Question about Sanyo PLC-SW30 Multimedia Projector

1 Answer

Sanyo plc se15 no light output

Hi all,hoping you can help with my problem.Ihave been given a sanyo plc se15 projectoe but with no lamp originally,the "lamp"indicator and "lamp replace indicator"were originally lit but when i have installed a new(23hrs use previously) lamp i have no light output and these 2 indicators are still lit! what voltage should i have on the lamp terminals(i a fully qualified electrician btw) is there some sort of reset procedure as i dont have any instructions etc

thanks in advance for any help

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I all,hoping you can help with my problem.Ihave been given a sanyo plc se15 projectoe but with no lamp originally,the "lamp"indicator and "lamp replace indicator"were originally lit but when i have installed a new(23hrs use previously) lamp i have no light output and these 2 indicators are still lit! what voltage should i have on the lamp terminals(i a fully qualified electrician btw) is there some sort of reset procedure as i dont have any instructions etc

thanks in advance for any help

Posted on Mar 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an Sanyo PLC-SU07E Multimedia projector. I


1,Turn the projector on,press the Menu botton
2,Press the Left ,Right,Up or Down to find the "lamp usage" and the reset option.
3,select "Lamp replacement counter Reset ?"
4,select "Yes"

Jerry China
Tel: +86 131788 67858
E-mail: lampdeng@hotmail.com
Skype: lampdeng.com
YM: lampdeng@yahoo.com
http://facebook.com/lampdeng
http://www.lampdeng.com

Aug 09, 2013 | Sanyo PLC SW20A Multimedia Projector

1 Answer

Sanyo plc-xt16 Projector After the projector is turned on and the countdown finishes on initial start up the projector shuts itself off within 5 seconds. The fan runs for 1 minute and then the projector...


It sounds like the lamp is going.
Do you know how many hours of use are reported on the lamp?

Many times these projectors have circuitry to shutdown when they suspect the lamp is near the end of life. Lamp hours vary and usually will go up to and even beyond expectancy, but there is occasions you can receive a bad lamp and have it blow in a matter of hours...not common but it does occur.

I hope this helps,
Magoo

Mar 09, 2011 | Sanyo PLC-XT16 Multimedia Projector

1 Answer

Sanyo PLC-XU33 multimedia projector. Starts up, goes through countdown, stays on for a minuit after that, then bulb goes out and it goes into shutdown?????? Rob,


hi,
check the video inputs. if there is no video input then the projector will goes off after count down.
also check that is the lamp replace light lights up or not. if its lights then you have to change the lamp and then reset the lamp hour.
ok

Jan 19, 2011 | Sanyo PLC XU33 Multimedia Projector

1 Answer

When you press the power button the projector light is green for a moment and making a sound as if it is turned on but no screen appears then after a few seconds the red light comes on. The lamp replacment...


Hi,
I hope our talented expert would have given you helpful and correct info in chat session from related service manual, feel free to ask further help if required.
Thanks.

Sep 30, 2010 | Sanyo PLC XU35 Multimedia Projector

1 Answer

Plc-xu105 will not restart. red on, no fans


SAYA MEMPUNYAI SANYO PLC XU105 , JIKA DIHIDUPKAN POWER LAMP MENYALA HIJAU BEBERAPA DETIK KEMUDIAN LAMPU WARNING LAMP MENYALA, KIRA KIRA KERUSAKANNYA DIMANA YA..? TOLONG YA SOLUSINYA..THKX

Feb 19, 2010 | Sanyo PLC-XU105 Projector

3 Answers

Lamp comes on, but goes off after 30 sec-1min


Sounds like it is overheating. The light must be green when turned on. If the light is red it needs to cool before proceeding.

Oct 07, 2008 | Sanyo PLC XU35 Multimedia Projector

Not finding what you are looking for?
Sanyo PLC-SW30 Multimedia Projector Logo

Related Topics:

370 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Multimedia Projectors Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

68157 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

5605 Answers

Are you a Sanyo Multimedia Projector Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...