Question about Computers & Internet

1 Answer

Limit or no conectivity problem

Hi everyone...i'd like to share my problem w/ u and hoping someone will solve this problem...
-------------------------------------------my problem is this--------------------------------------
Network = Using CrossCable Only
COMPUTER A = Serve as the Server where in ISP is directly connected
COMPUTER B = w/c is the client
ISP = My Destiny and Ip address is set automatically
Problems are:
1.) COMPUTER A can't access COMPUTER B as well as COMPUTER B can't access COMPUTER A
2.) When internet was shared it gives me the message "COMPUTER A's IP address will automatically set to" but when it is shared already COMPUTER A connection appeared limited or no connectivity
3.) When i set COMPUTER A's ip address statically as the message limited or no connectivity appeared gone but i still cannot access COMPUTER B as well as COMPUTER B can't access COMPUTER A and also there is no INTERNET but appeared connected
4.) when internet is not shared and COMPUTER A are statically configured as still both COMPUTER can't see each other and there is still no Internet
---------------------QUESTION's -------------------------------------------------------------------
1.) how can i share my internet w/ out receiving LIMITED OR NO CONECTIVITY to COMPUTER A


Posted by on

  • redthepogi Mar 07, 2008

    hey psybheng.........

    anyway later i will try to do this but now let me thnk u for time u rendered w/ my message.........hopefully this one work tnx again......i'll be back tnx



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 47 Answers

I understand that you are using the Windows Internet Connection Sharing to share your internet connection to your other computer.

If you don't have a router to share the connection then you are using Windows ICS connection.

When you enable ICS, the network adapter connected to the local area network is assigned a static IP address of

You can check this site for more information

You can try to connect the two computers first without the internet connection.

Example : PC A
You can set the IP addresses manually, just set the tcp/ip properties and from that area you can set the IP address manually.

And for PC B
You dont need to set the ip address for the gateway and dns since you are just testing the connection of the two computer.

They should belong to the same workgroup example HOME and set the computer name to PC1 and PC2.

You can right click MY COMPUTER then select PROPERTIES then you will able to see the computer name.

To start the wizard
Choose Control Panel from the Start menu.
Click Network and Internet Connections, and then click Set up or change your home or small office network.

Posted on Mar 05, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

3 Answers

Solutions for maths 2b telugu akademi

Interesting article! Thank you for sharing them! I hope you will continue to have similar posts to share with everyone! I believe a lot of people will be surprised to read this article
fb login

Feb 17, 2013 | Cell Phones

1 Answer

When I call someone or thye call me I can barely hear them.

Hi there

The speaker of your phone has gone bad and the best solution is to get an expert to change it for you.

To solve the problem of everyone listening to your conversation while calling, you should connect a an earphone to your phone to use to make your calls.

Thank you for visiting fixya

Mar 06, 2010 | Motorola Mobility RAZR V3

1 Answer

Need a keygen to use office 07 enterprise says hte code i have has used up its limits of use ex hubby shared his with me i need it on my other pc.

Have you ever reinstalled the software? If you did when you re-enter the product key you'll get an error. Microsoft is a real pain in the **** when it comes to re-installing. (they assume everyone is stealing the software). I guess Bill Gates is afraid he'll lose some of his $50 billion. Try calling MS support. If your lucky, you'll get someone with a heart and they'll set you up with a new key.

Jan 18, 2010 | Computers & Internet

1 Answer

1) how can i do traffic control on my TP-Link TL-R402M router. because some1 in mu house keep watch movie from . 2) how can i setup to let everyone only have limited access to surf website and...

step 1. start windows control panel administratrio, service ->file folder share... you can manage you profile share file or folder and who want to access here ...
step 2 You can click on control panel internet option
and you look a much tab can you setting to limitted access

Nov 12, 2009 | Computers & Internet

2 Answers

Limiting Bandwidth via routher

You need to introduce either a firewall or a proxy server in the middle, which could provide this facility.

Sep 14, 2009 | ASUS WL-600g Wireless Router

1 Answer

How to share internet conection between two computers using vista


You need a router or an modem with more then one outgoin port to share an internetconnection betwin pc:s


Feb 13, 2009 | Compaq Presario 700 470024-192 Notebook

2 Answers

Flat Rev At 9500rpms

Not being well familiar with the ZZr's however what is the Red LIne on this particular model? if it is around 10.000 then your rev limiter is kicking in stopping you blowing the engine.
Hope this helps!
Paul 'W'
Onyer~EDson(:0) {#><U.K.

Jan 16, 2009 | 1997 kawasaki ZZR 400

1 Answer

Lan internet


the easiest way to setup internet on the laptop, is to go to control panel, and launch the network setup wizard. this will enable you to setup a new network, and scan for a local area network connection. this will also give you access to the troubleshooter. to solve any connection problems or issues, should there be any. If your using a wireless method. Your PC must also be able to transmit/receive wireless Signals. If hardwired you,ll have to use the network setup wizard, as this will auto determine I.P And any other DNS settings et,c.

Hope this Helps Mike @ compurepair.

Jan 14, 2009 | Toshiba Satellite Pro L300 Notebook

2 Answers

Starter not turning over no spark

cheers for any helpSeems odd normally like mine there is a starter solenoid?? I got odd starting problems, I think solenoid. You should have a big 12v in and out. The plug in centre should carry a signal from the switch to initiate the solenoid and give the starter its voltage. Try checking this with a multimeter. I also found the connections under the dash/behind headlights were SERIOUSLY corroded, could be worth checking.,,,

Nov 10, 2008 | 2001 Cagiva Mito 125 Evoluzione

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

331 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers


Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14162 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides