Question about Televison & Video

Open Question

Vizio tv remote codes for dish 5.3 ir remote

Looking for vizio tv remote codes for a dishnetwork 5.3 ir remote

Posted by on

  • Anonymous Jan 09, 2009

    need manual

  • hikes_4_foot Mar 22, 2009

    my vizio remote justed stoped working and idk if its the sensor in the tv or if my remote was reset, so could i have instructions to reprogram my remote?

×

5 Suggested Answers

markevans
  • 148 Answers

SOURCE: Dish Network Remote

not every remote is capable of controlling every unit via remote codes. however, there is a set up in the manual that takes time to use. basically you will use the output from one remote to establish the same output for the new remote. its a step by step process. try a universal remote such as theater master which allows you to use a computer to control functions by assigning them to certain keys. this will be far easier. the mx700 is a capable unit for complex functions on multiple equipment and has a screen to guide you during actual use as to what each key is going to do. you will set up the specifications yourself, such as channel up or channel down, or menu or guide. you get to use already established key locations or choose from 10 along side the screen to state whatever you want, and then after its set up, those buttons do the work you programmed them to do.
good luck
mark

Posted on Dec 24, 2007

SOURCE: samsung remote code for dish net. not working

i am in the same boat as you bud

Posted on Jan 17, 2008

  • 518 Answers

SOURCE: dishnetwork remote codes for orion

The easiest way is to use the remote's "Code Search" feature.

Hope that fixed ya...

Geno

Posted on Apr 02, 2008

MerlinTech
  • 197 Answers

SOURCE: sharp tv dish network

that maybe the case..you could put a shielded barrier(copper coated poly) between them.sounds like it's a little too sensitive

Posted on Jun 20, 2008

MNfisherman
  • 11896 Answers

SOURCE: cant control volume with dish satelite remote

FIRSTLY

  • With the desired equipment on, press and release the Mode button until the light flashes behind the correct mode.
  • Using the tip of a pen or the eraser on a pencil, press the address button.
  • Enter the code (see links to find your code below) on the remote's numbered keypad for the equipment.
  • Press the Address button. If the code entered is valid for the remote, the mode light flashes three times.
  • To verify the code works, try several functions for that equipment. Some codes may provide partial functions or respond differently than the button's titled function. Try the other codes listed for that device until you find one that offers more complete functionality.
wHAT IS THE REMOTE MODEL?

Posted on Jan 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Code for TV/Video button on Dish remote will not change Vizio tv to other components.


Hi dclapper222, not all codes give our remotes full functionality; though we do have some other codes we can try!

A few of the codes for a Vizio TV that we have are 627, 66, 505, 222, 678, 232, and 458. You can find more codes or instructions at this link: http://www.dishnetwork.com/SupportSection/remote-setup. I have outlined the steps below to program your remote to your TV.

Addressing Remote to TV:

1.) Press and hold the clear TV button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter code and press #. The TV button should flash 3 times.
4.) Try functions (Volume, Power, etc..) and see if working.
5.) If no function, repeat steps 1-4 with another code.

Hope that helped! Let me know here if you have any other questions!

Tommy Faust
DISH Network

Jun 18, 2011 | DISH Network IR Remote Control

1 Answer

Bought a vizio tv works good it but the volume control is real hard to get it to pick up every thing else works ok. It has the right code in.


Hey sherryg98, it sounds like you have a right code, but may not be a code to give full functionality as there are many codes for a Vizio TV.

You can check out this link for more info on codes: http://www.dishnetwork.com/SupportSection/remote-setup

Some codes you can try are 627, 766, 505, 006, 232, 458, 500, 670, 678. Depending on the model of your remote there may be different codes available. I've given the steps to address a remote below just in case.

Addressing Remote to TV:

1.) Press and hold the clear TV button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter code and press #. The TV button should flash 3 times.
4.) Try functions (Volume, Power, etc..) and see if working.
5.) If no function, repeat steps 1-4 with another code.

If you need any further assistance let me know here or email me at thomas.faust@dishnetwork.com

Jun 15, 2011 | DISH Network IR Remote Control

2 Answers

Just bought a vizio tv Model #E470VLE, my dish remote will not control the mute or volume buttons now, how do I get it to do that?


Hey there, Cheri Torres with DISH Network Customer Service here. It sounds like you are going to need to readdress your DISH remote to your new Vizio TV. We have a few different codes for each of our different models of remotes. You will be able to locate the model number of your remote on the back of the remote at the top usually a two to three digit number with a decimal point. I will list here for you the best codes for Vizio TVs as well as the instructions for addressing the remote to your TV. I hope you find this information useful and if you have any further questions or concerns feel free to email directly at Cheri.Torres@Dishnetwork.com.

Codes for Vizio TVs
3.0, 3.1, 3.2, 3.4 IR remotes - 505, 671, 627 and 766.
5.0, 5.2, 5.3, 5.4 IR remotes - 627, 505, 506, 457, 111 and 520
4.0 and 4.4 IR/UHF remotes - 505, 627, 555 and 766
6.0, 6.2, 6.3, 6.4 IR/UHF remotes - 627, 505, 678, 825, 520 and 766
20.0 IR and 21.0 IR/UHF remotes - 505, 598, 627 and 773

Instructions for addressing your remote to your TV.
  1. Turn the Television On.
  2. Press and hold the TV mode button until all other mode buttons light up red.
  3. Enter the three-digit code using the buttons on the number pad.
  4. Press the pound(#) button once. Note: The LED will flash three times.
  5. Test functionality with the TV.
  6. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.

May 22, 2011 | DISH Network IR Remote Control

1 Answer

Need remote tv code for 42 inch Vizio tv?


Hey there, Cheri Torres with DISH network Customer Service here. I came across your post recently and wanted to help. We have a few different codes for each of our different models of remotes. The model number of the remote will be located on the back of the remote on the top usually a 2 to 3 digit number with a decimal point. I will list here for you the more popular models of remotes as well as the instructions for addressing your remote to your TV. I hope you find this information useful and if you have any further question or concerns feel free to reach me at Cheri.Torres@dishnetwork.com.

Remote codes for Vizio TVs.
3.0, 3.1, 3.2, 3.4 IR remotes - 505, 671, 627, 520 and 766
5.0, 5.2, 5.3, 5.4 IR remotes - 627, 505, 506, 457, 111, 520 and 766
4.0 and 4.4 IR/UHF remotes - 505, 627, 555 and 766
6.0, 6.2, 6.3, 6.4 IR/UHF remotes - 627, 505, 678, 825 and 520
20.0 IR and 21.0 IR/UHF remotes - 505, 598, 502 and 627

Instructions for address the remote to the TV.
  1. Turn the Television On.
  2. Press and hold the TV Mode button until all the mode buttons light up red.
  3. Enter the three-digit code using the buttons on the number pad.
  4. Press the pound(#) button.
    Note: The LED will flash three times.
  5. Test functionality with the TV.
  6. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.

May 10, 2011 | DISH Network 625 Duo DVR Receiver...

1 Answer

I have a new remote from dish , i need to program it to a vizio tv can you help


Hi, Cheri Torres with DISH Network Customer Service here. I came across your post and wanted to see if I could help. We have a few different codes for each of our different models of remote. You will be able to find the model of your remote on the back of the remote at the top usually a two to three digit number with a decimal point. I will list here for you the best codes for each of our more popular models of remotes and also the instructions for addressing your remote to your Vizio TV. I hope you find these codes and instructions useful and if you have any further questions or concerns feel free to email me at Cheri.Torres@Dishnetwork.com. Thanks and have a great day! :)

The best codes for each model of remote
3.0, 3.1, 3.2 and 3.4 IR remotes - 505, 671, 627, 677 and 766
5.0, 5.2, 5.3 and 5.4 IR remotes - 627, 766, 505, 000, 457, 111, 506 and 520
4.0, 4.4, 6.0, 6.2, 6.3 and 6.4 IR/UHF remotes - 627, 505, 678, 758, 520, 766 and 507
20.0 IR and 21.0 IR/UHF remotes - 505, 598 and 627

Instructions for addressing the remote to the TV
  1. Turn the Television On
  2. Press and Hold the TV mode button until all the mode buttons light up red.
  3. Enter the three-digit code using the buttons on the number pad.
  4. Press the pound(#) button once.
  5. Note: The LED will flash three times.
  6. Test functionality with the TV
  7. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.

Feb 17, 2011 | DISH Network IR Remote Control

1 Answer

I need code for vizio HDTV model P42HDe


Hey there, my name is Cheri Torres with DISH Networkcustomer service. I came across your post and wanted to see if I could help.DISH Network remotes have a few different codes for the different models of IRand IR/UHF remotes that we have. The model number you will need to look for isgoing to be on the back of your DISH remote at the top, usually listed as a twoto three digit number with a decimal point. I will list here for you a varietyof codes for our more common remotes and also the instructions for addressingyour remote to your TV. For the 3.0, 3.1, and 3.2 IR remotes the best codes forVIZIO are 505 and 627. The 5.0, 5.2, 5.3 and 5.4 IR remotes the codes are 506,505, and 627. For the 4.0, 6.0, 6.2, 6.3, and 6.4 IR/UHF remotes the best codesare 505, 520, and 627. The last codes you can try for 20.0 and 21.0 IR andIR/UHF remotes the codes are 505, 598, and 627. I hope you find these codes andinstructions useful and if you have any further questions or concerns feel freeto post back here or email me at Cheri.Torres@Dishnetwork.com.
Instructions for addressing your DISH remote to your TV.

  1. Turn the Television On
  2. Press and Hold the TV mode button down until all the mode lights light up at the top of the remote.
  3. Enter the three-digit code using the buttons on the number pad.
  4. Press the pound(#) button once. Note: The LED will flash three times.
  5. Test functionality with the TV
  6. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.

Jan 09, 2011 | DISH Network IR Remote Control

2 Answers

I need the code for a vizio tv. not in my book


I need the code for memorex dvd player to program it to my dish network remote

Jan 05, 2011 | DISH Network IR Remote Control

1 Answer

We just got a new vizio tv and we have all the same receivers. we have a 722 receiver but the ir remote will not work.


Hello Daniel Busa with Dish Network customer service here. Vizio tv's almost always program to 505 so try this code first. To program this hold the clear tv button down for about 4 seconds the other mode buttons will light up. Once they are all lit hit 505 and pound. If that doesn't take care of it use this link:http://www.dishnetwork.com/SupportSection/remote-setup

Dec 25, 2010 | DISH Network IR Remote Control

1 Answer

I need remote codes for vizio lcd tv


Hi there, this is Kimberly Escobar with DISH Network. Ran across your post and wanted to provide you with the information you need. some of the codes for a Vizio T.V are 505,671,627, and 766 you can find more information on http://www.dishnetwork.com/SupportSection/remote-setup this link can be very helpful and help you find codes you need for any brand of T.V.

Mar 13, 2010 | DISH Network IR Remote Control

2 Answers

Programing Dish Network Remote to control a Vizio Tv.


Try 627 for Vizio TVs - that should work on the Dish remote.

Dec 22, 2008 | DISH Network IR Remote Control

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

887 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72670 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...