Pin diagram for psc 8-0065-56 RS232 cable

This devices interface is extremely old technology the 9 pin connector is most likely a rs232 serial interface . If your laptop has a 9 pin rs232 interface you may need a DTE to DCE adapter .
if you do not have this old rs232 port on your laptop I think this device a usb to null modem rs232 DB9 Serial DCS Adapter Cable with FTDI.
http://www.startech.com/au/Cards-Adapters/Serial-Cards-Adapters/USB-to-Null-Modem-RS232-DB9-Serial-Adapter-Cable-DCE-FTDI~ICUSB232FTN
https://en.wikipedia.org/wiki/Null_modem
from my reading of the manual a null modem may be needed

Hello, you asked the driver behind the times reader PSC VS1000, succeeded ?, you could send me, you have the pinout diagram of the serial cable rs232 db9?
hug,
john son

Kindly check the Data cable ( RJ11) if connected properly, connector points turned green. Try Changing it.

hope below links help you


6 pin RJ12 6P6C male connector diagram and applications pinouts RJ12 to rs232
Pinout cable and connector diagrams usb serial rs232 rj45...

Ola

Bucsa aqui RS232 to USB adaptor Cable:

http://www.sealevel.com/store/serial/asynchronous-serial/usb.html?gclid=CIudlfrN6KoCFYgf4QoduSKKPA

Buena suerte.

Ciao.

there rs232 to usb cable converter, you just buy it, and you got rs232 to usb connetor

Hello!
What shall I do to communicate with a Combivert F5. I have tryed with different cables without success.
RPN/ Sweden

The pinout for that type of device is most likely in the yost format. It is a standard used with most pos equipment. You can get a diagram here : http://www.lammertbies.nl/comm/cable/yost-serial-rj45.html

Hope this helps
Jay

the problem is the Rs 232 connector is not all same,.the wire in the cable like my machine is different from usually printer does.

you need to buy a USB to serial converter, you can pick these up of ebay for about $5 or from GPS shops for about $30

PC Serial port - Stereo jack
Pin 2 - Ring
Pin 3 - Tip
Pin 5 - Sleeve