasher


It is likely the thermal fuse is cut off and will need to be reset or replaced depending on the model number of your dishwasher. Please provide actual model number in the comments.

Apr 25, 2014 | KitchenAid Dishwashers

1 Answer

Microwave won't heat for first minute - starts working normally after that.


The magnetron may be defective. You can replace the magnetron, there is no other possibility.

Jan 16, 2013 | KitchenAid KHMC1857WSS Microwave Oven

2 Answers

Dishwasher starts then pauses and drains.


Fixed! I had the issue where the cycle would start, the KUDS30IXBL8 would hum 4-5 times and then drain. Plastic folk pieces jammed in the disposer. These instructions took a few minutes (only 5 screws and a couple clips) to figure out how to take it apart, and it only took 60 seconds to put back together. How To Repair Dishwashers KitchenAid Repair Chopper Replacement

Apr 25, 2012 | KitchenAid Dishwashers

1 Answer

Our 15 year old kitchenaid dishwasher is suddenly leaving a white film on all the dishes. Never had this problem before and we are using the same detergent as always.


Hi,

The scum, film and white residueproblems have started since the reductionof phosphates in dishwasher detergents.

Here is a tip that will help you to solve the problem of films, residue, and scum in your dishwasher.

DishwasherResidue and Film on Dishes

heatman101

Apr 14, 2011 | KitchenAid Dishwashers

1 Answer

I have a KitchenAid KUD1021RWHO dishwasher that will not turn on when I hit the start button. The LED lights work when I press cycle selection ie. "normal" but when I press the start button...


Hello,
This is a very common issue on these units. The touch pad has failed. You can try to flip the breaker off for several minutes and see if that clears the code. More than likely the touch pad will need to be replaced.
You can purchase the part from the link below.
Appliance & Refrigeration Repair

Mar 24, 2011 | KitchenAid 24 in. KUDI02IR Built-in...

1 Answer

My new (less than 1 year old) Kitchenaid fridge (the model with the freezer at the bottom) has recently started to freeze the vegetables. The temperature setting is still at 38 degrees so I am not sure...


check the back of the vegetable bins to see if there is an opening that you can adjust. sometimes this slot type opening is in front or on the side and is there to adjust the amount of air/humidity

Jan 24, 2010 | KitchenAid 24 in. KUDI01FLSS Stainless...

Not finding what you are looking for?
KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher Logo

1,216 people viewed this question

Ask a Question

Usually answered in minutes!

Top KitchenAid Dishwashers Experts

Mike

Level 3 Expert

4336 Answers

Cindy Wells

Level 3 Expert

4985 Answers

yadayada
yadayada

Level 3 Expert

71338 Answers

Are you a KitchenAid Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...