Question about ASUS M2N32-SLI Deluxe/Wireless Edition ATX Motherboard (1254095)

1 Answer

Installed first start up no video output on pny 8500gt's

I have just installed the motherboard and all components including 2 pny 8500gt's i tried to boot up the computer for the first time and got no video output have tried using a pci graphics card which did not work either have tried using just 1 card both no hgelp at all any ideas ??????

Posted by on

  • theshwag Apr 08, 2008

    yeah I am having the same problem no post just the black screen OD i am running

    9500 quad

    dual msi 8800 gts

    ocz 800 4 gigs (2 2gig sticks)

    1100 watt power supply

    seagate barracuda 250 gig sata

    dual asus dvd burners sata

    is now currently driving me insane any help would be great thanks


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has achieved Level 3.

  • Master
  • 518 Answers

Try unplugging all other devices like HD's, CD's, DVD's etc.. and see if you get video. If not, then it could be a cpu problem, memory problem, or even a bad mother bd. Also, if there are jumpers on the board, make certain they are correct.


Posted on Mar 05, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Asus rock G31M motherboard

are there any beeps from the motherboard. can you be a explain your problem more elaborately. if there are any beeps try to clean up your ram and try again

Jul 19, 2013 | Computers & Internet

1 Answer

No Display on boot up

When a motherboard does not beep that isnt good news and its either the Motherboard or CPU. Have you fot the FSB settings correct on the board? Is your power Supply Good? Does your graphics card need power and is it plugged in? Unfortunately the only way to findout exactly is at fault is through a process of elimination. Can you try a different power supply first? Also try removing the CPU and re-seating it. If not, then you need to try and get hold of another motherboard and see if everything works in that. If not then it could be the CPU. Diagnosing CPU or MOTHERBOARD is always tricky without spares. Good luck

Aug 30, 2007 | ASUS P5NSLI (0610839134670) Motherboard

1 Answer

Please give the list of compatible graphic card for this motherboard

Hi !
You can try this video card NVIDIA GeForce 8500GT 512MB PCI-Express x16 Video Card . It is compatible with that motherboard.

Dec 26, 2009 | Intel D945GCCR Motherboard

1 Answer

Installed a ECS GeForce6100PM-M2 into a custom built computer. Cpu is AMD Athlon 64 x2 6000+, Ultra 1000W PSU, 4 GB DDR2, 2-650GB WD HD SATA, 1-60GB ext WD HD USB, XFX 9800 GTX 512 MB DDR3. Now my problem...

If you're using an LCD monitor it's probably the monitor that's at fault. Since you've had this happen with both the onboard video and two different expansion cards, the motherboard is pretty well eliminated as the cause. It sounds like you are describing the monitor backlight going out. Next time the trouble occurs, look closely at the display and see if you can still faintly make out the video. Switching to a different monitor or repairing your current one should fix the trouble

Mar 28, 2009 | EliteGroup Computers & Internet

1 Answer

I am trying to install a new pny pci dvi video card and turn off the onboard vga adapter so the video card will work as primary display output. The pny instructions says to disable the onboard adapter...

BIOS will detect the new card..plug the cable to the new card.

before you install the new card make sure your BIOS support the interface card.

update your BIOS with latest version, before installation

Mar 20, 2009 | Computers & Internet

6 Answers

No display when i turn on pc

so..let me have 2 mainboards,two video preocessor and rammsso you have quite some possibilities.
fisrt of all I have to say that just clearing the bios is not a solution..would be better to update it,by downlaoding it from the manuufacturers site and after you made a bootable cd than under dos mode re write the bios..
however you cant see anything without a propper signal with new motherboard.
take the new mother board..
so..chech the rams.if you have more ramm dimms let only one in the board but be sure is the one near the proccesor slot and check it to be well inserted.
-put the video cards first the 8500 one,see what it an observation:if the hdd is damaged the computer runs showing you the dos mode/you are able to reach the bios
processor damaged-computer can run/blue screen with some infos/it is note  a rule that you can reach the bios
ramms distroyed or put starts/dos mode/able to work in bios
video card damaged -NO SIGNAL AT ALL
moather card damaged-No signal at all.
so think and pay attebtion to the details of the errors.

You can make different tipes if combinations and by elimination youll discover the faulty component.
from now I can only presume is the new mother board
good luck .its a booring work but is nothing you can do more
bye bye

Feb 06, 2008 | Abit IN9 32X-MAX Motherboard

2 Answers

Installing NVidia 8500GT XFX 256MB graphics to A8N-VM Motherboard

The chances are that you have an old motherboard which is not compatable with the new graphic card. Or you may be running windows 98 and are downloading the driver for xp or visa versa. The probable solution, will be to sell the new card on ebay and buy the best old card you can off ebay. Or just make do with the card you already had in your computer. If you are determined to have a better graphics card. A motherboard upgrade with better graphic card may be the best answer or buy a better spec pc second hand if you don't have much money. You'll probably waiste a lot of time trying to get the new card to work and it probably never will.

Jan 28, 2008 | ASUS A8N-VM Motherboard

1 Answer

Installed GeForce 8500 GT PCI-E video card and pc will not turn on

If your mboard has a builtin video card you should configure that b4 u can use that add on card.

1. connect the add on card.
2. connect the monitor to the built in VGA.
3. start system and press "F2 or Delete" to go to bios setup.
4. on bios setup " refer to the manual on installing addon PCI express card".
you find it here:

or enlosed in the board.

After configuring your system restart and unplug in the wall outlet and then connect the monitor in the add on card.

Hope you find in order.

Jan 18, 2008 | ASUS P5GD1-VM Motherboard

Not finding what you are looking for?
ASUS M2N32-SLI Deluxe/Wireless Edition ATX Motherboard (1254095) Logo

Related Topics:

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top ASUS Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18346 Answers


Level 3 Expert

761 Answers

Are you an ASUS Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides